Search: Trailer Jack Socket   >   !Tow Bars   >  

Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill ...
Features: Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy

• Trailer Jack
• Camper Jacks
• Tools
• Ultra-Fab Products

Measure your trailer's tongue weight with this easy-to-use scale. Connect the scale to either your trailer's ball coupler or to its 2" jack for a weight reading. Unlike other scales ...
. Position the scale right under your coupler so that the ball will fit into the coupler's socket. Lower your trailer down until its weight is fully supported by the scale and not the jack. Then use

• Analog Scale
• 2000 lbs
• etrailer

Vented caps keep the inside of your RV's drinking water hose clean and safe from dirt and insects. Male and female threaded connections let you keep 1 hose protected while it stays in storage.

• RV Drinking Water Hoses
• Hose Caps
• Valterra

Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 27-1/2", and 18" of screw travel. Drop leg offers an extra ...
Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle

• Pop Up Camper
• Teardrop Camper
• Travel Trailer
• A-Frame Jack
• Leveling Jacks
• Tongue Jack
• Electric Jack
• Bolt-On
• etrailer
• Steel
• 1 Jack
• 3001 - 4000 lbs

Automatically level and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorized jacks can be operated by the included control panel or via your smart device (if RV ...
hands-free operation while jack lifts and lowers Hitch recognition automatically returns your trailer to the position at which you unhooked Wall-mount touchpad controller has easy-to-read buttons and LCD

• Travel Trailer
• Leveling Jacks
• Stabilizer Jacks
• Electric Jack
• Bolt-On
• Lippert
• Steel
• 5 Jacks
• 9001 - 10000 lbs

Heavy-duty, sturdy steel ball mount measures 10-1/2" from pin hole to ball hole. Use this Class lll accessory in either the drop or rise position to fit your specific application.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately

• Fixed Ball Mount
• No Ball
• Drop - 2 Inch
• Rise - 1 Inch
• 6000 lbs GTW
• Class III
• Draw-Tite
• 1 Inch Ball Hole Diameter
• Steel Shank - Gloss Black

Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 4 Precise, motorized jacks can be operated by either the included touchpad. Hitch recognition memory ...
harnesses, and mounting hardware Specs: Application: 5th-wheel trailers with a GVWR up to 15,500 lbs Quantity: 4 jacks Total travel: Rear jacks: 12-1/2" Front jacks: 21" 1-Year limited Warranty Note

• Fifth Wheel Camper
• Leveling Jacks
• Stabilizer Jacks
• Electric Jack
• Bolt-On
• Lippert
• Steel
• 4 Jacks
• 10001 lbs or More

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes ...
Features: Leaf spring acts as part of your trailer's suspension system Provides attachment point for your trailer's axle Multiple leaves allow flexibility to absorb road shock Allows

• Double Eye Springs
• 1-3/4 Inch Wide
• 25-1/4 Inch Long
• etrailer
• Painted
• 4000 lbs

This electric side-mount jack offers 14" of screw travel. Spring-loaded pull pin quickly releases the 8" drop leg. 3 LED lights allow easy setup at night. Sealed surfaces resist corrosion ...
Features: Electric marine jack lets you lift and lower your trailer quickly and easily Powered drive provides quiet operation and efficient use of electrical power No more hand cranking Weatherproof

• Utility Trailer
• Enclosed Trailer
• Car Hauler
• Boat Trailer
• Tongue Jacks
• Leveling Jacks
• Electric Jack
• Bolt-On
• Fulton
• Steel
• With Round Foot
• 2001 - 3000 lbs

Extend your trailer hitch receiver opening to clear your spare tire when using your hitch-mounted bike rack. Prevents your trailer from hitting a rear-mounted propane tank when making sharp turns ...
Features: Extends trailer hitch receiver opening out from the rear of your vehicle to avoid obstacles Get extra clearance for your trailer Mount your bike rack without having to remove your

• Hitch Extender
• Cargo Carriers
• Hitch Mounted Accessories
• Bike Racks
• Fits 2 Inch Hitch
• etrailer
• 8 Inch Extension
• 3500 lbs

Tow your vehicle without installing a tow bar or base plates. This galvanized tow dolly features hydraulic disc brakes for safe, controlled stopping and folding ramps for compact storage. Fits towed vehicle tread width between 42" and 76". Wheeled jack makes it easy to maneuver dolly Easily swings up to stow alongside trailer tongue Safety chains included Galvanized finish resists rust and chipping Made in the USA Specs: Application: Maximum

• Tow Dolly
• Wheel Decks
• Folding Tongue
• 8-1/2W x 11L Foot
• Demco
• Galvanized Steel
• 4800 lbs

Angle-cut design allows the ball mount to slide in your hitch with ease. 6,000 lb capacity. This ball mount provides 15-3/4" of clearance from the hitch pin hole and requires a hitch ball with a 1" shankFeatures: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitch receiver Ball platform provides mounting point for hitch ball (sold separately

• Fixed Ball Mount
• No Ball
• Drop - 2 Inch
• Rise - 1 Inch
• 6000 lbs GTW
• Class III
• Hidden Hitch
• 1 Inch Ball Hole Diameter
• Extra Long Shank
• Steel Shank - Gloss Black

Steel-on-steel friction works to prevent and correct trailer sway in this unique weight distribution system. Sway control brackets ensure that your trailer stays in line with your tow vehicle ...
jack System includes head assembly, adjustable shank, spring bars, sway control brackets, hitch ball, lift handle, pin and clip, and all necessary hardware 1-7/8" Thin walled socket (EQ70-00-4800 -

• WD With Sway Control
• Some Sway
• Electric Brake Compatible
• Surge Brake Compatible
• Allows Backing Up
• Equal-i-zer
• 1100 lbs
• 1000 lbs
• Includes Shank

The hinged ball socket and pin fastener on this coupler ensure a secure connection every time. The flip latch pulls the collar back to open the ball socket. The black powder coat finish is corrosion ...
Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Sleeve-lock design ensures tight fit around hitch ball for secure connection

• Standard Coupler
• 2 Inch Ball Coupler
• etrailer
• Weld-On
• 7000 lbs GTW

Durable cast coupler features the easy-to-use Wedge Latch for simple, quick hookup and a 4-1/2" mount pattern for easy installation. Can also be welded onto application.Features: Heavy-duty coupler is ideal for utility, livestock, cargo and construction trailers Wedge-style latch is secure and easy to use Gray primer coat for easy welding Flat-mount design installs

• Fixed Coupler
• 2-5/16 Inch Ball Coupler
• Bulldog
• Bolt-On
• Weld-On
• 20000 lbs GTW

... round jack. Bolt-on installation. corrosion Bolt-on installation Cutout in top plate fits jacks with 2-1/4" diameter outer tubes Specs: Application: A-frame trailers Ball size: 2" Weight capacity: 10,000 lbs Overall length

• Standard Coupler
• 2 Inch Ball Coupler
• Demco
• Bolt-On
• 10000 lbs GTW

Designed to work with most scissor jacks, this unique T-slot drill attachment is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works ...
Features: T-slot attachment lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking

• Trailer Jack
• Camper Jacks
• Tools
• Ultra-Fab Products

The hinged ball socket and pin fastener on this coupler ensure a secure connection every time. The flip latch pulls the collar back to open the ball socket. The black powder coat finish is corrosion ...
Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Sleeve-lock design ensures tight fit around hitch ball for secure connection

• Standard Coupler
• 2-5/16 Inch Ball Coupler
• etrailer
• Weld-On
• 12500 lbs GTW

This absolute monster of a tow bar can handle towing your heaviest vehicle behind your RV, heavy-duty truck, or dump truck. Non-binding levers make for an easy disconnect on uneven terrain. Extra-long arms help you make tight turns. Specs: Fits: Blue Ox base plates Can be used with base plates from other manufacturers with adapter (sold separately) Application: 2-1/2" x 2-1/2" trailer hitch receivers Arm length (from center

• Hitch Mount Style
• Telescoping
• Fits Blue Ox Base Plates
• Blue Ox
• Steel
• Non-Binding
• 15000 lbs

Topwind A-frame jack offers powered capability with built-in drive nut. Use your drill and socket to quickly raise and lower jack, or operate it manually. 14" Travel makes this jack ideal ...
Features: Utility jack lets you raise and lower your A-frame trailer Perfect for agricultural and commercial applications Topwind handle has textured grip for easy cranking Easily flip between

• Car Hauler
• Enclosed Trailer
• Utility Trailer
• A-Frame Jack
• Leveling Jacks
• Tongue Jacks
• Topwind Jack
• Bolt-On
• Lippert
• Steel
• With Round Foot
• 1001 - 2000 lbs

Replace your truck's factory bump stop pads with these thick, durable blocks to get better handling with less sway and body roll.

• Rear Axle Suspension Enhancement
• Pads
• Overload Pads
• TorkLift

A-frame coupler is made of sturdy steel and has a durable black powder coat finish. eZ-Latch ensures fast, easy, secure hookup and disconnect. Top plate has a cutout for your 2-1/4" round jack ...
corrosion Bolt-on installation Cutout in top plate fits jacks with 2-1/4" diameter outer tubes Made in the USA Specs: Application: A-frame trailers Ball size: 2" Weight capacity: 10,000 lbs Overall

• Standard Coupler
• 2 Inch Ball Coupler
• Demco
• Bolt-On
• 10000 lbs GTW