Jeep Spare Tire Carrier Specs:
Videos
for Jeep Spare Tire Carrier
Help Articles
for Jeep Spare Tire Carrier
Expert Answers
for Jeep Spare Tire Carrier
Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
view full answer...You are correct that the Jeep bracket should have been reinstalled when installing the Blue Ox Base Plate #BX1139. I have linked another video near the bottom of the page where you can see the brackets being reinstalled on a 2020 Jeep Wrangler…
view full answer...The Lippert Flow Max RV Toilet #LC67AF requires a minimum of 12" for the rough-in.
view full answer...Yes, the Roadmaster Spare Tire Carrier #RM-195125 can pivot to the left or right depending on what kind off clearance you have. We only show to the left in the video because there is a ladder on the right side, but if you check out the attached…
view full answer...We do have some replacement wheels that you can see with parts #AM20783, #LHHA420, and #TA56FR if you're only needing the wheel. Since this is on a motorhome you're actually going to need to look into regular vehicle tires if you need…
view full answer...There are two possible options for you. The Dexstar Dual Wheel #AM20790 which is the 16" x 6" size you need with the 8 on 6-1/2" bolt pattern, uses flange nuts instead of standard lug nuts, and would work with the 225/75R16…
view full answer...We have a number of spare tire carriers available from Roadmaster, Demco, and other manufacturers; However, Blue Ox does not build an option. If you are needing a spare tire carrier for your 2017 Jayco Redhawk Motorhome, may I suggest the…
view full answer...It depends on what 5th wheel landing gear you have. For example; the Lippert Landing Gear part #LC333966 is rated for 6,000 lbs. It can be used with a trailer that weighs more than 6,000 lbs because it is only supporting part of that load - the…
view full answer...For the 6-point Level-Up System by Lippert, I made a call to the manufacturer to ensure you would receive correct information. Lippert said that when you bolt the footpads to the jacks, you need to torque them to 132 ft-lb. They said to make sure…
view full answer...We do have a few different options for you! If you are wanting an exact replacement then it looks like you currently have the Command LED Courtesy Light #328-002-04W. For a few different styles we have the Optronics #ILL85CB and #ILL86CB which are…
view full answer...In order to add a 7 way connector on you 2020 Jeep Wrangler JL you'll need to start by adding a 4 way trailer connector like the Tekonsha #118786, which gives you the connections needed to install a 7 way connector. Once you've…
view full answer...I went out to our warehouse and measured an outer bore diameter of 2-1/4 inches on the etrailer.com Trailer Idler Hub Assembly #AKIHUB-545-2-G-2K that you referenced. The reason we don't typically list this dimension on our trailer hubs is…
view full answer...Filter Products (2)