bing tracking image
  1. Accessories and Parts
  2. Equal-i-zer
  3. Weight Distribution Hitch
  4. Hardware
  5. Bolts
  6. Equal-i-zer
Replacement Bolts for Equal-i-zer Weight Distribution Head - 6,000 lbs to 14,000 lbs GTW
Equal-i-zer

Replacement Bolts for Equal-i-zer Weight Distribution Head - 6,000 lbs to 14,000 lbs GTW

Part Number: EQ90-02-9100
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$25.08
Retail:$48.96
You Save: 49%
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This pack includes 2 replacement bolts, 1 spacer rivet with washers for adjusting head tilt, and the required hardware for mounting your Equal-i-zer weight-distribution head to an adjustable shank. 1-800-940-8924 to order Equal-i-zer accessories and parts part number EQ90-02-9100 or order online at etrailer.com. Free expert support on all Equal-i-zer products. Great prices and Fastest Shipping for Replacement Bolts for Equal-i-zer Weight Distribution Head - 6,000 lbs to 14,000 lbs GTW. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (78)
  • Q & A (0)
  • Videos (1)
  • Photos

Equal-i-zer Accessories and Parts - EQ90-02-9100

  • Weight Distribution Hitch
  • Hardware
  • Bolts
  • Equal-i-zer
  • Equal-i-zer

This pack includes 2 replacement bolts, 1 spacer rivet with washers for adjusting head tilt, and the required hardware for mounting your Equal-i-zer weight-distribution head to an adjustable shank.


Features:

  • Replacement hardware fits Equal-i-zer weight-distribution heads rated for 6,000 lbs - 14,000 lbs GTW
    • Secures head assembly to adjustable shank (sold separately)
  • Pack includes (2) 3/4" diameter x 5" long bolts, 1 spacer rivet with washers for adjusting head tilt, and the necessary washers and nuts
  • Made in the USA


90-02-9100 Equalizer Bolt Pack - 6K to 14K





Video of Replacement Bolts for Equal-i-zer Weight Distribution Head - 6,000 lbs to 14,000 lbs GTW

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for All About the Replacement Bolts for Equal-i-zer Weight Distribution Head

Today we're gonna take a look at the replacement bolts and hardware for the Equalizer Weight Distribution Head. Now this replacement hardware fits the Equalizer Weight Distribution Heads that are rated for 6,000-pound to 14,000-pound gross towing weight capacity. This will secure the head of some weight to the adjustable shank. The adjustable shank we do sell separately and it also has the space rivet with washers for adjusting head tilt.The pack includes everything shown here on the table. Two of the Grade Eight 3/4-inch diameter, 5-inch long bolts, four of the 3/4-inch flat washers, two of the 3/4-inch lock washers and two of the 3/4-inch nuts. And again over here is the half-inch diameter spacer rivet with eight of the half-inch washers.

And these parts are made in the USA. But that should do it for the review on the replacement bolts and hardware for Equalizer Weight Distribution Head.

Customer Satisfaction Score:


Customer Reviews

Replacement Bolts for Equal-i-zer Weight Distribution Head - 6,000 lbs to 14,000 lbs GTW - EQ90-02-9100

Average Customer Rating:  4.9 out of 5 stars   (78 Customer Reviews)

This pack includes 2 replacement bolts, 1 spacer rivet with washers for adjusting head tilt, and the required hardware for mounting your Equal-i-zer weight-distribution head to an adjustable shank.

by:

I bought a hitch from someone who previously owned a pull behind travel trailer but no longer owned it. The original hardware from the hitch showed some use and the nuts had some slightly rounded edges and was missing the spacer river and washers so I purchased this replacement hardware kit from e- trailer. It arrived very quickly
I was able to replace the existing hardware as well as the missing spacer river and get the hitch adjusted for my truck. The only thing I think the kit should have by lock type nuts instead of nuts and lock washers.



by:

Overall a fine set of bolts. I was actually surprised that the single bolt that goes near the bottom and faces the rear wasn't included in the replacement. Perhaps it isn't considered necessary to replace or easy enough to find on its own. Not sure what that bolt is called. It's below the pin and washer assembly and screws in from the opposite direction and it is 90 degrees to the big nuts and bolts. Shipping was a bit slower than the site indicated initially, but still arrived in time for my rebuild to finish before my next outing.



by:

Bolt kit for Eualizer hitch exactly what I needed. Excellent price and quick shipping was a factor in purchase decision.



by:

Quick and easy replacement. No issues.



by:

Delivered quick! Replaced my old bolts that were needing replaced. Quality service as always from E-Trailer.



by:

I needed an Equalizer hitch bolt asap, and etrailer helped me. Since I needed rush shipping I called and the customer service rep Lori B knew right away to give me the part I needed with 2 day shipping at a very good price. I'm completely satisfied.

Richard profile picture

Richard

6/28/2019

no complaints, works as intended.



by:

Awesome CS from being able to locate (2) sets of these bolts online & even though at a higher price then on [another online retailer]( couldn’t get to us till > 3/26/21) Robert my CS phone rep was able to get them in the mail immediately for our airstream trip to 3 states. The bolts arrived & my hubby already switched them out for the old ones & he’s tickled pink !! etrailer went above & beyond & communication each step of the way from receiving to shipping to follow up is appreciated !

Pam profile picture

Pam

3/22/2022

Exceptional &amp a great peace of mind while our 2006 AS Safari is on the road !



by: 06/24/2022

Perfect replacement set!!!!



by:

The socket worked well.
The bolts were
the wrong size, and therefore useless.



by:

Great service. Great fit.



by:

Order is accurate and delivered on time



by:

Worked great to rebuild my existing Equalizer hitch that I’ve had for 12 years.



by:

The primary delivery of our anti-sway system came quickly and intact but for one of the spring bars. I was not able to attend to this matter due to professional responsibilities. Calling the 800 number I was prepared for standard issue ineffectiveness replete with language and accent disorders. I was pleased to access Heather who is an American of same nature and understanding and we were able to gain a replacement spring bar that also came quickly. I thank etrailer and commend Heather on her efficiency and warm accord.



by:

Great product



by:

My old hitch bolts and washers were getting pretty worn so, I'm looking forward to replacing them with this new set.



by:

Thank goodness for this hardware pack. I was missing hardware from my full 10k hitch purchase due to UPS mishandling. [online] refunded 15% which allowed me plenty of $ to get these replaced through etrailer. On time and exactly what I needed with a few extras .



by:

All fasteners needed for the hitch head except the angle set bolt. That set bolt came already installed on the hitch head. Fast shipping.



by:

Works as advertised. Trailer pulls without issues or concerns. Only negative is metal on metal squeal when turning despite liberal use of Equil-i-Zer grease.



by:

Good quality equal-i-zer parts needed for trailer hitch upgrade project.
Etrailer was great getting it all together at the best price.



by:

Good heavy duty bolts. But little long for the equalizer head I have. Had to use several washers



by:

Perfect fit and fast shipping. One of my bolts became stripped and needed a replacement. Allowed an easy replacement with no issues if I had the right bolts or not.



by:

Great experience ordering parts I needed. The parts were shipped exactly the day they promised. Definitely would use etrailer again. Thanks again.



by:

I am thrilled with the mechandise I ordered. I was amazed at how quickly it was delivered!

Vivien H. profile picture

Vivien H.

1/29/2019

Still going strong!

Vivien H. profile picture

Vivien H.

1/29/2019

GREAT!



by:

The peace of mind that comes with replacing the hardware while replacing the drop shank is well worth the money.



by:

Exact replacement bolts and all still g ood


25
78
Show More Reviews

See what our Experts say about this Equal-i-zer Accessories and Parts

  • Replacement Head and Shank for Equal-i-zer 6K Weight Distribution System
    In order to complete your Equal-i-zer Weight Distribution System part # EQ37060ET you will need a few different components which I have attached for you below. Replacement Head for Equal-i-zer Weight Distribution Systems part # EQ90-02-0600 Equal-i-zer Weight Dist Shank part # EQ90-02-4100 2" Hitch Ball for Equal-i-zer Weight Distribution Systems part # EQ91-00-6080 Replacement Bolts for Equal-i-zer Weight Distribution Head part # EQ90-02-9100
    view full answer...
  • Replacement Hardware Kit For Blue Ox SwayPro Weight Distribution Hitch
    It does seem like the hardware would come with what you ordered but unfortunately it is sold as a separate item. There is not a hardware kit from blue ox specifically for the SwayPro hitch. What you will need is pair each of Grade 5 zinc-plated 3/4”-10 x 4” hex head bolts, 3/4”-10 hex nuts, and 3/4" washers. We carry a hardware kit from Fastway # EQ90-02-9100 which will contain the hardware you can use. Or you may be able to find good hardware locally. Just make sure the bolts are a grade...
    view full answer...
  • Replacement Washers for Equal-i-zer Weight Distribution System
    The Replacement Bolts for Equal-i-zer Weight Distribution Head part # EQ90-02-9100 contains four 3/4" flat washers that go on the bolt that attaches the head to the shank (see photo (#17)). If you instead need the washer that controls the head tilt (see photo (#26)) then you will need to use the Replacement Spacer Washer for Equal-i-zer Weight Distribution Head part # EQ90-04-9110 instead. The Equal-i-zer Weight Distribution System does not come with any conical tooth washers, at least...
    view full answer...
    Image 1 for
  • How to Upgrade 12K Equal-i-zer to 14K Eqaul-i-zer
    I'm not sure how to find out the age of your setup, but when I passed your photos along to my contact at Equal-i-zer he said that all you need to do for the upgraded system is swap out your 12K head unit for the 14K # EQ90-02-1400. Since your hardware looks like it's seen better days you might also consider replacing those with part # EQ90-02-9100 while you're at it. The reason you only need to swap out the head is because the 12K and 14K Equal-i-zer systems both has the same size bars...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Replacement Head for Equal-i-zer Weight Distribution System with 12,000 Pound Capacity
    For your Equal-i-zer Weight Distribution System with a 12,000 pound towing capacity, you will use the Replacement Head # EQ90-02-1200. This head will fit all Equal-i-zer weight distribution systems that have a maximum towing weight capacity of 12,000 pounds and tongue weight capacity of 1,200 pounds. If you also need replacement bolts, you can use part # EQ90-02-9100.
    view full answer...
  • Torque Rating for Installing Equal-i-Zer Weight Distribution Head on Shank
    For the head of Equalizer systems the torque rating is tighten the angle set bolt until it comes into contact with the shank and lifts the head to where the spacer rivet also comes into solid contact with the shank. Tighten the angle set bolt an additional 1/2 turn.
    view full answer...
  • Equal-i-zer Replacement Hitch Head Shank Bolt Socket Size
    The 5/8" diameter x 4-1/2" long bolts and nuts in the 4k Replacement Bolts for Equal-i-zer Weight Distribution Head # EQ90-02-9400 are both 15/16" head sizes. The 6k-14k Replacement Bolts for Equal-i-zer Weight Distribution Head # EQ90-02-9100 are both the 1-1/8" head size that you are looking for. These bolts are 3/4" diameter x 5" long.
    view full answer...
  • Replacement Head for Husky Weight Distribution System
    While some components of a weight distribution system can typically be interchangeable between manufacturers, such as the adjustable shank, replacing the system's head with one of a different brand is not recommended. This is because the head is tested along with its spring bars, and changing out these parts can affect the system's overall rating and performance. Because of this, I do not recommend using the Replacement Pro Series Weight Distribution Head # PS58442 on your Husky system,...
    view full answer...
  • What Size Socket is Needed For Attaching Equal-i-zer Weight Distribution Head To Drop Shank?
    The Replacement Bolts # EQ90-02-9100 that hold the Head for Equal-i-zer Weight Distribution Systems # EQ90-02-1200 require a 1-1/8" socket. I have linked the installation instructions below for the Equal-i-zer Hitch System # EQ37140ET so you can see all the tools needed and what steps they are used.
    view full answer...
  • Extended Ball Mount For Towing an Enclosed Trailer Behind a Motorhome
    I have a couple options for you as the Curt High-Low Adapter 45797 # C27KR is only designed to be used with tow bars when flat towing. The Curt Class III Ball Mount with 2-5/16" Ball # C45065 is only 9-1/4" long from the receiver hitch pin hole to the ball mount hole. The Curt Ball Mount # D-28 also has a 6" drop like the other Curt ball mount but this mount is 14-1/4" long from the receiver pin to ball mount hole. That would gain you 5 inches without using an adapter. The ball mount...
    view full answer...
  • Replacement Hardware for Attaching Head of Equal-i-zer to Shank
    We have a set of replacement hardware for the heads of Equal-i-zer weight distribution systems with the part # EQ90-02-9100. The bolts are 3/4 inch in diameter and 5 inches long.
    view full answer...
  • Replacement Lever & Head Unit For 14k Equal-i-zer Weight Distribution Hitch
    Hi Cory, You can pick up the replacement snap-up lever right here for your Equal-i-zer Weight Distribution Hitch # EQ37140ET. For that, all you need is the following: - Replacement Snap-Up Lever for Equal-i-zer Weight Distribution Systems # EQ95-01-6050
    view full answer...
  • Should Spring Bars of Equalizer Get Replaced if Head is Worn Out
    Hey Dave, in general if the head of your Equalizer is worn out that doesn't mean the bars are as well but you'd want to go over them and be sure. The correct head replacement is the part # EQ90-02-1200 that you referenced. If you need new spring bars it would be part number # EQ90-01-1299 but it would be a good idea to replace the hardware with part # EQ90-02-9100.
    view full answer...
  • Weight Distribution System Compatibility Between Different Manufacturers
    The Husky Replacement Head for Husky Weight Distribution Systems - Round Bar # HT31516 will bolt onto the Reese Weight Dist Shank - 14" Long - 2-1/4" Drop to 7" Rise - 1,400 lbs TW # RP3214 or the Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW # EQ90-02-4500. Each shank has the weight rating to work appropriately and has the same incremental adjustment of 1-1/4 inches to work properly. The shank is really the only interchangable part on a weight distribution...
    view full answer...
  • Replacement Hardware for Weight Distribution System Head
    We have the Replacement Bolts for Equal-i-zer Weight Distribution Head # EQ90-02-9100 that are 3/4" diameter x 5" long bolts. These are the replacement you desire for your weight distribution head to mount to the weight distribution shank. The brand of weight distribution system doesn't matter for the hardware to function properly, so you can use this hardware on Curt, Reese, Blue Ox, and other brand systems as well.
    view full answer...
  • Towing a 4,500lb Jayco Travel Trailer With a 2012 Buick Enclave and 2013 Toyota Highlaner
    I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 for your 2012 Buick Enclave. This will install without any drilling or trimming of panels, but the door panel on the rear of the Buick will need to be removed and not reused. The Hopkins Plug-In Simple Vehicle Wiring Harness # HM11141615 will give you a 4-way flat trailer connection. The Universal Installation Kit for Trailer Brake Controller # ETBC7 will provide you with the other wiring and parts necessary for installing...
    view full answer...
  • Can a 10K Fastway e2 Round Bar Be Converted to 12K Equal-i-zer Weight Distribution System?
    I recommend getting a whole new 12K Equal-i-zer Weight Distribution System # EQ37120ET to replace your Fastway e2 Weight Distribution # FA94-00-1061. While it is possible to get the new Head # EQ90-02-1200, Ball # EQ91-00-6120, Hardware # EQ90-02-9100 and Spring Bars # EQ90-01-1299 you could run into warranty issues since the hitch was technically not acquired as a single unit. And with the Lifetime warranty that would not be something to just brush off. Since your unloaded tongue weight...
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Dan D
Updated by:
Dan D
Employee Laura H
Updated by:
Laura H
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Jameson C
Expert Research:
Jameson C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.