2021 Ford Bronco Vehicle Lights

Since you have a 400ah lithium battery bank the best option is going to be the Redarc In-Vehicle BCDC Battery Charger #331-BCDC1240D. This DC to DC charger works with 12V or 24V vehicle systems with standard or smart alternators and is compatible…

Hi John; we have two options from TorkLift for your 2025 Sierra 2500 with a 6-3/4' bed and factory hitch. You can choose from the following: -TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL86NR (powder coated steel) -TorkLift Tie…

According to my research we do have a few options that will work as a replacement for your E333645 LED light: Cool White - 180 Lumens/5,500 Kelvin #DI56VR - 165 Lumens/5,500 Kelvin #DI86VR Warm White - 180 Lumens/3,500 Kelvin #DI29VR - 165…

Hi Tami, Great question! You can definitely replace the bulb in your Optronics tail light, part #ST90RB, with a brighter option. The bulb that's currently in your light is a standard 1157. You can swap that out for an LED, like part #ARC63FR.…

Hey Edgar, first of all congrats on the new car, those Carnival's look really cool! For a harness with an install video, you will want the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #CU94FR and check out the…

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

I'm not quite sure how your camera is blocking you from installing a 60" tailgate light bar, but we do have some solutions from Putco that plug into the back side of the factory 7-way using the Replacement Quick Connect Wiring Harness for…

Hey Jack! First of all, congrats and the soon to be new travel trailer! Ideally the correct WDS is going to put your trailer's tongue weight right around the middle. It looks like your trailer comes in at 9,630 lbs, so if we figure 15% of that…

We do offer teardrop style clearance lights in red, the Pacer Performance Hi-Five Truck Cab Light Kit part #PP20-215 which are sold as a set of five. These lights by law must be installed so that they face the rear of your vehicle. They come with the…

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

I reviewed all of our trailer wheel bolt inventory and did not have a match for your request. I also contacted our suppliers and was not able to make a match there. The bolts I found were not 13 threads per inch coarse, nor left-handed. I suspect you…

Hey Gary, the lower fascia under the bumper of your 2025 Honda CR-V Hybrid Sport does get trimmed to install the Draw Tite hitch part #DT79MR but the bumper itself does not get trimmed or modified. The picture I attached shows what gets trimmed.