Videos
for GMC Acadia Owners
Help Articles
for GMC Acadia Owners
Expert Answers
for GMC Acadia Owners
Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…
view full answer...Unfortunately, it is not Mike but I've got a better option that will work with electric over hydraulic brakes. For your 2023 GMC Sierra 3500, I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness item #RED52VR. This…
view full answer...Thank you for the information! It sounds like your 2020 Toyota 4Runner TRD Pro has the raised rails and OEM crossbar setup that we'd find on the standard 2020 Toyota 4Runner. This has very low clearance under the factory crossbars so it's…
view full answer...Hey Dominic. Since you have the AT4 model of the 2021 GMC Acadia you'll need the Draw-Tite Hitch item #76023. This hitch is custom fit for your Acadia and bolts to it with included hardware. It's going to mount behind your rear bumper cover…
view full answer...For your Karrite Explorer, we do not have just the u-bolt and plastic nut replacements. We do have the Replacement Hardware Kit #SR05587 which will fit your roof box so that is my recommendation. This is a full kit but it is nice to have spare parts…
view full answer...Good question and we can definitely get you set up with the better option between the Curt Trailer Hitch Receiver #C13293 and the Draw-Tite Trailer Hitch Receiver #76023. There are a few important differences to take note of, which is their…
view full answer...Your 2021 GMC Acadia with the factory tow package does have the needed wiring so you can install the Tekonsha Primus IQ Trailer Brake Controller #TK90160. It isn't a plug-and-play option so you'll just need to connect the wires that are…
view full answer...We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…
view full answer...Congrats on the new vehicle. To tow your Sea Ray Boat with your 2019 GMC Acadia SLT you will need a hitch receiver, wiring harness with a 7-way connector, a brake controller, and a ball mount with a 2" ball. Let's start out with your hitch.…
view full answer...Yes, there is a hitch for your 2023 GMC Acadia AT4 that mounts behind your rear bumper. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item #76023.This hitch is custom fit and bolts to your GMC with included hardware. I really like the…
view full answer...The reinstall the rear cover on your 2021 GMC Acadia you will need to trim the cover for the Draw-Tite Max-Frame Trailer Hitch Receiver #76023. A 3" x 1-1/2" section must be removed for the cover to mount, I have included a picture of this.…
view full answer...I have another option for you, but the etrailer Trailer Hitch Receiver #e98865 you were looking at is designed to fit the 2005 - 2017 Chevrolet Equinox, 2010 - 2017 GMC Terrain, 2006 - 2009 Pontiac Torrent, 2002 - 2007 Saturn Vue, and will not fit…
view full answer...






















