Product Experts Available Now!
Call 1-800-940-8924
Backing Plate for Brophy D-Ring Tie Down Anchor - Black Powder Coat - Qty 1
(14 reviews)
Price: $24.66
In Stock
Brophy
Backing Plate for Brophy D-Ring Tie Down Anchor - Black Powder Coat - Qty 1
Part Number: BP1D
In Stock
$24.66
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (14)
- Q & A (0)
- Videos (1)
- Photos
Brophy Accessories and Parts - BP1D
- Trailer Tie Down Anchors
- D-Ring Backing Plates
- Brophy
Backing plate lets you install your Brophy bolt-on D-ring tie-down anchor (DR01 - sold separately). Powder coated steel construction resists corrosion.
Features:
- Backing plate provides mounting point for your Brophy D-ring tie-down anchor (DR01 - sold separately)
- D-ring bolts onto plate
- Black powder coated steel resists corrosion
- Made in the USA
Specs:
- Safe working load limit (WLL): 2,000 lbs
- Maximum load (break strength): 6,000 lbs
- Quantity: 1 backing plate
- 1-Year limited warranty
BP1D C. R. Brophy Mounting Plate for Brophy D-Ring Bolt - Black Powder Coated Steel - Qty 1
Video of Backing Plate for Brophy D-Ring Tie Down Anchor - Black Powder Coat - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Hands-On with the Backing Plate for Brophy D-Ring Tie Down Anchor
Today, we're taking a look at the backing plate for the Brophy D-Ring Tie Down Anchor. The backing plate provides the mounting point for your Brophy D-Ring Tie Down Anchor, part number DR01, which is this component here. The D-Ring bolts onto the plate here at the welded on nut. The unit is made from a durable steel construction. It features a nice black powder-coated finish to resist rust and corrosion. It's made in the USA, has a safe working load limit same as the anchor, which is 2,000 pounds with a maximum load or break strength of 6,000 pounds.
The backing plate measures, edge to edge in this direction, six inches by five inches, and that is a quarter inch thick steel. You'll also see there that we have the pre-drilled holes, one on each corner, so if you want to mount this to the underside of a deck board or anything like that on your trailer, then you can easily do that. That's going to do it for today's look at the backing plate for Brophy D-Ring Tie Down Anchor.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.8
14 reviews
by:
Van
06/24/2024
I have mounted multiples of these in my garage of my Toy Hauler. Depending on which Toy I take on my trip I move my screw in tie down rings to the optimal tie down plate location. I appreciate being able to purchase the plate separately so I can have the optional locations.
by:
Irving
02/25/2020
I bought two BP1D mounting plates for the Brophy tie-down anchors. My 6’ x 10’ utility trailer will be used to haul a motorcycle or lawn tractor and I need to place rear tie-downs in different locations to secure the rear. The setup for the motorcycle is especially tricky and are located towards the front of the trailer. A second location for other equipment are set in the back. These Brophy anchors are ideal as the mounting plates are under the trailer deck. The heavy duty eyelets that come with DR1S (purchased separately) are out of the way and threaded into the mounting plate when ready to strap equipment in place. I really am happy with the cost effective way to have multiple tie-down locations
by:
Albert
02/27/2024
I ordered several of these plates. All were well finished and heavy duty. The weld on the nut is inconsistent: some had a long well shaped fillet, others much dhorter.
by:
Keith
10/09/2021
Works great. Only need to remove one bolt to remove my motorcycle chock now.
by:
Dan
01/31/2021
Dan B.
1/31/2022
Great no issues
by:
David
07/10/2023
Works awesome
by:
Tim
07/09/2023
The tech assistance I got was excellent and the delivery was equal to Amazon. Thank you.
by:
Wayne
05/05/2024
A good quality product!!
by:
Dan
06/07/2024
Ordering is quick and easy, Quick deliveries
by:
Kim
01/27/2023
by:
Dan
07/08/2021
by:
Jeremy
03/05/2024
by:
Ron
02/19/2021
by:
Brian
08/11/2023
14
14
true
See what our Experts say about this Brophy Accessories and Parts
- Bolt Thread Size for Brophy D-Ring Tie Down Anchor # DR01 The Brophy D-Ring Tie Down Anchor # DR01 features a 5/8 x 3 inch coarse thread bolt. It is designed for use with the Backing Plate # BP1D so it is not available with a different bolt thread. I have attached a couple short video reviews on this product that you can check out as well.
view full answer... - Can The Brophy D-Ring Tie Down Anchor Be Attached Directly To The Trailers Frame?Yes, if you are mounting the Brophy D-Ring Tie Down Anchor # DR01 to the frame of your trailer you will not need to use the Backing Plate # BP1D. The Backing Plate # BP1D is designed to provide a stable base when mounting to wood decking by having a large surface area to distribute the weight across the board.
view full answer... - Size of Bolt to Use with Backing Plate for Brophy D-Ring Tie Down AnchorThe holes of the backing plate part # BP1D are round so you wouldn't actually use a carriage bolt. Instead you'd use a standard nut and bolt. 5/8 inch diameter would work great.
view full answer... - Can Brophy D-Ring Tie Down Anchor Fit T-Slot on TrailerThe bolt on the Brophy D-Ring Tie Down Anchor # DR01 measures 3" long x 5/8" diameter. The best way to mount it is with the Backing Plate # BP1D. There is not a specific T-nut available to mount this in the channel on your trailer. Tracks/channels like what you have typically have parts that are brand specific. If you can find out what kind of channel that is there may be a different tie down available. Even if you found one that would work with the 5/8" bolt, more than likely the 3"...
view full answer... - Will The Brophy D-Ring DR01 Work With Torklift FastGun Turnbuckles?Yes, the Brophy D-Ring Tie Down Anchors # DR01 will work with the Torklift FastGun Turnbuckles # TLS9529-2-LK. Generally, these kinds of D-Rings are not used as a tie down point for a camper, but if they are properly secured using the Backing Plate # BP1D, I see no reason why these could not be used for this purpose. I am not sure exactly what kind of camper you are securing but having four 2,000 lb capacity D-rings should be more than enough for most any truck camper.
view full answer... - D-Ring Size For Bulldog Winch Ratcheting Wheel Tie-Down StrapI recommend using 1/4" or 1/2" D-rings with the Bulldog Winch Ratcheting Wheel Tie-Down Strap for Oversize Spare Tire - Horizontal Mount - 2,000 lbs # BDW20363. You can use the Brophy Swiveling D-Ring Anchor w Backing Plate and Hardware - Bolt-On - Recessed Mount - 2,000 lbs # RR6K or Brophy D-Ring Tie Down Anchor - Bolt On - 1/2" Diameter - 2,000 lbs # DR01 with Backing Plate # BP1D.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Written by:
Kristina F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Van
6/24/2025
.....one year in - still working excellent for me....added some to a second trailer as well