Replacement Atwood Water Heater Door and Hinge Kit For 6 Gallon Water Heater

Question

Question:

Do you have the frame that the door sits on? My neighbor was mowing and hit the door and bent the pins at the bottom.

asked by: Steve J

1

Helpful Expert Reply:

Currently we do not carry the Hinge Kit 91858 which is needed to replace the bent hinges and install the Replacement Door for Atwood RV Water Heaters # AT91386.

expert reply by: Bud M

1

Bent Water Heater Door Hinge
(click to enlarge)

Bent Water Heater Door
(click to enlarge)

Answer 1

Hi Ricky; the longest extender we have that fits a 2" receiver is the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long #HE18. Are you trying to clear something specific on the back of your Sprinter? Depending on what…

view full answer...

Answer 2

Hello James, We have a hitch extender for you that'll work to protect your Ford Maverick from making contact with your motorhome, though the MaxxTow Hitch Extender with Step #MT70069 is ill suited for the job. Reason is the total capacity of your…

view full answer...

Answer 3

From the center of the tube to the furthest part of the motor housing on the Stromberg Carlson Electric Trailer Jack item #JET-5000 measures right at 5-3/4". The distance from the mounting bracket to the top of the jack is 23". This jack…

view full answer...

Answer 4

I recommend replacing your jack with our Electric Jack #EJ-3520-BBX. This is a simple jack without the bells and whistles like you are looking for. You get a light, electric jack and manual override should the electric motor die. The jack will bolt…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

We're glad you found us too, William! I see you've ordered the Curt Hitch #C45CR for your 2022 Toyota Highlander along with the Adapter #e58YR and Anti-Rattle #e99007 - these will work great for your setup! Just note that you'll need an…

view full answer...

Answer 9

Hey there Lisa, hope you're having a great day. So you actually brought up a really good question. The etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers #e38FV uses a gate that comes down and makes contact with the shank of the bike…

view full answer...

Answer 10

Hey Gene! There's nothing on the market that's going to fit all of your requests but I've got one that's pretty close. The highest capacity 4-bike bike rack is going to be the Benton Shifts & Grins item #B82FR. It has a 55 lbs…

view full answer...

Answer 11

Hello Joseph, yes there is! What you are looking for is the Anti-Rattle Hitch Lock and Cable Lock for 2" Hitch Mounted Bike Racks #e88RV. This will work with the Benton Bike Rack #B54VR, as well as the #B94FR and #B54FR so that the bike and rack…

view full answer...

Answer 12

Hey Tom, yes the Erickson Cargo Carrier part #EM34JV would work great for you as it has the needed clearance to fit past the rear of your RV as well as has the needed weight capacity.

view full answer...

Replacement Atwood Water Heater Door and Hinge Kit For 6 Gallon Water Heater

Product Page this Question was Asked From

Continue Researching