2013 Ford F-150 Truck Tailgate Lock

Hey Robert, to install the Pop & Lock Valet Conversion Kit for Tailgate Locks #PL5500CONV that you referenced is going to take a little less than an hour. Some get it done in around 30 minutes though.

If the locking mechanism of the Pop and Lock Powered Tailgate Lock, #PAL8320, fails, the only way to unlock the tailgate is to break into the tailgate to remove the lock. I spoke with my contact at Pop and Lock and he said most lock smiths can do…

Yes, the Replacement Lock Core for Pop & Lock Tailgate Lock #PL5400CONV for the Pop & Lock Custom Locking Tailgate Handle - Manual #PAL5500 will work great with your 2012 Toyota Tacoma TRD Sport with a backup camera. If you check out the…

Pop & Lock Custom Tailgate Lock for Steel Tailgate Handle - Manual - Black #PAL2300 does install under your Ford Ranger's steel OEM handle. Installation will require disassembling your tailgate, but it is a very easy install. I've…

Yes, the Pop and Lock Tailgate Lock part #PAL5411 that you referenced does still allow the backup camera that mounts in the OEM handle to still function as it has a cut out for that to fit into.

For your 2009 Dodge Ram 1500 we have two option styles for a tailgate lock. We have the electric power lock style part #PAL8350 that will lock the handle of the manual style part #PAL9900 that locks the tailgate to the truck. If the goal is to lock…

The Pop & Lock Custom Tailgate Handle with Lock #PAL5400 that you referenced is confirmed as a fit for all models of the 2005 Toyota Tacoma so it would work well for you. This one will key to your truck door key so that the same key will open the…

Hello Dean, thanks for reaching out. I do have a good option for you, although we do not have an exact match for the Atwood model R1737BB. Take a look at the GE Profile Propane RV Range #GE24VR. This is a 3 burner gas range with a stainless finish.…

Hello Kevin, thanks for reaching out. The Power Mountain Tallboy Off-Road Bottle Jack #PM34FR is not made here in the USA it is made overseas. The jack lifts from 8-1/2" to 37-3/4 to you will want to compare this to the frame of your truck to…

I have linked the installation instructions for the Pop & Lock Custom Tailgate Lock with Plug & Play T-Harness #PL34FR below. You will want to see page 7 to locate where the plug and play harness ties into the factory wiring behind the…

It is possible to combine a tailgate lock and a lock for a Leer camper shell. The best way to do this is to use the Pop & Lock Custom Tailgate Lock #PL34FR, which will work with the factory keyless entry system on your 2017 Toyota Tacoma. You can…

Yep you have the right harness, just the Pop and Lock harness #PL34FR has been updated allowing it to work with multiple years of the Toyota Tacoma which has added a few more connectors. You'll use the purple and grey wires if installing on the…