Customers compare LC324269 to these similar products
Products Featured in this Video
Hello, everybody, this is Jeff from etrailer.com. Today we're going to take a look at this Replacement Foot Pad for the Lippert Components Hydraulic Ground Control Leveling System, and it is for a quantity of one foot pad. This will replace the foot pad on your Lippert Components Hydraulic Ground Control Leveling System. It does include everything shown here on the table. The foot pad, it comes… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1 #LC324269 needs to be torqued to 132 ft-lb and Lippert recommends using some Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube…
view full answer...I suggest using a strap wrench to hold the cylinder side while tightening the installation hardware on the Replacement Foot Pad, #LC324269.
view full answer...Josh, the bolt for the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 is 7/16" x 1/2" and needs to be torqued to 132 ft.-lbs.
view full answer...Hey TJ, I went out and opened up one of the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 boxes and found that they include a 5/8-18 x 1-1/2" fine thread grade five bolt. I then called Lippert and they…
view full answer...Hey Perry, thanks for reaching out! The part you're looking for is 123932, but that O-Ring is unfortunately not available on it's own anymore. Lippert has it available still in their Replacement Footpad Kit #LC86UD, but I recommend taking…
view full answer...The exact replacement foot plate for the Level Up system you have is not available as a replacement. But you could use #LC314667. The issue is that it uses a smaller bolt than the Level Up foot. So you would have to use a 1/2 inch bolt that will…
view full answer...Thanks for the picture! I took a look at what we got for your 2018 Thor Palazzo Motorhome, and it appears you need the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269. This replacement will replace the foot pad for…
view full answer...It sounds like you are needing the Screen With Frame #BVC0573-31R. We often don't include measurements for parts like this as they are specific to a particular fan and with all the fans fitting the 14"x14" roof opening the parts are all…
view full answer...I would have to know exactly what jacks you have on your 2023 Jayco Greyhawk to determine if the Replacement Foot Pad #LC324269 will fit. This is specifically for the Lippert Hydraulic Ground Control Leveling System.
view full answer...If the Lippert leveling system on your 2016 Thor Hurricane 35C is the hydraulic Ground Control system then yes, the Replacement Foot Pad #LC324269 is what you need and the SnapPad #SP54FR for a 9" round jack foot will fit it. Attached are some…
view full answer...You'll have to hold the leg of your jack still so that you can unscrew the bottom of the foot pad to replace it. If you have a large set of channel locks you could do this pretty easily with them. The trick will be hold it tight enough to keep it…
view full answer...Hey Mark, we do have a replacement foot pad for your Lippert Level Up system with the part #LC324269.
view full answer...