What Size Are The Spacer Washers For The Pro Series Weight Distribution System?

Question

Question:

Hello, Do you know what size the spacer washers are for pro series weight distribution hitch #49901 and do you sell them? Thank you.

asked by: Robert

0

Expert Reply:

The spacer washers you mention, for your Pro Series Weight Distribution System # PS49901 (NLA), are 1/2", and have an outer diameter of 1". We do carry them, and you can get them here # 3306.

expert reply by: Bryce D

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

If you have a Reese weight distribution system then we have replacement bolts and washers #58133. The bolts are not stainless steel or chrome. For that you would have to get some locally rated grade 8. If you want just the washers use #58024.

view full answer...

Answer 5

Yes, the conical tooth washer needs to be positioned so that the teeth face the hitch. That is what prevents it from coming loose. Take a look at the video I have linked. At about the 1:50 mark the installers start to put the hardware on to mount the…

view full answer...

Answer 6

Part #58024 is one pair of square washers with teeth for Weight Distribution heads.

view full answer...

Answer 7

I was able to pull the Reese Conical Toothed Washer #01292-008 from our warehouse and measured the outer diameter at 1-1/4 inches.The inner diameter is 1/2 inch.

view full answer...

Answer 8

If the conical washers on your EAZ weight distribution hitch are 3/8" washers, then the Draw-Tite Trailer Hitch Conical Tooth Washers - 3/8" Diameter #01292006-020-01 would work just fine. Since it's just a conical washer you're…

view full answer...

Answer 9

I spoke to my contact at Kat's and they informed me that the Kat's Heaters Handi-Heat Magnum Magnetic Heater part #KH1190 draws about 3 amps of current.

view full answer...

Answer 10

Hi Michael; the washers are only available with the complete Replacement Ball Mount Hardware Kit for Reese Pro Round Bar WD Hitch - Spacer and Bolt Service Kit #RP38KR. Reese doesn't offer them separately. It wouldn't be a bad idea to have…

view full answer...