Will Lippert LC159041 Spare Tire Carrier Fit on a 2022 Rockwood Mini Lite 2509s

Question

Question:

I have a 2022 mini lite 2509s. I would like to mount the spare under the tongue or under the body. Will this carrier fit and leave enough clearance?

asked by: Joe D

0

Expert Reply:

The Lippert # LC159041 isn't a RV-specific product. Lippert doesn't provide us a list of which RV's it fits or doesn't fit. However, there is a way you can determine if it'll work for you. The carrier has an overall width of 71 inches, so if the frame members of your travel trailer are 71 inches apart, measured outside to outside, the # LC159041 would work just fine for you. This carrier is designed to attach to the frame members under the rear of the travel trailer, not at the trailer tongue.

You can use a wrench to operate the winch on the carrier, but a crank handle is available separately as part # LC285324.

expert reply by: Mike L

0

Answer 1

The outside width of the Lippert RV Spare Tire Carrier part #LC159041 measured where the mounting flanges are is 21-1/8 inches.

view full answer...

Answer 2

Hi Jeff! I know the part you are looking for. It was called the Lippert Spare Tire Winch, and unfortunately, they did discontinue it earlier this year. You may be able to find someone that still has stock, but I can't say where exactly that would…

view full answer...

Answer 3

Looking at the BAL Retract-A-Spare it has a much different design than the Lippert Spare Tire Winch #LC159056 you found. You may be able to mount the new winch so it will still work on your trailer but as we do not have both the products here with…

view full answer...

Answer 4

There is no way to lock the Lippert RV Spare Tire Carrier with Winch #LC159041 as it ships from the factory. You would need to weld on a tab which would allow you to use a Pin #37201211 by drilling a hole through the tab and shaft for the winch. We…

view full answer...

Answer 5

I checked with Lippert and they sent me the attached dimensional diagram for the Lippert Components RV Spare Tire Carrier with Winch #LC159041 that you referenced. It hangs up to 46 inches from the surface it attaches to.

view full answer...

Answer 6

There aren't any instructions for just the Lippert Components Spare Tire Winch with Offset Cable #LC159056 at all, but you will need to find a way to bolt it onto the underside of your RV frame; the mounting holes are 5-1/4" apart on center…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Will Lippert LC159041 Spare Tire Carrier Fit on a 2022 Rockwood Mini Lite 2509s

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching