Recommended Handrail For 2 Step Lippert Solid Step

Question

Question:

Why won’t this work on the two step? Can it be modified to fit? I have access to machine and weld shop.

asked by: Kim P

0

Expert Reply:

The way the Lippert Entry Assist Handrail for SolidStep Manual RV Steps part # LC799640 installs and where it mounts will not fit on a 2 step Solid step like part # LC713662. There is no where for the bottom piece of the hand rail to install. I have attached a photo for your reference. For this reason I cannot recommend modifying the rail.

I recommend to use a Stromberg Carlson Folding Handrail for Fleet RVs part # AC-544 which installs on the side of the RV and folds up against the trailer when not in use. I have attached the dimensions of the hand rail for your reference.

expert reply by: Heather A

0

click to enlarge

Answer 1

This handrail only fits a type of step that comes in a 4 step configuration. If you can let me know which specific step setup you have or send pics of it I can see what options you have.

view full answer...

Answer 2

I went out to our warehouse to take a few measurements on the mounting bracket for the Brophy Camper Scissor Steps #AS24. The base bracket profile measures 24 inches long, 1 inch tall, and 1 inch deep. The shorter tabs that will be closer against the…

view full answer...

Answer 3

The Brophy Aluminum RV Scissor Steps #AS24 that you referenced have a 300-lb capacity and extend to between 31- and 39-inches in height. In order to accurately recommend stairs, I'll need to know the distance from where the steps mount to the…

view full answer...

Answer 4

Your concern about being potentially trapped inside your RV is certainly a valid one, and also a common one with the Stromberg Carlson Lend-a-Hand. While there isn't a way to easily stop it from pivoting across the front of the door, there truly…

view full answer...

Answer 5

I called my contact at Brophy about the RV Scissor Steps, part #AS24. They told me if you have between 31 and 39 inches of distance from the mounting bracket to the ground, the steps will work well for you. I have attached a photo of the steps with…

view full answer...

Answer 6

The weight capacity of the Aluminum Scissor Steps, item #AS24, is 300 pounds.

view full answer...

Answer 7

The Hand Rail part #AHR3 that you referenced includes a mounting bracket that will attach to the trailer and allows a pin to run through the handle to secure it to the bracket. For more info check out the review video I attached that shows the 4 step…

view full answer...

Answer 8

Thanks for all of the information Daniel! The Hellwig Big Wig Rear Anti-Sway Bar item #HE24MR will definitely fit your 2024 Ram 3500 diesel. This will work with both 2WD and 4WD models and is also compatible with the dually models as well. I have…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hi Andrew; the Hellwig Big Wig Rear Anti-Sway Bar #HE24MR is specifically designed for Ram 3500 models with a diesel engine like yours. It is also a fit for the dually models so you can install it on your 2024 Ram.

view full answer...

Answer 11

Hey Dan, thanks for reaching out! If you have the Progressive Dynamics 4000 Series System #PD4060K then it looks like removing the black and white wires will disconnect the converter section (see attached photo), which charges the battery. I do…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Handrail For 2 Step Lippert Solid Step

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching