Wiring Diagram and Instructions for a Tekonsha Prodigy P3 Brake Controller
Updated 12/31/2025 | Published 10/27/2023
Products Featured in This Question
Question:
Can the P3 90195 be wired to the factory brake controller wiring harness on a 2023 Ford Transit 350? If so, is there a schematic available to reference?
asked by: Marshal
Expert Reply:
That is the only way you'd be able to install the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 on your 2023 Ford Transit T350 since there is no custom fit wiring harness.
To install this, you'll first need to find the cold side of the stop light switch which will only display voltage when the brake pedal is pressed. Once you've found this, you'll connect the red wire from the pigtail harness to it.
You'll then have to connect the black wire to the positive side on your battery, the white wire to the negative side of your battery, and the blue wire to the brake output wire on your 7-way.
Attached is a diagram from Tekonsha showing you how to hook these wires up.
If you don't already have a 7 way you'll need to add one by first adding a 4-pole with # C56327 then a 7 way with # ETBC7.
(click to enlarge)
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: etb7 kit
- Shop: Curt TriFlex NEXT Trailer Brake Controller w/ Plug-In Harness - 1 to 4 Axles - Proportional
- Search Results: tekonsha wiring
- Search Results: 4 way flat to 7 way round
- Search Results: cargo liner
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Van Cargo Mat
- Search Results: 4 pin to 7 pin adapter
- Search Results: etbc7 wiring kit
- Search Results: seven pin
- Shop: Demco Recon Stealth Gooseneck-to-5th Wheel Trailer Hitch Adapter - 20,000 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Towing Mirrors
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Guardian Comfort Custom Floor Mat for Cargo Vans - Black - Thermoplastic
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Review of CURT Trailer Brake Controller - Universal 7 Way and 4 Way Connector - C76NQ
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Truck Bed Auxiliary Tank
- Video: Let’s Check Out the Curt Universal Installation Kit for Trailer Brake Controller
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Suspension Enhancement
- Q&A: How To Add a 7-Way Trailer Connector To a 2022 Mazda CX-9
- Video: 2019 Ford Transit T350 Curt Trailer Hitch Receiver: Complete Installation
- Q&A: Wiring Configuration for Tekonsha Prodigy P3 Trailer Brake Controller 90195
- Q&A: How Can I Be Sure My Curt Triflex Brake Controller Is Working Worrectly
on Accessories and Parts
Bernard J.
12/31/2025
Bryce, I have the 301500 adapter cable assy for my Tekonsha P3 in my 2005 Silverado 1500. I plugged it in per spec (instructions), but have no power to the P3. No display, nothing. Is there a fuse on the Chevrolet C1500 that powers the black lead for the P3? The black power lead is pin 2 on the 6-pin connector. Thanks in advance! Bernard