Filter ResultsTow Bar Base Plate Specs:
Base Plate Features:
Installation Notes:
Installation requires some minor drilling
Be sure to confirm the weight of your individual vehicle before towing. Some models, depending on options and lead, may exceed the weight rating of specific tow bars. Always ensure both your tow bar and hitch are adequately rated for the vehicle’s overall weight
Check towability with manufacturer.
Early 99's were produced with the same body style as the 98's, then later models have the new styling. The new style chassis has amber rear turn signals instead of red
Height deviation up to 4" higher on the towing vehicle allowed when used for utility applications only with an Allure towbar
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Installation Notes:
Installation requires some minor drilling
Be sure to confirm the weight of your individual vehicle before towing. Some models, depending on options and lead, may exceed the weight rating of specific tow bars. Always ensure both your tow bar and hitch are adequately rated for the vehicle’s overall weight
Check towability with manufacturer.
Height deviation up to 4" higher on the towing vehicle allowed when used for utility applications only with an Allure towbar
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Installation Notes:
Installation requires some minor drilling
Be sure to confirm the weight of your individual vehicle before towing. Some models, depending on options and lead, may exceed the weight rating of specific tow bars. Always ensure both your tow bar and hitch are adequately rated for the vehicle’s overall weight
Check towability with manufacturer.
Height deviation up to 4" higher on the towing vehicle allowed when used for utility applications only with an Allure towbar
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Installation Notes:
Installation requires some minor drilling
Be sure to confirm the weight of your individual vehicle before towing. Some models, depending on options and lead, may exceed the weight rating of specific tow bars. Always ensure both your tow bar and hitch are adequately rated for the vehicle’s overall weight
Check towability with manufacturer.
Early 99's were produced with the same body style as the 98's, then later models have the new styling. The new style chassis has amber rear turn signals instead of red
Height deviation up to 4" higher on the towing vehicle allowed when used for utility applications only with an Allure towbar
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Installation Notes:
Tow hooks, if present, will be permanently removed
Drilling required for installation
Tech Tip:
Frame hole measurement is not required for Demco products.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Installation Notes:
Tow hooks, if present, will be permanently removed
Drilling required for installation
Tech Tip:
Frame hole measurement is not required for Demco products.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Installation Notes:
Tow hooks, if present, will be permanently removed
Drilling required for installation
Tech Tip:
Frame hole measurement is not required for Demco products.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted internally to the frame rail.
Tech Tip:
Product is designed for models that use a torsion bar for the front suspension.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted internally to the frame rail.
Tech Tip:
Product is designed for models that use a torsion bar for the front suspension.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted internally to the frame rail.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted internally to the frame rail.
Tech Tip:
Product is designed for models that use a torsion bar for the front suspension.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted internally to the frame rail.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 3" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 3" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted internally to the frame rail.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted internally to the frame rail.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >Tow Bar Base Plate Specs:
Base Plate Features:
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Installation Notes:
Designed for vehicles where tow hooks are bolted externally to the bottom of the frame as well as have a 1-1/4" measurement as referred to in the tech tip.
Tech Tip:
Must measure holes on bottom and side of frame for correct bracket. This bracket requires 1-1/4" between holes. See diagram on bracket product page for locations of holes to be used.
More Information >
