Custom Fit 2002 GMC Sierra Accessories

For your 20 Foot Outback Enclosed Trailer, the Reese Friction Sway Control Kit - Economy #83660 will use friction to minimize the movement by basically sandwiching the moving bar. This will allow for turning to still happen without issue, but will…

In order to install the RBW Lil Rocker 15K 5th Wheel Trailer Hitch on your 2002 Ford F-250 you will want to use either the Reese Quick-Install Custom Installation Kit part #RP50082-58 which is a no-drill option or the Reese Universal Base Rails and…

The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #HSSF are not ideal if the camper won't be resting on them. The amount of torque if the camper is not resting on them may cause them to deform or the bed…

I'm pretty sure that's to wire up a third brake light on a camper shell. To know for sure, take a circuit tester, like our part #PTW2993, and test that wire while applying the truck's brakes. If I'm correct…

For a 2002 Chevy Silverado you can use the K-Source Custom Extendable Towing Mirrors - Manual - Black – Pair #KS62073-74G. Additional features on factory mirrors (like power adjustment, turn signals, automatic dim, memory, puddle lights, etc.) are…

The K-Source Custom Extendable Towing Mirrors #KS62073-74G that you referenced are confirmed to fit your 2000 GMC Sierra but they are manual mirrors. If you have electric mirrors you would like to retain the function of we have a couple options. I…

I have a solution for you, but we're not going to have any replacement or towing mirrors with all of those functions available for your 2002 Chevy Silverado 2500 HD with a crew cab. With that said, there are a few different types of mirrors…

The distance from the top of the mounting flange or bottom of the truck frame is to the top of the receiver tube on the Curt Trailer Hitch Receiver part #C15312 is 5-5/8".

I went out into our warehouse and measured both the Curt Hitches you referenced #C15312 and #C15313. THe #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches.

If your 2002 Chevy Silverado 3500 features the standard factory rear bumper (and not a 10 inch deep drop bumper) then the correct Curt hitch is the Class V #C15312 that you referenced. I have attached an image that shows the difference between a…

Both of the Curt hitch receivers have the same bolt hole measurements. It's 9 inches from the first hole (Closest to the front of the truck) to the second hole and 5-1/2 inches from the second to the third. There's 39 inches across from hole…

You can use a pulley block like part #BDW20005, to pull your car on to a trailer with the winch being offset. You will want to make sure the winch is well secured for safety. This pulley block has a capacity of 17,000 lbs break strength and is…