Can You Back Up with Curt TruTrack 2P Weight Distribution System

Question

Question:

Does this system allow for backing up while turning? Also, how precise is the tongue weight spec? My trailer claims 630lb tw, and I will adding to that load.

asked by: Joe W

0

Expert Reply:

Hey Joe, yes the Curt TruTrack 2P part # C79JR does allow backing up as long as you are backing up mostly in a straight line. If you are going to get close to jackknifing the trailer at all though you would need to remove the springs bars. This is basically how all WD systems are though so this one is no different.

expert reply by: Jameson C

0

Answer 1

Yes, you are able to switch to the 2" Ball #A-90 on the Curt TruTrack 2P Trailer Mounted Weight Distribution System #C69JR. As Curt does not offer the hitch with a 2" ball you will have to change it out yourself or have it done at the shop…

view full answer...

Answer 2

It sounds like your system may be overloaded. The first thing I would recommend is finding your actual tongue weight. Your Curt #C79JR (17600) has a tongue weight range of 800-1,000 lbs. If your tongue weight is around 1,000 lbs you're already at…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 7

I have linked an installation video for the etrailer Trailer Hitch Receiver #e28AR which was installed on a 2021 Hyundai Santa Fe Hybrid near the bottom of the page. This is the newest hybrid we have been able to get into our shop to have a receiver…

view full answer...

Answer 8

Hey Charles, yes we do have the Curt trailer wiring harness part #C98RV that is a confirmed fit for your 2024 Hyundai Santa Fe.

view full answer...

Answer 9

Hi Chris, Yes, you'll need the Curt Trailer Hitch Receiver #C37RV. This class III trailer hitch has a 4,000lb maximum towing capacity and 600lb tongue weight capacity, but you'll still want to refer to your Santa Fe's owner manual to…

view full answer...

Answer 10

Hi Michael, I have a universal trailer wiring option for you, but you are correct that the custom fit trailer wiring harnesses for your 2024 Hyundai Santa Fe are not available yet. I just checked with my manufacturer contacts, and they confirmed that…

view full answer...

Answer 11

Hello again, Doug. Thanks for providing all that detailed info. It definitely helps! You are on the right track with the 12K Blue Ox 2-Point Weight Distribution w/ Sway Control #BLU75FR. This will work on trailers with a tongue weight between 800 and…

view full answer...

Answer 12

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Can You Back Up with Curt TruTrack 2P Weight Distribution System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching