To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
No need to jump in and out of the cab at every campsite corner. The Demco Autoslide moves itself—automatically—to give you up to 14" of additional clearance during slow-speed turns. Its built-in rack-and-pinion gear system converts turning motion into smooth, controlled sliding, keeping your trailer clear of the cab while backing or maneuvering tight spots. You just drive, and the hitch does the work each time your rig turns more than 10 to 15 degrees.

The single-piece wraparound jaw gives 360 degrees of contact around the king pin for a tight, secure fit. That means less rattle and chucking, so towing feels steady and quiet mile after mile. A 3/4" thick solid steel locking bar backs up the connection, automatically engaging when the jaw closes so you can pull away knowing your trailer is locked in place.

The cushioned, double-pivot head moves front to back and side to side to absorb road shock and reduce noise. Three polyurethane dampeners cushion motion from both pivots, keeping bumps and rough roads from transferring through your truck and trailer. When it’s time to hook up, the head naturally tilts into position for an easier connection with less wrestling.
This hitch uses a rail-free underbed system that keeps your bed clear when it’s out. It comes pre-assembled for simple installation—just bolt on the side plates, set your preferred height between 15-1/2", 16-3/4", or 18-1/4", and drop it into the receivers. When you’re done towing, pull the safety pins, turn the handles, and lift it out to open up the full truck bed again.
With an 18,000 lbs gross towing weight rating and a 4,500 lbs vertical load limit, this heavy-duty steel hitch is ready for serious fifth-wheel towing. The solid construction and rust-resistant black powder coat give it long-lasting strength you can count on season after season.
This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement side plates for the Demco Hijacker Autoslide fifth wheel trailer hitches, and this is for the underbed mount. Now this will replace the side plates that came standard with your Demco Hijacker Autoslide underbed fifth wheel trailer hitch. They are designed to bolt onto your hitch base so that you can attach your hitch to the custom underbed rails. This is designed to fit the 13,000 pound Hijacker, Part Number DM8550041. It also fits the 18,000 pound Hijacker, DM8550022, and the 21,000 pound Hijacker, DM8550037 models. This is a simple bolt-on installation to your hitch base. There are multiple rows of bolt holes on these side plates and on your hitch base, so depending how you line them out, it will let you adjust the hitch height.
The hitch height settings will go from either 15-1/2 inches to 16-3/4 and 18-1/4, so you have your choice of those three settings to get your trailer and tow vehicle as level as possible. These do have a rust-resistant black powder coat finish. They are an all-steel construction. It does include the instructions. It will include the mounting hardware, and it also includes two 1/4-inch spacers and two 3/8-inch spacers, and the spacers are used for adjusting your hitch mount with the bed pockets of your truck, and this part is made in the U.S.A. The way that these would open up is you just pull the clip, pull the pin out, and you can see each one of these will rotate out, and when you rotate those out, it will let you drop it into your underbed mount, and then once there, you just turn this back in to lock it, and then put your clip right through there just like that. This part is made in the U.S.A. That should do it for the review of the replacement side plates for Demco Hijacker Autoslide fifth wheel trailer hitches with the underbed mount..
Ratings & Reviews

Thomas S.
2/7/2019
THE BEST FUNCTIONAL SHORT BED 5th WHEEL HITCH OUT THERE BUT ALSO THE HEAVIEST AND THE MOST DIFFICULT TO REMOVE AND REINSTALL. I HAD TO TAKE IT TO A GARAGE TO REMOVE IT AND AGAIN TO REINSTALL IT. I JUST LEAVE IT IN THE TRUCK BED NOW RATHER THAN FIGHT WITH IT.

Andy
3/15/2022
The Demco hijacker 18 K I think is the best hedge out there by far three different height settings and the auto slider part of it is awesome haven’t had an issue at all
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Buddy R.
3/24/2019
good happy with the whole set up.had a small issue that demco remedied swiftly.only other thing is the finish does not seam to last.it is covered when not in use and it chips and rust,s easily