Custom Fit 2011 Toyota FJ Cruiser Accessories

There is a trailer coupler designed specifically to be used for offroading, from Lock N Roll. This uses an articulating connection between the coupler and accompanying hitch mount that gives a full 360 degree rotation between the two. So the trailer…

Good question, and the hitch on your Audi is not rated for use with weight distribution, so what I recommend instead is a friction sway control set up. This will provide you with better control over your trailer to give you a much more controlled,…

To convert your 4-way to a 7-way so that you can install a brake controller in your 2013 Toyota FJ Cruiser will require the kit part #ETBC7. For a brake controller I would recommend the Prodigy P3 Brake Controller part #90195. This is our best…

I spoke with my contact at Curt on whether or not the Front Mount Trailer Hitch Receiver, #31367, can be installed on your 2008 Toyota FJ Cruiser with the grille guard in place. While he did not have any notes stated that it would not fit the Trail…

The Curt Front Hitch for the 2008 FJ Cruiser , item #31367, and the setup you are describing should work well, as long as the multi mount you are referring to is designed to fit into a 2 inch receiver. If you already have the winch but not the hitch…

I will be happy to help you out. The Thule Hullavator kayak carrier, #TH898, needs to be mounted on crossbars that extend beyond the side rails or foot pack. It will not fit any other way. So to add compatible crossbars to your 2014 Toyota FJ Cruiser…

For your 2018 Honda HR-V to be compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898, you have to use slightly longer crossbars. The Hullavator requires 4-8 inches overhang to give clearance. In order to give…

On each individual electric brake magnet the amperage draw would be 3.0 to 3.2 max amps at 12 to 13 volts on 7-inch brake magnets and 3.2 to 4.0 max amps at 12 to 13 volts on 10 and 12-inch brake magnets. The max amperage draw for the brake magnets…

The Tekonsha P3 Brake Controller #90195 that you referenced is one of the best brake controllers on the market, not only does it perform well as one of the best proportional brake controllers on the market, but it has one of the best diagnostic…

Directions? Pffft! We'll do you one better....How about an install video? Take a look at the link I provided, you can see our technicians installing a different brake controller on a 2013 FJ Cruiser. Even though the model year is different and…

Our scissor jacks should not be used to lift a car to replace a spare tire as they were not designed for that application. Instead, depending on how far you need to lift, you may be able to use the Powerbuilt Unijack #ALL620470, which can lift up to…