Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K
(13 reviews)
Price: $139.56
Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K
Our Price: $139.56
This item qualifies for Free Shipping
Need help with installation?
Locate installers near meCustomers prefer these similar products
10% prefer this
$79.36
- All Info
- Reviews (13)
- Q & A (0)
- Photos
- Why etrailer?
Demco A-Frame Trailer Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 21000 lbs GTW
- Standard Coupler
- Demco
- Auto Latch
A-frame coupler is made of sturdy steel and has a durable zinc finish with a 200-hour salt spray rating. eZ-Latch ensures fast, easy, secure hookup and disconnect. Includes cutout for your 2-1/4" round jack. Bolt-on installation.
Features:
- A-frame coupler lets you hook up your trailer to your tow vehicle
- Provides connection point for hitch ball
- eZ-Latch mechanism with corrosion-proof composite latch handle ensures simple, secure hookup and disconnect
- Lets you hook up when latch is in closed position - just drop coupler over hitch ball and latch will snap into place
- Heavy-duty steel construction
- Durable zinc plating offers corrosion resistance
- 200-Hour salt spray rating
- Bolt-on installation
- Cutout in top plate fits jacks with 2-1/4" diameter outer tubes
- Made in the USA
Specs:
- Application: 50-degree A-frame trailers
- Ball size: 2-5/16"
- Weight capacity: 21,000 lbs
- Overall length: 17-5/8"
- Diameter of lock pin hole: 5/16"
- Minimum span needed for pin lock: 3"
- 1-Year warranty
eZ-Latch Coupler
This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the contoured handle and the coupler socket will automatically release its grip on the ball.
Sturdy, Corrosion-Resistant Construction
Made of sturdy steel, this coupler features a durable zinc coating that has a 200-hour salt spray rating, which is designed to limit rust and corrosion. The eZ-Latch's sleek, ergonomically designed handle is constructed of a durable composite material that's corrosion-proof, allowing it to withstand whatever the road and the elements dish out.
16680-95 Demco A-Frame Trailer Coupler with Easy Latch and Jack Hole - Zinc - 2-5/16" Ball - 21,000 lbs
Replaces Demco 13205-95
Item # DM13205-95
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Alternate product found
- Defective
- Did not fit
Customer Reviews
Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K - DM13205-95
Average Customer Rating: 4.6 out of 5 stars (13 Customer Reviews)
A-frame coupler is made of sturdy steel and has a durable zinc finish with a 200-hour salt spray rating. eZ-Latch ensures fast, easy, secure hookup and disconnect. Includes cutout for your 2-1/4" round jack. Bolt-on installation.by: Jason03/30/2022
the eZ-latch gets stuck all the time, never had a latch do that before. Would not buy another one
Comments
You mentioned that the EZ latch has been stuck and so I reached out to the manufacturer. There are a few questions that they wanted to ask. Is it stuck in the closed position? Have you coupled to the coupler when the handle was open? It is possible that the stem inside the coupler is bent which would cause this issue.
-- 
Jenny N - 04/07/2022Thank you for this. Answers are:Gets stuck in the closed position when its coupled to ball hitch 90 percent of the time I have coupled when handle was open It is possible the stem is bent… not sure how to tell
-- comment by: Jason - 04/07/2022The stem is going to be hard to get to as it is under the handle. When coupling with this coupler you would want to make sure that the handle is always in the closed position when coupling. When it is in the open position it can bend the stem which would cause the handle to become potentially stuck. You could repair it by using the latch repair kit part # DM6008
Demco Composite eZ-Latch Repair Kit for 2-5/16" Ball Couplers
$48.93.
-- Demco Composite eZ-Latch Repair Kit for 2-5/16" Ball Couplers
$48.93.
Jenny N - 04/07/2022by: Gregory 12/21/2022
Great Product Thx Greg
by: Scott 01/28/2021
We installed this on a customer's trailer. Everything is great and they're still using it. What we did not like about the product is the plastic lift handle. We prefer a more durable handle as this was installed on a trailer to be used around a farm.
by: Earlwayne08/07/2021
Well constructed product that easily fit to update an older trailer. Very good buy
by: John S.12/22/2016
Very heavy duty piece 5/16 steel. I have not installed yet, dis like the fact that it come with a plastic handle as well as no instructions or recommendation as to what hardware they recommend. A little disappointing but when in doubt grd 10.9
by: Brandon 08/21/2021
Well built. Simple coupling design.
by: Pete kinsler02/02/2017
Very nice coupler easy to operate glad I went with that one
by: Bob11/14/2017
Working Great
by: Desiderio10/11/2022
by: Burke10/04/2022
by: Clay10/21/2016
Looks to be good quilty
by: Kevin 08/28/2021
12
12
See what our Experts say about this Demco A-Frame Trailer Coupler
- Bolt Size to Install Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-LatchThe bolts required to install the Demco 50-Degree A Frame Trailer Coupler # DM13205-95 are 3/8" diameter x 1-3/4" long Grade 5 bolts. I spoke with the manufacturer and they confirmed that you won't want to use Grade 8 bolts on this install since they won't provide enough flex and may end up shearing through the coupler frame or breaking off completely.
view full answer... - Installation of Demco A-Frame Trailer CouplerIn order to install the Demco A-Frame Trailer Coupler # DM13205-95 you'll need to remove the current one on your Primetime Avenger. This is a bolt-on coupler so the welding won't be necessary.
view full answer... - 2-5/16 inch Ball Coupler that Can be Disconnected When Under TensionThe Demco EZ latch couplers like the part # DM13205-95 have a mechanism that will release when under tension like you are wanting and will allow the trailer to be jacked up and off the ball as well. This would be a great option.
view full answer... - Demco Bolt on A-Frame Coupler to Replace Welded On CouplerYes, so long as you have a standard a-frame trailer you will be able to replace your current welded on coupler with the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K item # DM13205-95. I have attached a photo with detailed dimensions for a standard 50-degree A-Frame coupler so you can confirm compatibility with your trailer. To install the Demco A-Frame Trailer Coupler item # DM13205-95 that you referenced, you will want to use 3/8 inch, grade...
view full answer...
- EZ Latch Trailer Coupler For 50 Degree A Frame TrailerIt seems like you're looking for an eZ latch coupler like this one # DM13205-95. It has a 2-5/16" ball size and has the square end on it like you're describing. The front latch is simple to lock into place and is square. If you have a 50 degree A-Frame Trailer. If you have a different A-Frame Trailer we have more on our site! Check our the video to get a closer look!
view full answer... - What Size Hardware Should be Used When Installing Demco 50-Degree A Frame Trailer CouplerThe bolts required to install the Demco 50-Degree A Frame Trailer Coupler # DM13205-95 are 3/8" diameter x 1-3/4" long Grade 5. Grade 8 is not recommended as they don't flex enough and could sheer off.
view full answer... - Demco Bolt on A-Frame Coupler to Replace Broken Welded On CouplerThe Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item # DM13205-95 that you referenced will fit a standard a-frame trailer. This is a bolt on coupler so you won't have to borrow a welder. To install you will want to use 3/8 inch, grade 5 bolts , approximately 1-1/2 inches long. You will want to use 5 of these bolts per side for a total of 10 bolts. I have attached a detailed diagram of this coupler so you can confirm it fits your trailer before you purchase.
view full answer... - Demco Coupler Dimensions For 50-Degree A-Frame Trailer For Fabricated FrameThanks for that photo, I do appreciate it. And all of the couplers we have - and indeed all the ones I am aware of - require a frame that is fully engaged. While Demco was not able to provide a dimensional drawing, we did measure the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95. As you can see it is 17-5/8" long in total, and 8-5/8" behind where the actual coupler portion is. And while it's added work, you may need to weld on plates, or even a 3" channel to the front and use a...
view full answer...
- Can Demco 50-Degree A-Frame Trailer Coupler be Used on Horse TrailerYou can absolutely use the Demco 50-Degree A-Frame Trailer Coupler with Jack Hole - eZ-Latch # DM13205-95 with a horse trailer. Couplers aren't specific to any kind of trailer, so as long as it has the specs you need, it will work for sure. This coupler will fii A-frame trailers, couples to a 2-5/16" hitch ball and has a 21,000 lb capacity. It can also use a pin lock, the Master Lock Adjustable Trailer Coupler Lock # 2847DAT. I have added links to video reviews for you to check out of...
view full answer... - Why Doesn't Demco Coupler Have Safety Chain LoopsThere aren't any safety chain loops on the Demco coupler part # DM13205-95 that you referenced because you want to attach the chains to the trailer frame and not to the coupler itself incase for some reason the coupler was to come off at the welds. For safety chain loops that you could weld to your trailer frame we have the part # E950.
view full answer... - Can You Replace Stock Coupler On A 2023 ATC Raven Car Hauler With Demco Coupler # DM13205-95Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for you. When installing the Demco 50-Degree A-Frame Trailer Coupler # DM13205-95, you will want to use 3/8 inch grade 5 bolts, that are approximately 1-1/2 inches long. Ten bolts will be needed five bolts on each side. For extra security I also...
view full answer...
- Solution for Repair Kit for A-Frame Coupler Latch on 1969 AirstreamI do have a solution, but those repair kits are designed for an Atwood coupler and have been discontinued. Atwood couplers are no longer made so neither are the parts. The best solution is to replace the coupler with a new one. For a weld-on option you could use the # CA-5400-B or for a bolt-on the # DM13205-95. I have attached some review videos along with a link to all of our A-frame 2-5/16 couplers for your reference.
view full answer... - Recommended 2-5/16 Coupler To Replace 2 Coupler On 2019 Winnebago Minnie 170K Travel TrailerI found a few pictures of the coupler on your 2019 Winnebago Minnie 170k Travel Trailer and you currently have an A-frame coupler. The most likely replacement option is the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole # DM13205-95 which is for trailer frames that have the standard 50 degree frame and requires a 2-5/16" hitch ball. The 50 degree A-Frame is the standard but it wouldn't hurt to confirm that the 50-Degree A-Frame is in fact what your trailer uses. The Demco # DM13205-95...
view full answer... - Recommended High-Capacity Silver-Painted or Zinc Plated A-Frame Trailer CouplerIt sounds like you're looking for a replacement a-frame coupler like # CA-5280-RB but in a silver-painted or zinc-plated finish. Please click on the link provided to see all bolt-on standard a-frame couplers for 2-5/16-inch balls. For the highest-rated designs Demco part # DM16680-52 is a 21K-rated bolt-on coupler with a silver powder-coat finish and part # DM13205-95 has a zinc finish. Both fit jacks with a 2-1/4-inch diameter outer tube and have a standard 3-1/4-inch mounting hole spacing....
view full answer...
- How to Convert Hydraulic Drum Brakes to Electric Over Hydraulic EOHIn order to convert the hydraulic drum brakes you have on your trailer to electric over hydraulic (EOH) you will need a electric over hydraulic actuator, breakaway kit, brake controller, trailer wiring harness, and trailer coupler. We do have all of these components for you but not in an all inclusive kit. For the electric over hydraulic actuator, breakaway kit, and trailer wiring I recommend the HydraStar Marine Electric Over Hydraulic Actuator part # HS381-9065. This kit contain the...
view full answer... - Availability of A-Frame Coupler Latch Repair KitIf you're referring to the Fulton # F44314R0303 you looked at then you can use the Repair Kit for Fulton A-Frame Coupler # F640801. If you have the Buyers Products # 3370091595, a replacement latch is not available which means you would need to replace the coupler. If you do need to replace the coupler, I recommend the Demco # DM13205-95 instead. This has the eZ-Latch which is similar to the Auto-Latch the Buyers Products coupler has. However, this coupler has a repair kit # DM6008 should...
view full answer... - Can My 2016 Ford F-150 Factory Brake Controller Actuate HydraStar Electric Over Hydraulic BrakesI spoke to HydraStar and the brake controller in your 2016 Ford F-150 will power their actuators perfectly fine, and without the need of any add-ons, like the Electric Over Hydraulic Actuator Adapter Module # HBA-CAM. The HydraStar Electric Over Hydraulic Actuator Kit for Disc Brakes # HBA16-252-82 will have 1/3rd of the parts needed, but you will still need rotors and calipers, as well as a new coupler to complete the set up. With you replacing a surge style actuator, I am assuming you...
view full answer...
Do you have a question about this A-Frame Trailer Coupler?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate a-frame trailer coupler information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Amanda M
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.