2010 Chevrolet Tahoe Nerf Bars - Running Boards

Features:

Get in and out of your vehicle with ease by using this rugged, aluminum alloy step. Diamond tread surface provides sure footing, and the black finish complements almost any application. Multi-Mount system ensures a precise, stable fit.

Installation Notes:

Drilling is required for installation

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Tech Tip:

Nerf Bars will not fit Z71 models or Hybrid models.

Features:

These rugged, steel running boards provide a 5-1/2" wide step for entering and exiting your vehicle. Integrated step pads blend steel with non-skid, poly tread. Black powder coat finish. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Features:

These rugged, all-steel running boards provide a 6-1/2" wide step for entering and exiting your vehicle. Raised steel treads offer superior traction in all weather conditions. Textured black powder coat. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

These 5" wide steps with rounded ends mount close to your vehicle for a streamlined look. Full-length plastic pads create non-skid surfaces. Constructed of rustproof aluminum with black stainless steel trim. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

These 5" wide steps with rounded ends mount close to your vehicle for a streamlined look. Full-length plastic pads create non-skid surfaces. Constructed of rustproof aluminum with polished stainless steel trim. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Tech Tip:

Nerf Bars will not fit Z71 models or Hybrid models.

Features:

These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

No drilling required for installation

A Gap Strip (# 27-9901) is recommended for this application

Tech Tip:

Application does not include Z71 or Hybrid models.

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of black powder coated steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Tech Tip:

Oval Tube Steps will not fit Z71 or Hybrid models.

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Polished stainless steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Tech Tip:

Oval Tube Steps will not fit Z71 or Hybrid models.

Features:

These straight-style step bars give your vehicle a rugged look. 5-1/2" Wide step pads have stamped-grid tread design for excellent traction. All-aluminum construction with chrome powder coat finish. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Tech Tip:

Step Bars will not fit Z71 or Hybrid models.

Features:

These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

No drilling required for installation

A Gap Strip (# 27-9901) is recommended for this application

Tech Tip:

Application does not include Z71 or Hybrid models.

Features:

Get in and out of your vehicle with ease by using this rugged, aluminum alloy step. Diamond tread surface provides sure footing, and the polished finish complements almost any application. Multi-Mount system ensures a precise, stable fit.

Installation Notes:

Drilling is required for installation

Features:

Grated steel running boards have an extra-wide stepping surface with raised treads to prevent slipping when entering your truck. Serrated treads provide a rugged look and help keep mud and snow from getting in your cab. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Does not fit Z71 models

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Polished stainless steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Tech Tip:

Oval Tube Steps will not fit Z71 or Hybrid models.

Features:

These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

No drilling required for installation

A Gap Strip (# 27-9901) is recommended for this application

Tech Tip:

Application does not include Z71 or Hybrid models.

Features:

The aluminum bases of these step boards are covered in black molded polymer for sure footing. Each board sits close to your vehicle's frame for a streamlined look. Custom mounting kit included.

Installation Notes:

No drilling required for installation

A Gap Strip (# 27-9901) is recommended for this application

Tech Tip:

Application does not include Z71 or Hybrid models.

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Tech Tip:

Product will not fit Z71 or Hybrid models.

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Black powder coated steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Tech Tip:

Oval Tube Steps will not fit Z71 or Hybrid models.

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Tech Tip:

Oval Tube Steps will not fit Z71 or Hybrid models.

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of black powder coated steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Tech Tip:

Oval Tube Steps will not fit Z71 or Hybrid models.

Features:

These straight-style step bars give your vehicle a rugged look. 5-1/2" Wide step pads have stamped-grid tread design for excellent traction. All-aluminum construction with black powder coat finish. Custom installation kit included.

Installation Notes:

No drilling required for installation

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Black powder coated steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Tech Tip:

Oval Tube Steps will not fit Z71 or Hybrid models.

Features:

The aluminum bases of these step boards are covered in molded polymer for sure footing. Integrated light assemblies turn on when doors are open. Boards sit close to your vehicle's frame for a streamlined look. Custom mounting kit included.

Installation Notes:

No drilling required for installation

A Gap Strip (# 27-9901) is recommended for this application

Tech Tip:

Application does not include Z71 or Hybrid models.

Features:

Get in and out of your vehicle easily with these 6" oval side bars. Extra-wide, non-slip step pads provide sure footing for all passengers. Semi-gloss black powder coated aluminum is durable and rust resistant. Custom installation kit included.

Installation Notes:

No drilling required for installation

Designed for vehicles with Gasoline Engine only

Features:

Get in and out of your vehicle easily with these 6" oval side bars. Extra-wide, non-slip step pads provide sure footing for all passengers. Polished stainless steel is extremely resistant to rust and corrosion. Custom installation kit included.

Installation Notes:

No drilling required for installation