Product Experts Available Now!
Call 1-800-940-8924
Backing Plate for RR06 Recessed Swivel D-Ring Tie Down
(29 reviews)
Price: $7.43
Need help with installation?
Locate installers near me- All Info
- Reviews (29)
- Q & A (0)
- Videos (1)
- Photos
Brophy Accessories and Parts - BP06
- Trailer Tie Down Anchors
- D-Ring Backing Plates
- Brophy
Tie-down reinforcement plate for recessed swivel trailer tie-downs. The plate is is placed under the surface of the tie-down location to offer greater support than just the wood.
Features:
- Adds extra support to tie-down
Specs:
- Weighs 0.74 lbs
- Designed for RR06
BP06 C.R. Brophy Machine Works Backing Plate
Video of Backing Plate for RR06 Recessed Swivel D-Ring Tie Down
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for What to Know About the Backing Plate for RR06 Recessed Swivel D-Ring Tie Down
Today we're going to be taking a look at part number BP06. This is the Brophy Backing Plate for recessed swivel D-ring tie-down. This backing plate is going to fit part number RR06 perfectly. That D-ring is going to be sold separately. This is made from a steel construction. This is going to add support to the tie-down. The plate would be placed under the surface of the tie-down location to offer greater support than just the wood or just the surface that you're mounting it to.
Again, it's just designed to add that extra support needed. Very light-weight. It only weighs about .74 pounds and, again, it is designed for part number RR06, which is sold separately and it can be found right here on our website. We're going to go over some measurements of the backing plate real quick. It's a square design, so it's going to give us a measurement of 6 1/2 inches by 6 1/2 inches. The diameter of the hole here in the middle is going to be about 4 and 5/8ths of an inch.
The mount hole separation, measuring center on center, the distance between the mount holes looks like it's 3 and 3/4 of an inch. Again, square design, so that's going to be the same between all of the holes. The diameter of those mount holes looks to be about 3/8ths of an inch. That's going to do it for our review of part number BP06. This is the Brophy Backing Plate for recessed swivel D-ring, part number RR06. .
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Did not arrive in time
Ratings & Reviews
4.8
29 reviews
by:
Dwayne C.
10/18/2016
Brophy swiveling D ring tie downs are pretty awesome. Super heavy duty, really like the Swivel design. By having the freedom of movment the ancor is never in a bind, at any angle and tension is pulled evenly from any direstion. The matching backing plates are a must as far as I'm concerned. Installation was easy. All holes on the backing plates ligned up well. No issues. 4 1/2" hole saw is perfect for the D ring tiedowns just a little helpful info. I will give it up to etrailer.com also for the fast shipping. It means alot when you have a project going on. Over all satisfied with my purchase.
by:
Tim
10/28/2025
Nice backing plates for my application! Another fine purchase from you guys. Always shipped fast & the best price. I will be buying from you guys again!!!!
by:
Bruce
10/06/2025
The backing plates worked as designed and a great fit.
by:
Thomas
11/26/2024
It's exactly what I needed for the swivel tie downs ,I had to order a 5"hole saw from HD. If e trailer could put a link to 5" hole saw that would save a lot of research. Thank you
by:
Fred
02/03/2024
The backing plates arrived on time and exactly as described. I’ve yet to permanently install them but a dry fit shwes no problems.
by:
Cody
02/09/2024
Good pricing, fast shipping, great customer service. You can feel the quality of the product unlike other suppliers.
by:
Chris
05/20/2016
worked great , could not get local so found them here at a great price and fast shipping !
by:
Drew
10/08/2021
The tie downs have worked well; these were installed on the backside of all of them
by:
James
08/12/2018
Purchased these to go with the d ring anchors. Again Molly helped me find exactly what I was looking for. I chose to purchase my own hardware because I wanted to use stainless carriage bolts
by:
Rick C.
10/25/2013
Received product promptly, fits the tie down great.
by:
Charles B
02/04/2013
I do not have the items installed as of yet, but received them on time and were in excellent shape. Should work nicely on my trailer.
Will be using etrailer.com again. Thanks!
Will be using etrailer.com again. Thanks!
by:
Jeeper
07/04/2016
Back plate fit tie down great - holes lined up, but they were too thin for my application.
by:
David
04/24/2024
There’s not much to say about it, but it worked
by:
Josh J
08/06/2015
Fits well and the plating looks nice. Material is about 1/8" thick and seem sufficient for the job
by:
Ron
09/26/2026
by:
Texas23
12/19/2014
Thanks for the fast service...great quality!
by:
David
06/21/2023
Exactly what I needed
by:
James gallagher
06/17/2017
Everything that I order was great.
by:
Dr joe
04/14/2017
Very sturdy and nice looking.holes match up fine with the floor rings
by:
James gallagher
06/17/2017
Everything that I order was great
by:
Milt Wade
05/01/2015
They look good.
by:
Scott
02/16/2025
by:
Levi
08/30/2024
by:
Bruce
09/19/2022
by:
Frank
11/23/2022
25
29
true
Show More Reviews
See what our Experts say about this Brophy Accessories and Parts
- What are the Dimensions of the Brophy D-Ring Tie Down RR06I pulled the Brophy Trailer D-Ring Tie Down, # RR06, from my warehouse to measure and verified that the diameter of the flange is in fact 6-5/16 inches. I also verified that all other measurements on the product page are correct. I have attached the photo of the dimensions for you to reference. We recommend using the backing plate, # BP06, with this tie-down to provide extra support when securing cargo.
view full answer...
- How to Determine Proper D-Ring Spacing In an Enclosed Car Hauler TrailerSince you are planning on installing these Trailer D-Rings # RR06 in a plywood floor I would recommend you also get the Backing Plate # BP06 to offer better support than just the wood of your trailer floor. As far as the placement of them in your trailer, you will need to consider what vehicles you will be transporting. If it will be only one vehicle I would recommend loading that car in the trailer and then strategically place the D-rings to give you the best possible mounting points...
view full answer... - How to Install the Trailer D-Ring Tie Down # RR06 on a TrailerIf you look below the specs for the Trailer D-Ring Tie Down, # RR06, you will see that the lip is wider than the base . You would need to drill a hole that is 4-3/8 inches in diameter for the base to fit through and then use screws appropriate for the surface it is mounted to in order to secure it. It is recommended to use the backing plate # BP06 under the service where the D-Ring is installed to maximize its capacity and offer support. In order to drill out the hole you can use a large...
view full answer... - How to Mount the D-Ring to a MC10 Motorcycle Trailer for Strapping in a Honda GoldwingYou would need to drill a hole that is 4-3/8 inches in diameter for the base to fit through and then use nuts and bolts appropriate for the surface it is mounted to in order to secure it. It is recommended to use the backing plate # BP06 under the surface where the D-Ring is installed to maximize its capacity and offer support. In order to drill out the hole you can use a large enough hole saw drill bit or use the backing plate as a template and a pencil to mark the diameter needed and...
view full answer... - What Size Mounting Hardware is Required to Install the Trailer D-Ring Tie Down, # RR06The Trailer D-Ring Tie Down, # RR06, has mounting holes that are 1/4 inches in diameter. We recommend using backing plate # BP06 when installing this tie down to provide support for the tire down.
view full answer... - Depth Needed To Mount Trailer D-RingI pulled a trailer D-Ring from our warehouse and took a measurement for you. the depth of the D-Ring housing from the bottom of the flange with the mounting holes is 7/8 inches. The 1/4 inch mounting holes are spaced 3-3/16 inches apart. The mounting plate you would use under the surface you are mounting the D-Ring to, is part # BP06. This would offer much more support than just wood.
view full answer... - Can the Brophy Swiveling D-Ring Tie Downs Be Used To Secure a 5,000 Lb Vehicle with Backing PlateThe Brophy Swiveling D-Ring Tie Down Anchor part # RR06 with the Backing Plate for RR06 Recessed Swivel D-Ring Tie Down part # BP06 are a great, easy to install set of tie-downs which can be used for securing a vehicle. The tie-downs themselves have a 2,000 lb working load limit. That said, you will be limited by the attachment point if lower. It would be very difficult for me to give a definitive answer of the weight capacity limits of your floor so for this I must recommend you reach...
view full answer... - Parts Needed to Mount the Swiveling D-Ring on a Steel Deck TrailerAs long at you have the appropriate size bolts and hardware for the D-Ring Tie Down Anchor # RR06 you will not need the backing plate. The backing plate # BP06 wouldn't offer your D-ring anymore support than the steel frame itself would, but it could come in handy as a nice template for drilling the holes in your equipment trailer.
view full answer... - Dimensions of the Brophy # BP06 Backing PlateI went out into our warehouse and measured the Backing Plate # BP06 and found that the outside dimensions are 6-7/16 inches by 6-1/2 inches. The circle in the middle has a 4-5/8 inch diameter and the overall thickness of the metal plate is .11 inches The bolt holes have a distance of 3.80 inches apart with a diagonal measurement of 5.40 inches. See picture.
view full answer...
- Are Backing Plates Alone Sold For Brophy Swiveling D-RingsYes, for the Brophy Swiveling D-Ring Tie Down Anchor # RR06 there are backing plates available by themselves, with the correct part being the following: - Backing Plate for RR06 Recessed Swivel D-Ring Tie Down # BP06
view full answer... - Hardware for Brophy Swivel D Rings Part # RR06Installation hardware is not included with the Swivel D Ring part # RR06 due to the unknown nature of the surface that the end user will attach it to. Depending on the weight of the object that will be held down, and the thickness of the surface it will be attached to, you also might want to consider the backing plate part # BP06.
view full answer... - Availability of CR Brophy D-Ring Tie-Down Without Countersunk HolesWas it the holes themselves you weren't wanting, or the fact that they're countersunk that you don't care for? Brophy doesn't make a similar tie-down anchor without holes, but they do offer some with holes that aren't countersunk like part # RR05 with a 5K max load, or 1600 lb safe working load limit. There's also the # RR06 with a 6K max, 2000 lb safe working load limit. For a more secure installation, there's backing plates available, if you went with the # RR05, you'd use the # BP05...
view full answer... - Backing Plate Availability for the Brophy D-Ring Anchor RR06For the backing plate of the Tie Down Anchor part # RR06 you would want the part # BP06.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Michael B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.