Recommended Hidden Hitch for a 2023 GMC Acadia AT4

Question

Question:

Is there a hitch that mounts behind the bumper cover for the 2023 GMC Acadia? I have the AT4 model. I want the hitch to be hidden when I am not using it.

asked by: Stu

0

Expert Reply:

Yes, there is a hitch for your 2023 GMC Acadia AT4 that mounts behind your rear bumper. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item # 76023.This hitch is custom fit and bolts to your GMC with included hardware.

I really like the Draw-Tite hitch because it installs behind your rear bumper cover and can be completely hidden when you are not towing.

The Draw-Tite Max-Frame Trailer Hitch Receiver item # 76023 is a class III hitch with a 2" receiver and weighs 32 lbs. It has a 4,500 lbs towing capacity, and a 675 lbs maximum tongue weight. It can be used with a weight distribution system.

I have linked a couple of pictures below along with an installation video so you can see what this hitch looks like when installed.

If you are planning on towing you will also need a wiring harness item # 118720 for a 4-Way or item # 118276 for a 7-Way and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Draw-Tite Max-Frame Trailer Hitch Receiver item # 76023 GMC Acadia
(click to enlarge)

Answer 1

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Recommended Hidden Hitch for a 2023 GMC Acadia AT4

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching