See what our Experts say about this Inno Accessories and Parts

• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Why Are My Malone Crossbars Whistling When I Drive
  Hello Michele. I am sorry to hear that the crossbars that you ordered for your son are making a whistling noise, this noise can be rather annoying. On any kind of crossbar if there is a gap for air to get it in it will cause a whistling noise. I suggest that he looks over the Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 50" Long - Silver # MPG215 very closely to see if there is any kind of gap in the rubber stripping, or if there is an end cap lose or missing....
  view full answer...
• What Roof Rack Fairing Fits on Thule Wingbar Evo Crossbars
  While we have a fairing solution that fits the Thule Wingbars the Thule fairings do not fit since the bar dimensions are slightly different. Instead you'd want one of these fairings as they fit most styles of crossbars. So for a 40 inch fairing we have part # INA261, 44 inch part # RRRF3, 48 inch # INA262, and 31 inch part # INA260. You want to go with a fairing that best fits the distance between the feet of the rack you have for best wind noise reduction!
  view full answer...
• Wind Fairing for SportRack Roof Rack on 2011 Chevy Impala
  I would love to help you out, and thanks for being so polite! The only issue is that the Sportrack # SR1010 has different fits for different vehicles so I would need to know the distance from inside to inside of the rack's feet. Basically, how far apart are they across your Impala's roof? If you could let me know I'd be happy to find you the right fairing.
  view full answer...
  
• How to Reduce Wind Noise With Inno Aero Crossbars That Are 48 & 51 Inches Long
  While there is a solution for you to reduce the wind noise, in regards to aero bars generating less wind noise, the amount honestly depends on which crossbars. Some crossbars are manufactured with added strips on the top channels that disrupt the wind (and therefore whistling) more than others, and the Inno aero bars like your # INXB123-130 don't have that. So the best option to help reduce that amount of wind noise is with a fairing, and for your 48" and 51" long crossbars, the best...
  view full answer...
• How to Pick Out Roof Rack Fairing to Cut Down on Wind Noise
  The best way to pick out a fairing is to measure the distance between the feet of the roof rack and go with a fairing length that best matches that distance. The Inno fairings are designed to fit most crossbar shapes so those will be your best option. For that we have the # INA260 for a 31 inch fairing, part # INA261 for a 40 inch fairing, or # INA262 for a 48 inch long fairing.
  view full answer...
• Solution for Wind Noise with the Malone Roof Rack part # MPG201
  Roof racks can add some wind noise. Luckily there is a solution for that. If you install a wind fairing you'll direct the air over the bars and the noise will go away. For a fairing to use with the Malone roof rack part # MPG201 the part # INA261 would be what you need. You can also try moving the bars further back on your rack to see if that helps too.
  view full answer...
• How to Pick Out Roof Rack Fairing from Yakima
  When picking out a fairing for a roof rack the best way to do it is to measure the distance between the feet of the rack and go with the fairing that matches that distance the best. We can't stop you from ordering any size you want though. We have the part # RRRF3 which measures 44 inches long, the part # INA261 which is 40 inches, # INA262 which is 48 and # INA260 which is 31 inches. The great thing about these fairings is that their hardware can fit most crossbar shapes.
  view full answer...
• Roof Rack Fit For 2013 Honda Crosstour
  I was able to find a roof rack that fits your 2013 Honda Crosstour, and in fact there are two, both from Inno. One is an aero bar roof rack and the other is a square bar rack. I'll list out the options for both, and I did verify these fits directly with the manufacturer for you. Aero Crossbar Roof Rack - Inno Aero Crossbars # INXB123-130 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit # INK587 Square Crossbar Roof Rack - Inno Square Crossbars # INB127 - Inno Feet for...
  view full answer...
• Can the Fairing be Installed with the Logo Facing In or Can the Logo be Removed on an Inno Fairing?
  Yes, the graphic on the Inno Fairing # INA261 is just a sticker and can be removed. You may want to use a goo gone type product to clear up any residue left on the fairing after removal. You will not be able to mount the fairing with the logo facing in because the feet with the rubber pads are already pre-installed.
  view full answer...
• Recommended Wind Fairing For Rola 59766 Roof Rack
  Adding a wind fairing to your roof rack is always a great idea, not only to reduce wind noise, but to help improve aerodynamics and gas mileage by reducing drag. The cross bars on the Rola Sport Series Roof Rack 59766 are 47" long and there is approximately 40" between the mounting feet on the rack, so you'll want a wind fairing around 40" long. I recommend going with the Inno Fairing for Roof Racks - 40" Long # INA261, which is black in color and will fit perfectly on your crossbars....
  view full answer...
• Fairing Recommendation to Fit SeaSucker Roof Rack 40 inch Roof Rack # 298-SX6000B
  Yes, you can install a fairing on the SeaSucker roof rack part # 298-SX6000B that you referenced. Inno fairings are great in that they can fit most types of crossbars so the part # INA261 would be the kit to use. This is a 40 inch long fairing which would be great for the 48 inch bars of this roof rack.
  view full answer...
• Will Yakima LoadStops Work With SeaSucker Monkey Bars and Wind Fairing for SeaSucker
  The Yakima LoadStop Brackets for Yakima Roof Rack Crossbars # Y05000 are designed to work with the 1-1/8" diameter Yakima round bars like part # Y00408 and the SeaSucker Monkey Bars Roof Rack - 48" Long # 298-SX6000B are 1-1/4" diameter so they aren't going to be a good fit. Due to the way the brackets attach you may be able to physically get them around the SeaSucker bars but being able to tightly secure them will be an issue. In regards to a wind fairing, there are fairings that will...
  view full answer...
  
• Wind Fairing for Factory Crossbars on 2014 Mini Cooper Countryman
  Although we do not have the dimensions for factory crossbars available I can tell you exactly how to find out if the Inno wind fairings will fit your 2014 Mini Cooper Countryman. You will simply need to measure the length and width of the bars and if they are a maximum of 1" tall x 3-1/2" wide x 1-1/8" diameter you can use the Inno fairing. If your crossbars are taller than 1" you can use the Large Crossbar Adapter Bolts for Inno Fairings # INISF717, which measure 2-3/4" and can be used...
  view full answer...
  
• Wind Deflector Options For A Thule Tepui Explorer Kukenam 3 Rooftop Tent
  While there currently any wind deflectors specifically designed for a rooftop tent, like your Thule Tepui Explorer Kukenam 3 Rooftop Tent # TH8001KSK04, there are deflectors for the roof rack like the Inno Fairing for Roof Racks # INA261 that can help a bit with wind resistance. This specific deflector has a clamp-on design for easy installation and removal. It can fit crossbars a maximum of 1" tall x 3-1/2" wide x 1-1/8" diameter, but also has an adapter kit # INISF717 for taller crossbars.
  view full answer...
• Can Roof Rack Wind Fairings Withstand Automated Car Washes
  Truthfully no roof rack fairing is meant to withstand the environment of an automated carwash. One may hold up to an occasional trip through one but this exposure presents a degree of mechanical stress that is outside what fairing makers will consider normal use. If the wife likes to keep her car clean with a weekly trip to the automated carwash then I do not recommend installing a fairing. Regularly hand-washing a fairing like # INA261 is perfectly fine.
  view full answer...
• Wind Fairing Recommendation for 2019 Subaru WRX with Rhino Rack RS 2500 Roof Rack
  To determine the best fairing for your application you want to measure the front crossbar between the towers. The fairing should fill that space without going past the roof line where it would start to create its own drag versus reducing the drag of the roof rack. Because you have the 2019 WRX, the RS2500 has a front Crossbar that is 39-1/2 inches long so I recommend the Inno Fairing for Roof Racks - 40" Long # INA261 for you. This will be the best size for your vehicle. I've linked...
  view full answer...
• Yakima Roof Rack and Wind Fairing for 2020 Subaru Legacy
  You are absolutely right; the Yakima roof rack that fits your 2020 Subaru Legacy sedan does attach to fixed mounting points on top of your car. I confirmed with Yakima that the correct parts for your '20 Legacy are: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 As for the fairing, the right size for this rack on your Subaru is the 40 inch Inno Fairing # INA261, which is not...
  view full answer...
• Recommended Wind Fairing for the Rola Roof Rack on a 2009 Subaru Forester
  If the distance between the two mounting feet of the Rola Roof Rack part # RBU47 are 41" apart while installed on your 2009 Subaru Forester then I recommend using the Inno Fairing for Roof Racks part # INA261. This wind fairing is 40" long and will fill the gap you have between your mounting feet better than any other option we have for you.
  view full answer...
• Recommended Fairing Length for Roof Rack on 2018 Toyota 4Runner
  The 40 inch Inno Roof Rack Fairing, part # INA261 is exactly what's recommended for a roof rack installed on your 2018 Toyota 4Runner. Inno's fairings are compatible with round crossbars, including your Yakima bars so the # INA261 fairing would work perfectly for you. If you click the provided link, you can see a product description video featuring the fairing.
  view full answer...
• Easiest To Install Roof Rack for a 2020 Honda Civic Sedan
  I do have an option for you in the SeaSucker Monkey Bars Roof Rack part # 298-SX6000B but as of July 2019 there are currently no custom fit options for a 2020 Honda Civic Sedan. That said, the above will actually be the best option for frequent off and on use as it will take considerably less time to remove/install when compared to a custom fit system. This roof rack has a 150 lb weight capacity but the custom fit systems for your Civic will limit you to 165 lbs. The vehicle's roof weight...
  view full answer...
• How to Reduce Wind Noise for Roof Rack on a 2018 Ford Escape
  There are a few different ways to help reduce the wind noise that you are hearing with the Malone SteelTop Roof Rack # MPG201 installed on your 2018 Ford Escape. The first solution is to use a fairing to help deflect the wind. For your Escape you will need a 40" length which I recommend the Inno Fairing # INA261 as it uses a very universal style mounting system that is easy to use. Attached is a review video for you to check out. The next best option is to use the Malone AirFlow2 Roof...
  view full answer...
• Recommendation to Reduce Wind Noise on a 2016 Volvo XC70 Roof Rack
  Roof rack fairings are designed to direct the air over the crossbars which allows wind noise you described to be greatly reduced. Inno fairings are designed to fit most crossbar designs so that would be your best option. For a 40 inch fairing we have the part # INA261 and then for a 31 inch fairing we have the # INA260. What you need to do is measure the distance between the feet of the crossbars and go with the fairing that best matches that dimension.
  view full answer...
• Where to Measure for Picking Out Fairing for Roof Rack
  The best length of fairing is the one that matches the closest to the distance between the feet of the roof rack you have. So the best option I have for you is to take that measurement and then determine which works best. For a 31 inch you'd want the part # INA260 or for 40 inch # INA261.
  view full answer...

Do you have a question about this Accessories and Part?