See what our Experts say about this CURT 5th Wheel Hitch

• Replacement Hardware To Attach Curt 5th Wheel Legs To Curt A20 Head
  Hi Dave! We actually have the Replacement Head Mounting Hardware for Curt 5th Wheel Hitches # C35UR that is exactly what you are needing. It includes qty.4 of the following: M14 45mm Bolt M14 Flat Washer M14 Split Washer M14 Nyloc Nut You will also want to torque these down to 100 ft-lbs when installing the Curt Legs 16017 (our part # e29PR) on the Curt A20 Head Unit # C16540. Are you moving this hitch to a Ford truck from a different truck?
  view full answer...
• Can Curt A20 Fifth Wheel Hitch be Converted to Fit OEM Ford Puck System
  Hey Jason, it sounds like you are asking if there is a way to convert your Curt A20 fifth wheel hitch to fit directly to Ford F-350 OEM pucks. For that you'd just need the leg kit part # C16017 as this will replace the legs of your hitch and give you a hitch that fits directly. It essentially would then become the # C16034.
  view full answer...
• What BedRug Sections Need Trimming when Installing a Curt A20 Hitch on My 2022 Ford F-350?
  When fitting a fifth-wheel hitch like the Curt A20 # C16034 on your 2022 Ford F-350 Super Duty with the BedRug Custom Truck Bed Liner - Full Bed Protection for Trucks with Bare Beds or Spray-In Liners # BRQ17LBK, it is important to the hitch completely level on the truck bed so that it will not have the possibility of wobbling. With that being said, you will need to trim a longer area for the bottom feet. I went ahead and attached some photos that show that the feet are flat for the entire...
  view full answer...
  
• Fifth Wheel Hitch That Fits in Pucks of 2017 Ford F-350 With 8-Foot Bed
  There are a number of high-quality fifth-wheel hitches that will fit into the puck system of your 2017 Ford F-350 Super Duty. Reese makes two of those, called the Elite Series, which is available in towing capacities of 20,000lbs # RP30921 and 27,000lbs # RP30921. In between those weight ranges is the Demco Hijacker # DM8550033, which has a 21,000 lb capacity. Finally there is Curt, which has different fifth-wheel hitches that will fit in the pucks of your F-350's bed. The A16 # C16520-16017...
  view full answer...
• Under Bed Fifth Wheel Hitch Rail Recommendation for 2017 Ford F-250
  Essentially the factory Ford fifth wheel rail system is a Reese rail kit, but Reese doesn't sell the rail kit for your truck and the only way to get it would be directly through Ford. Curt does offer a fifth wheel hitch that fits that rail kit directly though with the A20 part # C16034. Another option is the B and W Companion Hitch and Gooseneck setup that consists of the rail kit/gooseneck hitch # BWGNRK1116-5W and then the fifth wheel hitch part # BWRVK3500-5W. The rail kit doubles...
  view full answer...
• Which Is Better, The Curt A-Series Or Q-Series Fifth Wheel Hitches
  The Curt A-Series line is the premium version over the Q-Series line and comes with a few differences. One major difference being the jaw design for the A-Series, which overlaps itself instead of just butting up to itself like the Q-Series does. This allows for a more secure connection to the king pin. The other major difference is that the head is made stronger in order to withstand the pressure from a rotating pin box. The Q-Series is incompatible with rotating pin boxes like the Reese...
  view full answer...
• Excessive Movement Between the Curt A20 5th Wheel Hitch and 5th Wheel Trailer King Pin
  First, make sure that the jaws are fully closing around the king pin and that they are locked into place. If not then that would be why you are experiencing so much movement. If they are fully closing and locking then it is possible that the movement is actually coming from somewhere else such as at the connection between the head and the center section or the feet and the OEM Ford mounts. There are some things you can look at on the hitch to determine if the jaws are not fully closing....
  view full answer...
• Pros and Cons Of 5th Wheel Hitches With 20K Rating For 2019 Ford F-350 With OEM Prep Package
  Both the B&W 20K hitch part # BWRVK3300 and the Curt A20 part # C16034 are great options for the 2019 Ford F-350 Super Duty with factory prep package but there are some pros and cons to each. The Curt A20 part # C16034 does have an interlocking jaw that provides 360 degree contact with the king pin to eliminate rattling and chucking. It also has a color coded indicator system that tells you when the hitch is ready to uncouple, couple or tow that is visible from the cab so that is a nice...
  view full answer...
  
• How to Tell If 2019 Ford F-250 Has Factory 5th Wheel Rail or Prep Package
  The factory rail/prep kit for the 2019 Ford F-250 refers to an integrated puck system in the bed that allows certain 5th wheel hitches or gooseneck balls to mount directly to them, eliminating the need for standard above-bed base rails like what are traditionally used to install a hitch. This allows for a completely clean bed once the hitch itself is removed and less moving parts so I definitely recommend going this route if able. I have attached an image of a factory puck system on Ford...
  view full answer...
  
• Does the Curt A20 Fit the Ford Factory Puck System?
  Yes, there are a couple of ways to make a Curt A20 work in the Ford factory puck system. The easiest way is to use the Curt A20 5th Wheel Trailer Hitch item # C16034. This 5th wheel hitch comes with the legs that mount inside the Ford puck system. If you already have the Curt A20 item # C16140 you were looking at, you can add the Curt OEM 5th-Wheel Hitch Legs item # C16017 or just use the Adapter Rails item # C88KR. Both options will work and not reduce the capacity.
  view full answer...
• How To Lower Nose Of 5th Wheel Trailer While Using B&W Companion OEM Ford Super Duty
  Yes, it is possible to change out the B&W Companion OEM 5th Wheel Hitch part # BWRVK3305 for the Curt A20 5th Wheel Trailer Hitch part # C16034 as this would then lower the hitch head height up to 3-3/4". However, you will still need to maintain at least 4-6" from the top of the bed sides to the loft of the trailer so you may not just be able to lower the hitch head all the way down. I will say the issue you have is a pretty common one nowadays since trucks are getting taller than they...
  view full answer...
• Curt Q20 vs Curt A20 on 2014 Ford F-350 with Factory Pucks
  This is a great question and one that we actually get quite often. Basically the Curt A20 5th Wheel Hitch # C16034 is the upgraded version of the Q20 # C16530-16017 and it's the one I specifically recommend. The upgrades in question focus mostly on the head design. The A20 features an interlocking 2-jaw system as opposed to the standard 2-jaw system on the Q20. This interlocking mechanism allows the jaws to completely wrap around the king pin for a better connection and a smoother, quieter...
  view full answer...
• Best 5th Wheel Trailer Hitches for a 2011 Ford F-250 Long Bed
  There are several 5th wheel trailer hitches that will fit the factory pucks in a 2011 Ford F-250 long bed. One of the most popular is B&W Companion # BWRVK3300. This hitch is rated for 20,000 pounds gross trailer weight and is made in the USA. There is also a 25K version, # BWRVK3305. We also have some options from Curt including the 24K hitches # C16039, or # C16036, 20K hitches # C16034 and # C16530-16017, and 16K hitch # C16520-16017. All of these hitches feature cushioned heads for...
  view full answer...
• Comparing the Curt 20K and B&W 20K 5th Wheel Hitches for a 2019 Ford F-350 with Factory Rail Kit
  The Curt A20 5th Wheel Trailer Hitch part # C16034 and the B&W Companion OEM 5th Wheel Trailer Hitch part # BWRVK3300 are both excellent options for a 2019 Ford F-350, two of my favorites in fact. I recommend the Curt A20 for a few different reasons which I have attached below. In regards to weight, they both book in at about 150 lbs fully assembled however the heads on either unit can be removed to break up some of the weight. In order to remove the head on the Curt A20 you only need...
  view full answer...
  
• Choosing Curt A20 or B&W Companion 5th Wheel Hitch for 2022 Ford F250 With Puck System.
  Because it's domestically manufactured, and it can be raised to a greater height, I'd recommend the B&W # BWRVK3300 Companion, but honestly you can't go wrong either way. The # C16034 A20 and the # BWRVK3300 Companion both have a 20K capacity. Both use dampened hitch heads that help to isolate road shock experienced by the 5th wheel from the tow vehicle. Both hitches have a rather unique jaw setup that grips the 5th wheel king pin very tightly, to prevent the king pin from moving around...
  view full answer...
• Gooseneck Ball Hole Cover and 5th Wheel Hitches for 2011 Ford F-350 with Factory Prep Package
  For a plug that will fit the gooseneck ball hole in your 2011 Ford F-350 with the factory 5th wheel/gooseneck prep package you can use # RP30136. A trim ring for the gooseneck hole is not available. I will be happy to help you out with a 5th wheel hitch. There are several that will fit directly into the puck system in your truck: B&W Companion 20K # BWRVK3300 B&W Companion 25K # BWRVK3305 Curt 20K # C16034 Curt 24K # C16036 Demco 21K # DM8550033 Reese 20K # RP30921 Reese 27K # RP30922 I...
  view full answer...
• 5th Wheel Trailers Hitch that Fits Directly in 2011 Ford F-450 Factory Prep Package
  There isn't a way to adapt the Hi-Rise # 9480 to the Ford factory prep package on your 2011 Ford F-450. There are a couple of options for you. First, if you want to use an adapter you can use the Andersen Ranch Hitch, # AM3100. I have linked a video review of this adapter for you. The other option is if your F-450 has the 4 pucks and not just the gooseneck hitch. There are 5th wheel hitches that will fit directly into the factory pucks. Here is a list of ones that will fit directly without...
  view full answer...
• Pros and Cons of 5th Wheel Hitch With 20k Rating for 2017 Ford F-350 with Factory Rail Kit
  When comparing the B&W Companion To the Curt A 20, there are some basic differences that make both models attractive. The B&W Companion # BWRVK3300 has a very sturdy base that can be easily disconnected from the hitch head and the pivot arms are easily adjustable and have not only height adjustment but can move either closer to cab or farther from cab. It weighs about 150 lbs in total. The negative is the lack of cool features like a coupler indicator and the standard B&W gray color. The...
  view full answer...
• 5th Wheel Trailer Hitch For 2020 Ford F-250 Super Duty Long Bed
  For a 5th wheel hitch on your 2020 Ford F-250 Super Duty I highly recommend the Curt A20 because it is high-performing but not excessive in cost compared to similar hitches. It is also has a sturdy dual jaw system which makes full contact with your king pin to give you a comfortable ride, as well as a color-coded lock indicator which makes the hitch easy to use. The right Curt A20 will depend on if your 2020 Ford F-250 has the factory fifth wheel prep package or not: - With Factory Prep...
  view full answer...
  
• How Many Bolts Come with Curt A20 5th Wheel Trailer Hitch with Ford OEM Legs # C16034
  I attached a picture that shows all of the hardware that comes with the Curt A20 5th Wheel Trailer Hitch with Ford OEM Legs # C16034. Sounds like you have all of the correct hardware as you mentioned the 4 bolts seen in this picture.
  view full answer...
  
• Will Curt A20 Fixed Fifth Wheel Hitch fit in 2017 Ford F-250 Short Bed With Factory Rails?
  The Curt A20 with Ford OEM Legs # C16034 will fit into the puck system of your 2017 Ford F-250. However, there may not be enough clearance on tight turns and your trailer could very well hit the cab of your F-250, so it is strongly recommended you use a Sidewinder with a fixed hitch as a way to protect your cab from damage. Otherwise, you may want to consider Curt Q20 # C16530-16020, a sliding hitch which also fits in the factory puck system of your '17 F-250. Should you want to go with...
  view full answer...
  
• Does the Curt A20 5th Wheel Hitch Come with Instructions and Hardware for Installation
  The Curt A20 5th Wheel Trailer Hitch # C16140 comes with instructions and all of the hardware needed to install on Industry Standard Base Rails. If you already have base rails installed on your 2012 Ford F-350 then you are good to go. If you have the factory rail kit then you will need to go with the A20 part # C16034. If you have no base rails or the factory rail kit installed on your F-350 then I recommend the Curt Custom 5th Wheel Installation Kit for Ford # C16424-204 which is compatible...
  view full answer...
• Difference Between Curt A20 C16034 and C16017
  The Curt A20 5th Wheel Trailer Hitch # C16034 referenced in your question is the complete 5th Wheel Hitch for your 2017 Ford F-350 with the factory rail kit. This hitch includes the legs that will drop directly into the 4 receiver pucks that are built into the factory underbed rails on your truck. The Curt # C16017 that you also mentioned is just the leg assembly for the above 5th Wheel Hitch. The head is not included. I have attached a short video review of this 5th Wheel Hitch for...
  view full answer...
• What Do the Individual Parts of the Curt A20 for a 2019 Ford F-350 C16034 Weight Broken Down
  When you break down the Curt A20 # C16034 the head is going to weigh roughly 100-lbs and the legs that fit in the factory pucks of your 2019 Ford F-350 are going to weigh about 25-lbs each (50-lbs total). We don't know the exact measurements as to how the puck system on Ford trucks is oriented, and it will vary between the short and long beds, but it will either sit directly over the axle (short bed) or slightly in front of the axle (long bed).
  view full answer...

Do you have a question about this 5th Wheel Hitch?