Hey Steven, thanks for reaching out. It may be possible to add brakes to your trailer. The first thing you will want to verify is that your axle has a brake flange. It should look something like part #4-35. If no brake flange is present, they can be…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
If the rear panel on your Extang Solid Fold 2.0, like part #EX83475, came off and it is still in good condition then you can follow the instructions in the linked photo to reinstall it. If the rear panel is not in good condition then let me know the…
Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…
Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long #Y02-480B-NT will work well, or you can piece together the parts you…
If the bolt won't go in the weld nut of the Curt Trailer Hitch Receiver #C13377, the issue is almost certainly that the weld nuts are dirty and thus stopping the bolt from catching. What you'll want to do is clean the weld nut with a brush…
We get this question quite a bit and the issue is really that the threads end up with quite a bit of corrosion and dirt which prevents the bolt from threading in. I attached a couple help articles that cover cleaning out weld nuts for you to check…
Adding a brake controller to your 2013 Nissan Frontier that already has a working 4-pole flat trailer connector is a simple process that requires only two parts. First you will need a brake controller installation kit, part #ETBC7. This kit includes…
Hello Mike. It sounds like you are wanting to add electric brakes to your boat trailer that currently has no brakes. This is possible, but you will first need to make sure that your axle is equipped with a brake flange at the base of the spindle. The…
I spoke with my contact at Extang and they send me a set of install instructions that cover the installation and removal of the rear section of the Extang Solid Fold 2.0 which I attached to this page.
We do have what you need available. I was able to locate the LC175226 controller but it is no longer available. I contacted the manufacturer and they provided information for the correct replacement part. The correct replacement part is the…
