To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The Curt A25 5th Wheel Trailer Hitch w/ S25 Slider is made for serious towing, rated for 25,000 lbs gross towing weight and 6,250 lbs vertical load. Its sturdy steel construction and carbide powder coat finish provide the strength and durability needed for long hauls with heavy trailers. The interlocking, dual-jaw system delivers full 360-degree jaw-to-king-pin contact for a solid, secure connection that stays quiet and stable mile after mile.
For short or standard-bed setups where space is tight, the built-in S25 slider gives you 12" of fore-and-aft travel to keep the trailer clear of your cab during slow-speed turns. The non-binding design slides easily and automatically latches in both directions, so you only have to step out once. It’s a simple way to get the turning clearance you need without the stress of cab contact or binding on uneven ground.
You always know exactly what your hitch is doing with Curt’s three-point indicator system. The color-coded markers show red when uncoupled, yellow when ready to couple, and green when locked in for towing. The handle locks for security and resets itself after you unhook, so it’s ready to go the next time you’re hitching up. Visibility from the cab adds extra peace of mind before every trip.
The A25’s spherical axial bearing allows full 360-degree head movement for smooth articulation between truck and trailer. This design suppresses road shock and reduces the clunking or chucking that can wear on both rig and driver over long distances. The torsion head self-aligns for easy coupling and helps keep towing quiet and controlled over rough highways or uneven campsites.
When it’s time to clear out your truck bed, the A25 breaks down quickly thanks to its fast one-pin head removal. A single person can lift off the head without tools, making storage simple between trips. Built-in zerk fittings make lubrication easy, and the included plastic lube plate lets the king pin glide smoothly into place every time you hook up.


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff for etrailer.com. Today we take a look at the Curt custom fifth wheel bracket kit for your Ford F-150 trucks. Now this is a custom fit kit, this is designed to fit the 2015 and newer Ford F150 trucks and on a custom fit part like this, I do recommend for you to go to our website, use the fit guide, put in your year and model vehicle and it'll show if this'll work for your application. Now, these brackets will Mount beneath your truck bed and they provide the attachment points for your fifth wheel rails. The rails is what allow you to attach the fifth wheel to the vehicle. This does require the Curt base rails, part number C16104 or part number C16204.
Both of those items, we do sell separately on our website. I happened to pull one of those parts and this happens to be one of the rails. The rails you'll buy, they come in a set of two, but basically these rails, is what will attach to these brackets. So once these brackets are installed under the bed and then inside the bed of your rails will be installed, and it has the slots for your fifth wheel to fit into. But again, we sell those separately on our website.
So these brackets here provide a nice custom fit by mounting to existing holes in your vehicles frame. This will help minimize the amount of drilling that's required and it cuts the installation time in half when compared with just a universal bracket kit, and this kit will include everything laid out here on the table. It's all the necessary hardware you need, all the brackets you need and even up front here, it comes with this galvanic isolator kit. And what that is, is on vehicles that have an aluminum bed like the Ford F-150. It is required that all steel components be isolated from the aluminum by using this galvanic isolator kit.
And in the instructions it does show you where to install that. This is designed to work with Curt Draw-Tite Reese and Husky fifth wheel hitches, but that should do it for the review on this Curt custom fifth wheel bracket kit for the Ford F-150 trucks..
Ratings & Reviews

Shannon N.
12/29/2023
Yes it all arrived yesterday .I just wasn't expecting it on three different trucks. I am happy with the hitch and the timely shipping. Merry Christmas.


Nathan L.
3/19/2021
One-year update: weve now put over five thousnad miles on our eleven-thousand pound fiver, and have had zero issues with the hitch. thats with numerous hitch-unhitch cycles, and a few long, steep grades to pull. The hitch works just as well as the day we installed it. The only shortcoming is its shear weight when lifting it out of the bed. Fortunately, the hitch proper lifts out of the spider mount by simply pulling one pin. That way, it can be removed in two pieces. Its still a two-person job, but is manageable. Thanks again, etrailer!

Mark M.
5/7/2020
As advertised
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Katrina D.
12/23/2023
Tracking is showing that it has finally arrived. Can you please let me know if the tracking is correct or not? Sometimes, packages will deliver to the wrong address, so I also recommend you contacting your neighbors if you still have not received it to see if they got it in your place.