Honda Accord Roof Rack

Select Vehicle Year

  
Roof Rack

Available Years for Honda Accord Roof Rack


Roof Racks

Get all the room you need inside your car by putting your bikes, cargo or kayak on your rooftop. Thule, Yakima, Rhino Rack, Rola and Malone roof racks are built to the highest quality specifications to accommodate all your cargo needs.

Thule, Yakima and Rhino Rack offer roof bike racks in the traditional fork mount style or in the easy to load, wheel mount style.

Cargo baskets from Rola, Rhino Rack, Yakima and Thule offer a great looking way to get your cargo out of your vehicle and safely carry it on your trip. Roof cargo bags and roof boxes can also be used if you would like some waterproof or water resistant protection for your cargo.

If you need to carry bulky skis, snowboards, kayak or a canoe, putting it on the roof is a great option to unclutter your vehicle and keep the gear safe. We offer Yakima and Thule ski racks and watersport carriers that are sturdy and safe for all your cargo needs.




Roof Top Cargo Racks and Carriers

We offer custom fit roof racks from Thule, Yakima, Rhino Rack, Rola, Inno and Whispbar that will be a perfect fit for your vehicle. Just enter your year make and model above. We also offer a full line of roof rack accessories, including roof bike racks, roof cargo baskets, roof cargo boxes, kayak and canoe carriers, roof bags, ski racks and snowboard racks. If you need to do some roof rack repairs, we also carry replacement parts for all the roof and cargo racks.


Roof Rack Accessories



Roof Rack Manufacturers



Search For Custom Fit Honda Accord Accessories
Select A Category Below



Honda Accord Roof Rack Videos

Thule Roof Rack Review - 2015 Honda Accord

Speaker 1: Today on our 2015 Honda Accord sedan we're going to be taking a look at the Thule AeroBlade Rapid Traverse roof rack system. This consists of three parts. We're gonna have our AeroBlade up at the top. This is gonna be part number THARB53. This is a 53-inch bar in silver. This is also available in black, part number THARB53B.



Yakima Roof Rack Review - 2018 Honda Accord

Speaker 1: Today on our 2018 Honda Accord, we're going to be testing the Yakima Jetstream roof rack system. That's going to consist of part numbers Y00425. And that's going to be our 50 inch Jetstream crossbars. These also come in silver under part number Y00428. Down here we have our Yakima towers, and these are going to be part numbers Y00146. Down here we have our fit kit.



Thule Roof Rack Review - 2018 Honda Accord

Speaker 1: Today on our 2018 Honda Accord, we're going to be test fitting the Thule Aero Roof Rack System. That's going to consist of part numbers THARB53, which is our 53" Load Bars up top. These also come in black under part number THARB53B. Second, we have our Thule Rapid Traverse Foot Pack, which is going to part number TH480R. Next, we have the Fit Kit, which is going to be part number THKIT1874.Now, if we look at these load bars, we see they have a nice aerodynamic shape to them along with this rubber strip up top. That's going to help cut down any drag or wind noise while you're driving.



Yakima Roof Rack Review - 2018 Honda Accord

Speaker 1: Today on our 2018 Honda Accord we're going to be test fitting the Yakima Jet Stream roof rack system. That's going to consist of part numbers Y00425 and that's going to be these, our 50-inch Jet Stream cross bars. These also come in silver, under part number Y00428. Down here we have our Yakima towers and these are going to be part numbers Y00146 and down here we have our fit kit. Now for the front bar, the fit kit's going to be part number Y061223 and for our back bar, the fit kit's going to be number Y06159.As you can see. These cross bars have a nice aerodynamic shape to them so it's going to help cut down on wind noise and drag while you're en route.



Inno Roof Rack Review - 2015 Honda Accord

Speaker 1: Today on our 2015 Honda Accord, we're going to be test fitting the Inno Aero Roof Rack System, consisting of part numbers INXB130-2. These are the Inno aero crossbars, 51 inches long. And then to hold them in place we have the Inno Through Feet, part number INXS250. And then to attach it to our vehicle, we have the fit kit here and that's going to be part number, INK592. Now this roof rack system is great for carrying a wider variety of accessories such as bike racks, cargo baskets, and cargo boxes. And unlike the flush mount system, you actually have a little more space to fit more accessories on top and if you wanted to, we do offer another style of this where the bars come out past the actual feet here to provide even more space.These are aero shaped bars that will cut down wind noise and drag while you drive.



Inno Roof Rack Review - 2015 Honda Accord

Speaker 1: Today on our 2015 Honda Accord, we're going to be test fitting the Inno Aero Roof Rack System, consisting of part numbers INXB115-2, these are the Inno Aero Crossbars, 45 inches long. We'll also be using the Inno Flush Feet System to hold those bars in place. That's going to be part number INXS200, and finally we have the Inno Fit Kit to attach it to our actual Accord here. That's going to be part number INK592.This is a great roof rack system that can carry a wide variety of accessories ranging from bike racks to cargo baskets, to cargo boxes. The shape of the bars themselves is aerodynamically shaped, so that's going to cut down the wind noise and drag while you drive, eliminate the need for any fairings that you might need for say square bars. Moving onto our end caps, they do come with a lock already installed, so once you have everything on your roof, it's going to be secured to it, and removing our end cap here, you can see that we have this rubber strip up at the top here.



Thule Roof Rack Review - 2018 Honda Accord

Speaker 1: Today on our 2018 Honda Accord, we're going to be test fitting the Thule Square Bar Roof Rack System. That's going to consist of part numbers THLB58, that's going to be our 58 inch load bars up top, our square load bars, excuse me. We have our traverse foot pack which is going to be part number TH480. Then we have our fit kit down here, which is going to be part number THKIT1874.As you can see, with our square load bars this is going to have some type of drag and wind noise while you're driving, but you can purchase a faring that's going to act as a deflector and kind of sweep the wind right overtop of the square bars to give it more of an aerodynamic look to it.If we look at our fit kit, we see it's attached, it goes overtop of our square load bar. If we look under, we see that our fit kit, our hook comes right up and under, it hooks into there, and it's tightened down and pulls itself against this rubber padding right here. If you look and see that the rubber pad and the rubber coated hook are going to be able to protect your vehicle from any type of scratches or abrasions during travel or installation.How we got this front bar in place was, we measured from the top of our windshield to the edge of our foot, the measurements that the directions gave us, so whatever vehicle you might have or with this Honda Accord, you'll get the measurements in your directions for that.



Yakima Roof Rack Installation - 2013 Honda Accord

Speaker 1: Today on our 2013 Honda Accord, we're gonna be test fitting the Yakima RoundBar roof rack system, consisting of part numbers Y00409. These are the round 50-inch crossbars for the Yakima roof rack systems. Part number Y00146, theses are the baseline towers for the Yakima crossbars. Part number Y03536, this is the RoundBar SL adapter for the Yakima baseline, Skyline, Timberline and Ridgeline towers. Part number Y06148 and Y006150, and these are the base clip fit kits that you're gonna need for your vehicle.The Yakima RoundBar roof rack system is great for carrying a wide variety of accessories on your rook or freeing up space inside your vehicle. These bars are tough and durable, and together have a combined carrying capacity of 220 pounds, but you always wanna check with your vehicle's manual to make sure you roof can withstand those weights.They're very easy to install.



Rola Sport GTX Series Roof Rack Installation - 2009 Honda Accord

Speaker 1: Today on our 2009 Honda Accord, we're going to be doing a test fit on the Rola Sports Series roof rack with GTX mounting system, part number 59757. This Rola roof rack system is going to allow you to carry roof mount accessories on your Honda Accord, things like bike racks, kayak carriers, roof boxes, and more.The crossbars have about 38 inches of usable space. They're made out of aluminum, and have an arrow style to them, which means they're going to be a lot more aerodynamic than your traditional round or square bars. And they're also going to reduce the need for a fairing. They're going to work with your standard clamp-on accessories, as well as some T-track mounted accessories. You'll simply remove or trim the rubber strip around those accessories.With the cover open, it's the perfect time to mention how it hides our included tool and protects our hardware.



Thule AeroBlade Traverse Roof Rack Installation - 2017 Honda Accord

Today, on our 2017 Honda Accord, we'll be taking a look at and showing you how to install the Thule roof rack system. This is going to consist of the Thule Aeroblade Cross Bars, part number THARB53, the Thule Rapid Traverse Foot Pack, part number TH480R, and the Thule Roof Rack Fit Kit for the Traverse Foot Pack, part number THKIT1720. The Thule Aeroblade Cross Bars are a lightweight aluminum, aerodynamic shaped cross bar, that gives you a stylish design, and allowing you to carry your roof rack accessories, whether that's your cargo baskets, cargo boxes, roof bike racks, water sport carriers, or ski and snowboard carriers. The aerodynamic shape of the cross bars is going to help to reduce wind noise and drag. These cross bars are going to work with both clamp-on as well as channel mounted accessories. We can flip our cover over, you'll see that our weather strip is easy to remove, as well as replace. It's also easy to cut, so when you're loading up your channel mounted accessories, you can cut a space to help prevent dirt, debris, and liquid from getting into your channel while still loading up your accessories. The Fit Kit is going to be a custom fit kit for your Honda Accord, and it's going to have rubber padding on any portion that touches your vehicle to help to reduce any scratches or abrasions.



Rhino Rack Roof Rack Review - 2017 Honda Accord

Today on our 2017 Honda Accord we'll be taking a look at the and showing how to install the Rhino-Rack. This is going to consist of the Rhino-Rack Vortex Aero crossbars, part number RRVA137B-2; the Rhino-Rack 2500 Series legs for the Vortex Aero bars, part number RRRLKVA; and the Custom DK Fit Kit for the Rhino-Rack 2500 Series legs, part number DK359. The Rhino-Rack Vortex Aero roof rack kit is a great solution for carrying your roof rack accessories as well as gear on your Honda Accord. This roof rack is a lightweight aluminum with an aerodynamic design, so it's going to help to reduce wind noise and drag. This design allows you to use channel-mounted as well as clamp-on accessories on your vehicle's roof, such as bike racks, cargo baskets, cargo boxes, water sport carriers, and ski and snowboard carriers. With our end cap removed, you can see that our weather strip is easy to remove and replace. It's also easy to cut down to use with channel-mounted accessories to help prevent any dirt, debris, or liquid from getting inside that channel. Then if we place on our end cap, it does lock into place, which provides extra prevention from theft and tampering to your channel-mounted accessories.



Rhino Rack Roof Rack Review - 2010 Honda Accord

Today on our 2010 Honda Accord we're going to be test fitting Rhino-Rack Roof Rack System, consisting of part numbers RRVA126B-2. Those are Vortex Arrow Crossbars, part number RRRLKVA. Those are the 500 series legs and part number DK184 and those are the clamps that will attach it to your vehicle. We already have the front one installed. You can see by the shape, it has a nice aerodynamic shape to it. Excuse me.



Thule Roof Rack Review - 2008 Honda Accord

Today on our 2008 Honda Accord we're going to be test fitting the Thule Rapid Traverse roof rack system, part number THARB53 for our aero blade, part number TH480R for our foot pack, and part number THKIT1560 for our fit kit. We'll begin our test fit by assembling our fit kit to our foot pack. To do so we'll take the pad and insert it onto the bracket here. As you can see, they are the same shape so you'll just want to press the perimeter of that pad onto the bracket. With that pressed on we're ready to put our clamp on there. We'll pull down here, line this up.



Thule Traverse Roof Rack Installation - 2006 Honda Accord

Today on our 2006 Honda Accord, we'll be test fitting the Thule square load bar system, using part numbers THLB58, TH480, and THKIT1304. With our roof rack system assembled according to the instructions, we'll begin our test fit by opening our front doors. We'll place the front bar onto the front part of our roof. To ensure that we have this bar in the correct location, we need to measure 9-7/8" from the leading edge of the windshield to the closest point of our foot pack. We'll do this measurement for both sides of the vehicle to ensure that our feet are in line with each other. Once we have it set in place, we can use the included Allen tool to tighten our Allen bolt, which will secure our clamp around the roof line of our vehicle.



Thule AeroBlade Traverse Roof Rack Installation - 2006 Honda Accord

Today on our 2006 Honda Accord, we'll be test fitting the Thule Rapid Traverse roof rack system, using part numbers THARB53, TH480R, and THKIT1304. With our roof rack assembled according to the instructions, we'll begin our test fit by opening both front doors. We'll take our front bar and place it onto the front part of our roof. To ensure that we have this bar in the correct location, we need to measure 9-7/8" from the leading edge of the windshield to the closest point of our foot pack. We'll do this measurement for both sides of the vehicle to ensure that our feet are in line with each other. Once we have it in place, we can then use the included Allen tool to tighten our Allen bolt, which will tighten our clamp around the roof line of our vehicle.



Thule Traverse Roof Rack Installation - 2010 Honda Accord

Today on our 2010 Honda Accord, we'll be test fitting the Thule square load bar system using the 58" bars, part number THLB58, the Thule Traverse roof rack foot pack, part number TH480, and the Thule roof rack fit kit for the Traverse foot, part number THKIT1560. With our roof rack system assembled according to the instructions, we'll grab our front bar and place it onto the front part of our roof. To ensure that we have our feet in the correct location, we need to measure 9-7/8" from the leading edge of the windshield to the closest point on our foot packs. We'll do this measurement on both sides of the vehicle to make sure that our feet are in line with each other. Once we have those in place, we can use the included tools to tighten down our clamps. With our clamp tight, we can slide the tool in place and close the lid of the foot pack.



Thule AeroBlade Traverse Roof Rack Installation - 2010 Honda Accord

Today on our 2010 Honda Accord, we'll be test fitting the Thule AeroBlade load bar system using the 53" bars, part number THARB53, the Thule Rapid Traverse roof rack foot pack, part number TH480R, and the Thule roof rack fit kit for the Traverse foot pack, part number THKIT1560. With our roof rack system assembled according to the instructions, we'll begin our test fit by opening both front doors. We'll grab our front bar and place it onto the front part of our roof. To ensure that we have the feet in the correct location, we need to measure 9-7/8" from the leading edge of the windshield to the closest point of the foot packs. We'll do this measurement on both sides of the vehicle to ensure that our feet are in line and in the correct location. We'll then grab the included tool and tighten down the Allen bolt on the inside of the foot packs.



Thule Traverse Roof Rack Installation - 2012 Honda Accord

Today on our 2012 Honda Accord well be test fitting the Thule Traverse Roof Rack System using part number THLB58, TH480 and THKIT1560. Now to begin our test fit weve already preassembled the roof rack system according to the instructions found within the fit kit so were ready to fit it to the vehicle. To begin well actually take up a measurement. Well measure from the top of the windshield, back on the roof 9 and 7/8 inches. This will be the location of the leading edge of our crossbar foot on both sides. We can then place our front crossbar in the correct location and after ensuring the crossbar is in the proper location we can go ahead and use the included Accutorc tools within each foot to tighten down the feet securing our front crossbar to the vehicle.



Rhino-Rack Aero Roof Rack Installation - 2010 Honda Accord Coupe

Today we are going to show you a complete Rhino roof rack for a 2010 Honda Accord Coupe. We will be using clamp kit part number DK151 and a crossbar and foot kit, part number DA126.The first step is some small assembly on the feet. Locate the M6 by 25 millimeter security screw, the spring washer and the flat washer, as well as the M6 flat nut. Take the M6 screw, slide on the spring washer and the flat washer. Com back to the foot and slide it up through the hole so that the threads are sticking out of the top of the foot. Loosely thread the M6 square nut on the top. This is going to be hole the foot attaches to the crossbar. Locate the M8 by 50 millimeter security bolt and the M8 pivot nut. On the back side of the foot, push the pivot nut into position and make sure the angled face faces outward. Back on the front side, again we are just going to hand thread the M8 security bolt. Repeat this assembly process for the other three feet. 1:05





Honda Accord Roof Bike Racks Videos

Inno Roof Bike Racks Review - 2015 Honda Accord

Speaker 1: Today in our 2015 Honda Accord, we're gonna be testing the INNO Fork Lock III roof bike rack. It's gonna be part number INA391.As you can see, we already have a bike installed, so let's take a look at some of the features.If we come up here, we're gonna see that out bike is fastened at two different points of contact. On the rear we have a strap that comes up and around the tire and fastens it down, securing it to the bike, or to the bike rack. I apologize.If we come up front, we're gonna see we have it mounted by the two forks. So you're gonna want to keep in mind that you're going to have to remove the front wheel of your tire if you want to install your bike on this rack.Something unique about this bike rack that I like is that we have a locking system that folds off and on to our fork mount. And when it's folded onto, you're gonna get a set of keys with your bike rack.



Thule Roof Bike Racks Review - 2015 Honda Accord

Speaker 1: Today on our 2015 Honda Accord, we're gonna be test fitting the Thule ThruRack Roof Bike Rack. And that's gonna be part number TH535. As you can see, we already have a bike installed. So let's take a look at some of the features. Our bike is gonna be secured at two different points of contact on the roof bike rack. As you can see back here, we have a strap that wraps around the rear wheel and straps it firmly into this cradle.



Inno Roof Bike Racks Review - 2015 Honda Accord

Speaker 1: Today on our 2015 Honda Accord we're going to be test fitting the Inno Fork Lock Roof Back Rack. It's going to be Part Number INXA391. As you can see, we already have a bike installed, so let's take a look at some of the features.If we look back here, we're going to see our bike is secured at two different points of contact. On the rear we have this strap that comes . Wraps up and around the base of our wheel and just fastens it down like that. Up on the front we have a fork mount, and as you can see we have removed the front tire of our bike.



Rhino Rack MountainTrail Roof Bike Racks Review - 2010 Honda Accord

Today on this 2010 Honda Accord we're going to be test fitting the Rhino-Rack Mountain Trail Rooftop Bike Rack, part number: RBC035. We all ready have a bike installed on the rack, let's go and take a closer look and show off some of the features. How this is actually gripped to the rack has no frame contact at all. Instead, we have two points of contact. We have this wheel strap at the back and this fork mount at the front with a skewer. How this grips it is, just open it up, grips it by the bike's forks to hold it in place. We also have a lock at the end to ensure there is no theft or tampering of your bike itself.



Thule Roof Bike Racks Review - 2008 Honda Accord

Speaker: Today on our 2008 Honda Accord we're going to be test fitting the Thule Baseline Roof Mounted Bike Rack Part No. TH527. We'll begin our test fit by placing our rack on top of our vehicle. We went ahead and install the Thule Rapid Traverse Roof Rack System on our vehicle so that's where we're going to be test fitting this on today. We'll go ahead and bring the bar underneath up here and I'm going to loosen up this T knob here just a little bit. We'll open up both of these levers and that will give us a little bit more play with our T knob here. We'll slide that into place so we can go ahead and begin tightening it down. That way we can secure the rack to the bar.



Thule Sprint Roof Bike Racks Review - 2008 Honda Accord

Today on our 2008 Honda Accord, we're going to test fitting the Thule Sprint Roof Mounted Bike Rack part number TH528. We'll begin our test fit by placing our rack on top of our Roof Rack System. We went ahead and installed the Thule Rapid Traverse Roof Rack System on this vehicle. All right, let's begin our setup here. We'll go ahead and take the T, put it in the right position and then we'll tighten down the lever here in the back. It's easiest to start with this straight out and then once you get some tension on it, you can cam it over and use it for some leverage. Let's go ahead and work it with a little bit more leverage on here so it's easier to tighten up. Once you get that tightened down good, we can go ahead and move to the back. Now, the back is the same type of system so we'll go ahead and pull our T over these straps or rubber corded steel reinforced strap, so they're very strong but still really flexible. Work on getting this tightened down. This bike rack is made out of aluminum so it's nice and light, yet still very strong. All right, with that, our bike rack all secured into our Roof Rack System, we'll go ahead and open up the rear wheel strap here so we can load our bike up. This is a fork mounted system so our front bike is going to load on to this skewer. Go ahead and put our back wheel into the wheel cradle and get our forks mounted on to the skewer. Go ahead and loose this up.



Swagman Upright Roof Bike Racks Review - 2008 Honda Accord

Today on our 2008 Honda Accord, we're going to be test fitting the Swagman Upright Roof Mounted Bike Rack, part number S64720. We'll begin our test fit by placing our bike rack on top of the vehicle. Today we're going to be doing our test fit on the Thule Rapid Traverse Aero Bar system. We'll go ahead and get this centered on the bar and we'll grab my hardware here. The system comes with two U-bolts that we're going to be using on the front to secure it down. We're going to take it underneath the bar, line up our holes and then we'll use the wing nuts to get it tightened down. Get it started on both sides.



Swagman Fork Down Roof Bike Racks Review - 2008 Honda Accord

Today on our 2008 Honda Accord, we're going to be test fitting the Swagman Fork Down Roof Mounted Bike Rack, part number S64710. We'll begin our test fit by placing our rack on top of our vehicle. We're going to go ahead and position the plate center over our roof rack. Today we're test fitting this on Thule Rapid Traverse Roof Rack system that we already have installed on our vehicle. Now the rack comes with U-bolts that you're going to use to secure it into place. We'll go ahead and put the U-bolt underneath our bar, line it up in the correct position and attach the wing knobs on top. Go ahead and get those started on either side.



Rhino Rack MountainTrail Roof Bike Racks Review - 2008 Honda Accord

Today, on our 2008 Honda Accord, we're going to be test-fitting the Rhino-Rack Mountain Trail rooftop bike rack. Part number RBC035. We'll begin our test fit by placing our rack on top of our vehicle. We went ahead installed the Thule Rapid traverse roof rack system on our Honda Accord. Go ahead and remove the lid . And then get our T slats into position. With those in position, we'll go ahead and take our Allen wrench and tighten them down.



Kuat TRIO Roof Bike Racks Review - 2008 Honda Accord

Today on our 2008 Honda Accord, were going to be test-fitting the Kuat Trio roof mounted bike rack, part number TR02.Well begin our test-fit by placing our rack on top of our vehicle. Now, we went ahead and install the Thule Rapid Traverse Roof Rack Systems, so thats what well be test-fitting it on today.Well go ahead and line our pad up here over the top of AeroBlade. Now this rack includes two U bolts and four cylinder nuts. The cylinder nuts have one end that that is threaded, and the other end has a hex head that fits your Allen key. You want to put those in the four slots with the hex side up.I want to go ahead and grab a stool here. You might want to have one nearby.



Thule Big Mouth Roof Bike Rack Review - 2006 Honda Accord

Today on our 2006 Honda Accord we'll be test fitting the Thule Big Mouth Roof Mounted Bike Rack, part number th599xtr. With the Thule Traverse Roof Rack System on our vehicle we'll begin our test fit by placing the Big Mouth directly onto our load bars. Here at the front we'll bring our brackets around our front bar, fit the T-bolts through the slots and tighten with the wing nuts on the top. We'll do this for both sides at the front of our carrier. At the rear we'll remove one of the wing nuts and bring our bolts around our rear bar. We'll drop it through the bracket and secure it by tightening down each wing nut.



Thule Big Mouth Roof Bike Rack Review - 2010 Honda Accord

Today on our 2010 Honda Accord, we'll be test fitting the Thule Big Mouth Roof Mounted Bike Rack, part number TH599XTR. With the Thule Square Bar Roof Rack System assembled onto our vehicle, we'll begin our test fit by placing the Big Mouth directly onto our crossbars. We'll open up the front bracket and make sure that the clamps go around our front bar. When we have the T-bar set back into the slot, we can tighten the wing nut sitting on top of the platform. We'll do this for both sides. We'll measure the rear and undo both wing nuts and remove the bracket.



RockyMounts TieRod Roof Bike Rack Review - 2012 Honda Accord

Today on our 2012 Honda Accord, well be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part #RKY1014. Now, to begin our test fit, our vehicle is already equipped with a roof rack system. Well place our bike rack on top of the roof rack, making sure that the head of the bike rack is directly over the front crossbar. Well also need to make sure that the rubber-coated steel straps are underneath the front crossbar. We can then bring them around, and after removing the cover from the head of the bike rack, well clip them into place. Well then move to the rear crossbar, where well put the clamp from the bike rack around the rear crossbar and secure it using the wing nuts included with the bike rack.





Honda Accord Roof Cargo Carrier Videos

Thule Force Medium Rooftop Cargo Box Review - 2006 Honda Accord

Today on our 2006 Honda Accord,we'll be test fitting the Thule Force Medium Rooftop Cargo Box measuring with 14 cubic feet in Aero Skin black, part number TH624. With the Thule Rapid Traverse roof rack system assembled onto our vehicle, we'll begin our test fit by placing our Thule Force directly onto our load bars. With the feet hanging out at the bottom of the box, we can adjust them as necessary to fit around the load bars. Once we have it situated, we can then open the passenger side of the box and tighten the two hand knobs on this side to tighten our feet around our bars. One of the greatfeatures of the Thule Force is its ability to open from either side of the vehicle. We'll move to the driver's side, open the box, and tighten the two remaining feet.



Thule Sonic XXL Rooftop Cargo Box Review - 2006 Honda Accord

Today on our 2006 Honda Accord, we'll be test fitting the Thule Sonic XXL rooftop cargo box, part number TH636S. This box measures in at 22 cubic feet, and is in metallic silver. With the Thule Rapid Traverse roof rack system assembled onto our vehicle, we'll begin our test fit by placing the Sonic directly onto our load bars. Since the feet are hanging out of the bottom of the box, we can adjust them as necessary to fit around our bars. Once we have it situated, we can open the passenger side of the box and tighten the two hand knobs on this side to tighten our feet around our bars. One of the great things about this box is that when the feet are tight enough around the bar, the hand knob will make a clicking or ratcheting sound.



Thule Sonic Medium Rooftop Cargo Box Review - 2006 Honda Accord

Today on our 2006 Honda Accord, we'll be test fitting the Thule Sonic Medium rooftop cargo box, measuring 13 cubic feet, in glossy black, part number TH634B. With the Thule Rapid Traverse roof rack system assembled onto our vehicle, we'll begin our test fit by placing the Sonic directly onto our load bars. With the feet hanging out of the bottom of the box, we can adjust them as necessary to fit around each load bar. With the box placed the way we like, we can then open the passenger side of the box and tighten the two hand knobs on this side to tighten our feet around our bars. One of the great features of this box is that when the feet are tight, they make a clicking or ratcheting sound to let you know. Another great feature of this box is its ability to open from either side of the vehicle.



Thule Pulse Alpine Rooftop Cargo Box Review - 2006 Honda Accord

Today on our 2006 Honda Accord, we'll be test fitting the Thule Pulse Alpine rooftop cargo box, measuring 11 cubic feet, in matte black, part number TH613. With the Thule Rapid Traverse roof rack system assembled onto our vehicle, we'll begin our test fit by placing the Pulse Alpine directly onto our load bars. Please keep in mind that this box opens from one side, so for our video we'll be setting it towards the passenger side for easier accessibility. We'll open the box and place our feet through the appropriate slots, making sure that they go around our load bars. Then we can use the attached hand knobs to tighten each one around our bar. With all four feet tight, our box is secured to our roof rack, and we're ready to go.



Thule Force XXL Rooftop Cargo Box Review - 2006 Honda Accord

Today on our 2006 Honda Accord well be test fitting the Thule Force XXL rooftop cargo box measuring 21 cubic feet in aeroskin black, part number th626. With a Thule Rapid Traverse roof rack system assembled onto our vehicle, well begin our test fit by placing the Thule Force directly onto our load bars. With the feet hanging out of the bottom of the box we can adjust them as necessary to fit around each load bar. Once we have the box positioned, we can then open the passenger side of the box and tighten the two hand knobs on this side to tighten our feet around our bars. One of the great features of the Thule Force is its ability to open from either side of the vehicle. Well move to the drivers side, open the box and tighten the two remaining feet.



Thule Pulse Alpine Rooftop Cargo Box Review - 2010 Honda Accord

Today on our 2010 Honda Accord, we'll be test fitting the Thule Pulse Alpine rooftop cargo box, measuring 11 cubic feet, in matte black, part number TH613. With the Thule AeroBlade roof rack system assembled onto our vehicle, we'll begin our test fit by placing the Thule Pulse directly onto our load bars. Once we have it situated the way we like, we can then open the box, feed the feet through the appropriate slots, making sure they go around our load bars. We can then use the attached hand knobs to tighten each foot down. Once we have all four feet tight, we can then close the box we're ready to go. That completes today's test fit of the Thule Pulse Alpine rooftop cargo box, part number TH613, on our 2010 Honda Accord..



Thule Pulse Large Rooftop Cargo Box Review - 2010 Honda Accord

Today on our 2010 Honda Accord, we'll be test fitting the Thule Pulse Large rooftop cargo box, measuring 16 cubic feet, in matte black, part number TH615. With the Thule AeroBlade roof rack system assembled onto our vehicle, we'll begin our test fit by placing our Thule Pulse directly onto our load bars. Once we have it situated the way we like, we can then open the box, take the feet, and fit them through the appropriate slots, making sure they go around our load bars. As we put them through, we'll use the hand knob to tighten each one down. With all four feet tight, our box is loaded and we're ready to go. That completes today's test fit of the Thule Pulse Large rooftop cargo box, part number TH615, on our 2010 Honda Accord.



Thule MOAB Roof Top Cargo Basket Review - 2012 Honda Accord

Today on our 2012 Honda Accord, well be test fitting the Thule M.O.A.B. Roof Top Cargo Carrier, part #TH690. Now, weve already preset our basket to accommodate our crossbar spread, so were ready to fit it to the vehicle. Well place the basket on top of the crossbar, making sure that the mounting plates are directly over the top of both crossbars. Well then use the included hardware that comes with the M.O.A.B. to clamp it to both crossbars.





Honda Accord Watersport Carriers Videos

Thule SUP Taxi Stand-Up Paddleboard Carrier Review - 2012 Honda Accord

Today on our 2012 Honda Accord, well be test fitting part #TH810. This is the Thule SUP Taxi Standup Paddleboard Carrier. Now, to begin our test fit, well place our front carrier on top of a front crossbar. Well then take the rubber-coated steel straps, wrap them underneath the crossbar, and bring them back up, securing them back to the foot of the carrier. We can then turn the gray knob, tightening down the strap, securing our carrier to the front crossbar. Well now place the rear carrier on top of the rear crossbar, again making sure that the rubber-coated steel straps run underneath the crossbar, where well reattach them on the other side.





Honda Accord Roof Rack Questions and Answers



Honda Accord Roof Bike Racks Questions and Answers



Honda Accord Watersport Carriers Questions and Answers