Trailer Wheel and Tire Spare for Size 4.80-12

Question

Question:

my trailer has 4.80-12 n72 tire on a 5 bolt wheel , what does the n72 mean. can i use any 4.80-12 - 5 bolt wheel combo as replacement.

asked by: Brodie I

0

Expert Reply:

N72 isn't a standard tire code that means anything we can determine but the good news is you can basically use any trailer tire and wheel with the 4.80-12 tire size on a 5 lug wheel like the # AM30660 which will work great. This has the 5 lug wheel bolt pattern you need as well.

expert reply by: Jameson C

0

Answer 1

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 2

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 3

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 4

Yes, the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 referenced in your question will fit the same 12 inch wheel with a 4 inch width that your existing 4.80-12 size tires are mounted to. Just note that the ST145/R12 tire will be…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The closest metric trailer tire size to a 4.80x12 is going to be a 145/80-12. The typical diameter of a 4.80x12 tire is 20.5 inches. On a 145/80-12, it is 21.3 inches. So the metric size will be a little over 1/4 inch taller. Make sure to measure the…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hey Eric, It's pretty normal to go up a load range if you're feeling like the trailer is being overloaded since tire wear and capacity go hand in hand. It's ok to have some extra capacity when it comes to the wheels, however, going with…

view full answer...

Answer 12

Hey Keith, if you exceed the speed rating of your trailer tire you will end up overheating the tire and that will most likely cause it to fail. This is definitely going to be very likely if you are driving 12 to 14 hours at a time. Best option would…

view full answer...

Trailer Wheel and Tire Spare for Size 4.80-12

Product Page this Question was Asked From

Continue Researching