When your tires need air away from the shop, this 12V onboard compressor keeps a 3-gallon tank on the vehicle. With 3.4 cfm and a 120 psi maximum, it puts mobile air within reach wherever your truck goes.
A low tire away from shop air can turn into a search for a working compressor. This onboard setup combines a 12V DC compressor with a 3-gallon tank and runs from your vehicle's electrical system, keeping a stored air source on the vehicle for routine tire inflation. Add an air hose (not included), connect at the tire, and handle pressure checks wherever your truck is parked.
Pressure and airflow both matter when you're deciding if an onboard compressor fits your inflation needs. This unit is rated for 120 psi and 3.4 cfm, with a 3/4-horsepower running motor and 1-horsepower peak rating. Those numbers give you concrete capacity to compare with the pressure and airflow requirements of your tires or other planned air tasks instead of judging the compressor by tank size alone.
This isn't a portable plug-in inflator that you connect only when a tire needs air. The compressor runs on 12V DC and must be installed with an inline 50-amp circuit breaker or fusible link. Accounting for that circuit protection and the route from your vehicle's electrical system is an important part of planning the onboard installation.
Permanent onboard air works best when the compressor, electrical routing, and hose reach are planned together. The assembly measures 21-1/2" long x 8" wide x 18-1/2" tall, giving you the dimensions needed to check your intended mounting space before installation. An air hose isn't included, so choose a hose with enough reach for the tires and air connections you plan to service from that mounting location.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steve here with etrailer. Thanks for joining me while we check out this Phoenix USA 12 volt air compressor with a built-in three gallon tank. Now folks, this has been designed for mobile and onboard air applications. This unit runs on 12 volts of DC power and it features a three quarter horsepower motor, making it a great option for service trucks, off-road rigs, trailers, you name it. If you have a utility set up where you need onboard air, this is a nice option for you. You have an onboard, again, three gallon tank and up to 120 PSI.
It's gonna give you enough stored air for inflating tires, running light duty air tools, handling some roadside service tasks, and you won't need to be going to or need a full shop size compressor. Now I did wanna point this out. I left this tag here, it was wire up with the wires, and basically it's giving you a warning. It says compressor must be used with an inline 50 amp circuit breaker or fusible link. So make sure you're following instructions.
You definitely don't wanna break anything on your vehicle or ruin the motor on the tank and those kind of things as well. Now, one of the standout features that I like, one, you have a handle, it's pretty lightweight, it's not too bad, and this is compact. So it features the size of it, rather it's gonna be toolbox friendly. So this has been designed to actually sit down inside of a standard truck toolbox, making it perfect for clean installs. You got the gauge here, you got the on off switch and then the air out right over there as well.
Now this can deliver around 1.7 CFMs at 90 PSI, and that's gonna be ideal, again, for inflating small pneumatic tasks, tires, whatnot. And this is an oil free design, so that means less maintenance and no mess over time. Now I do wanna go ahead and power this up. So let me grab my little jumper box here that I got today. Now obviously this is not included.
And we're gonna run 12 volts of power to this, so we can turn it on so you can hear it. All right, so I got my 12 volt power wired up. Turn the switch on here. (air compressor rumbling) Excuse me. So you can hear it pumping. I'll try to get a little closer, so you can kind of hear just how quiet it is. And then with it on, I can actually turn this valve here to let some air out so you can hear that too. (air compressor hissing) So you can kinda hear the tank pressurize and whatnot. So again, not too loud, it's actually pretty quiet for the size of it and everything. Let me get this outta the way here. And again, I did just turn it on for a little bit. I opened the valve, I closed it, I'm opened again so you can hear the air that's built up just in those 30 seconds. (air compressor hissing) So again, folks, this is the Phoenix USA 12 volt air compressor with included three gallon tank. I'm Steve with etrailer, as well as reach out if you have any further questions about this or any other products. And to wrap it up, I do wanna give you some quick overall dimensions. I'm sitting roughly at 21 1/2 inches long overall or wide depending on what you're looking at there. And then as far as a height from the ground to the top of my compressor, about 18 1/2 inches tall. And let's get a width. The base here with the legs spread out is the widest point and we're gonna call that eight inches wide. So again, folks, those measurements to help show you it's gonna fit with where you need it to fit. I'm Steven, thanks for watching and have a great day.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.