Hub is designed for use on agricultural trailers without brakes. Fits 7,000-lb axles. Inner bearing (LM501349) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheelstuds, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (6) wheel nuts, and bearings are included Races and wheelstuds come pre-installed in hub Specs: Application: 7,000-lb trailer axles with agricultural spindles Use with TRP spindle # SP-356200-130 Weight capacity (at max 20 mph): 3,500 lbs Bolt pattern: 6 on 6" Pilot hole diameter: 4.62" Grease cap flange diameter: 2.44" Wheel offset: 1.12" Bearing, Race, and Seal Information Bearings (included) Inner bearing: LM501349 (1.625" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: LM501310 Outer race: LM67010 Grease seal (included): AG-GS-30662000SL Inner diameter: 2.000" Outer diameter: 3.066"
Hub is designed for use on agricultural trailers without brakes. Fits 7,000-lb axles. Inner bearing (JL69349) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheelstuds, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (6) wheel nuts, and bearings are included Races and wheelstuds come pre-installed in hub Specs: Application: 7,000-lb trailer axles with agricultural spindles Use with TRP spindle SP-888175-105, SP-888200-125, or SP-888200-140 Weight capacity (at max 20 mph): 3,560 lbs Bolt pattern: 6 on 6" Pilot hole diameter: 4.62" Grease cap flange diameter: 2.446" Wheel offset: 1.12" Bearing, Race, and Seal Information Bearings (included) Inner bearing: JL69349 (1.4961" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: JL69310 Outer race: LM67010 Grease seal (included): AG-GS-25661625SL Inner diameter: 1.625" Outer diameter: 2.566"
Hub is designed for use on agricultural trailers without brakes. Fits 11,500-lb axles. Inner bearing (3780) and race, outer bearing (2790) and race, grease seal, grease cap, wheelstuds, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (8) wheel nuts, and bearings are included Races and wheelstuds come pre-installed in hub Specs: Application: 11,500-lb trailer axles with agricultural spindles Use with TRP spindle # SP-819275-145 Weight capacity (at max 20 mph): 5,790 lbs Bolt pattern: 8 on 8" Pilot hole diameter: 6" Grease cap flange diameter: 3.16" Wheel offset: -1.50" Bearing, Race, and Seal Information Bearings (included) Inner bearing: 3780 (2.000" inner diameter) Outer bearing: 2790 (1.3125" inner diameter) Races (included) Inner race: 3720 Outer race: 2720 Grease seal (included): AG-GS-37562500SL Inner diameter: 2.500" Outer diameter: 3.756"
Hub is designed for use on agricultural trailers without brakes. Fits 15,000-lb axles. Inner bearing (387AS) and race, outer bearing (LM501349) and race, grease seal, grease cap, wheelstuds, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (8) wheel nuts, and bearings are included Races and wheelstuds come pre-installed in hub Specs: Application: 15,000-lb trailer axles with agricultural spindles Use with TRP spindle # SP-758300-160 Weight capacity (at max 20 mph): 7,500 lbs Bolt pattern: 8 on 8" Pilot hole diameter: 6" Grease cap flange diameter: 3.13" Wheel offset: -.38" Bearing, Race, and Seal Information Bearings (included) Inner bearing: 387AS (2.250" inner diameter) Outer bearing: LM501349 (1.625" inner diameter) Races (included) Inner race: 382A Outer race: LM-501310 Grease seal (included): AG-GS-40083000SL Inner diameter: 3.000" Outer diameter: 4.008"
Hub is designed for use on agricultural trailers without brakes. Fits 9,500-lb axles. Inner bearing (25590) and race, outer bearing (25877) and race, grease seal, grease cap, wheelstuds, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (8) wheel nuts, and bearings are included Races and wheelstuds come pre-installed in hub Specs: Application: 9,500-lb trailer axles with agricultural applications Use with TRP spindle # SP-778213-155 Weight capacity (at max 20 mph): 4,910 lbs Bolt pattern: 8 on 8" Pilot hole diameter: 6" Grease cap flange diameter: 3.16" Wheel offset: -1.50" Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25590 (1.796" inner diameter) Outer bearing: 25877 (1.375" inner diameter) Races (included) Inner race: 25520 Outer race: 25821 Grease seal (included): AG-GS-36282000SL Inner diameter: 2.000" Outer diameter: 3.628"
... Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and cone nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and 90-degree cone nuts are included Hub and drum are made in the USA Specs: Application: 7,000-lb E-Z Lube axles with #42 spindles Wheel size: 16" to 17-1/2" Drum dimensions: 12" diameter x 2" wide Works with 12" electric and hydraulic brake assemblies Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheelstud diameter: 9/16"-18 Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing : 25580 (1.750" inner diameter) Outer bearing: 14125A (1.250" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Outer diameter: 3.376" Inner diameter: 2.25" E-Z Lube-Compatible Hub for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
... Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Pre-greased hub is easy to install - no need to pack bearings Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheelstud diameter: 9/16" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376"
9/16" Wheel bolts are included in this brake kit. Allows you to switch your trailer over to disc brakes for improved performance and greater stopping power. ... Features: Dacromet-coated brake kit has everything you need to switch your trailer over to disc brakes 6 Disc brake end kits Hub-and-rotor assemblies Grease seals, races, and bearings Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for triple-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheelstud diameter: 9/16" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing 25580 Outer bearing: 14125A Races Inner race: 25520 Outer race: 14276 Seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brake kit including hub-and-rotor assemblies with bearings, races, and seals Hydraulic triple-axle brake line kit (1) 30' Long brake line - 3/16" (1) 6' Long brake line - 3/16" (6) 4-1/4" Long brake lines - 3/16" (6) 18" Male/male rubber flex lines (3) 3/16" Brass T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
This kit includes everything you need to upgrade your triple-axle boat trailer or camper to disc brakes for improved performance and greater stopping power. The Maxx coating is even better than Dacromet for superior corrosion protection.This pump-and-motor-based system increases response time compared with surge-type actuators because the trailer brakes are triggered when you apply the brakes in the tow vehicle, as opposed to when the trailer pushes against the hitch ball.
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with boat trailers.Features: All-inclusive kit has everything you need to switch your trailer over to disc brakes 6 Disc brake end kits Hub-and-rotor assemblies Grease seals, caps, races and bearings Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for triple-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheelstud diameter: 1/2" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing 25580 Outer bearing: 14125A Races Inner race: 25520 Outer race: 14276 Seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brake kit including hub-and-rotor assemblies with bearings, races, and seals Hydraulic triple-axle brake line kit (1) 30' Long brake line - 3/16" (1) 6' Long brake line - 3/16" (6) 4-1/4" Long brake lines - 3/16" (6) 18" Male/male rubber flex lines (3) 3/16" Brass T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Replace a worn hub-and-rotor on your 7K trailer axle with this 1-piece DeeMaxx assembly. Maxx coating fights corrosion, while the vented rotor and drain holes help keep braking smooth, cool, and consistent.Fits Common 7K Disc Brake Setups: Matches 7,000-lb axles using 25580 inner bearings and 14125A outer bearings. Works With Heavy-Duty TrailerWheels: 8 on 6-1/2" bolt pattern fits common 8-lug trailerwheel setups from 15" to 17-1/2". Built for Hydraulic Disc Brakes: Designed for compatible DeeMaxx calipers and brackets (sold separately) on hydraulic brake systems.
... The one-piece design helps simplify installation, so you can get your trailer back on the road with confidence.Corrosion Protection for Wet Conditions: MAXX coating helps protect the assembly from corrosion caused by water, road spray, and the elements. Fits 8,000-lb Axles: Designed for heavy-duty trailer disc brake systems built around 8,000-lb axles. 13" Rotor with 9/16" Studs: Matches DeeMaxx disc brake systems using this rotor size and wheelstud configuration. 25580/02475 Bearing Combination: Uses a 25580 inner bearing, 02475 outer bearing, and matching races for the specified hub configuration.
Haul with confidence using DeeMaxx 13" hub-rotor assemblies with MAXX coating and threaded oil cap. Designed for 8K oil bath axles with 5/8" studs. Includes races. Works with most disc brake calipers and mounting brackets.Highlights Fits 8,000-lb Axles: Works with 16" - 17-1/2" wheels using 8 on 6-1/2" bolt pattern and 5/8" studs. Built to Handle Wet, Salty Conditions: Maxx coating resists corrosion with 1,000-hour salt-spray rating.
Replace a worn hub on your 8,000-lb hybrid spring axle. Larger outer bearing helps extend axle life while maintaining standard 7K overhang. Fits 12" electric or hydraulic drum brakes.Pre-Installed Components Cut Down on Setup Bearing races and 5/8" zinc-plated wheelstuds come installed in the hub, eliminating a few steps during replacement. The zinc coating also helps protect the studs from corrosion around the wheel mounting area.
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Pre-greased hub is easy to install - no need to pack bearings E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb E-Z Lube trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheelstud diameter: 1/2" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" E-Z Lube-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Stop a loaded triple-axle trailer with confidence. This Hydrastar plug-and-play kit upgrades you to 6K-rated disc brakes, a 1,600-psi EOH actuator, and brake lines- for smooth, powerful, spill-free braking.Specs Configuration: Triple axle kit Axle Rating: 6,000 lbs per axle Actuator: Max output: 1,600 psi Power: 12V DC Brake Hardware: Brake flange: 5-bolt Bolt pattern: 6 on 5-1/2 Wheelstuds: 1/2" diameter Hydraulic port size: 3/16" Brake Lines: 24" main line 3/16" main line Rated for 3,000 psi Warranty: Actuator: 2-year limited Disc brake components: 3-year limited
Trailer axle measures 49-1/2" from hub face to hub face and 38-7/16" from Spring center to spring center. Includes fully pre-assembled studded hubs. ... Features: Square axle beam acts as part of your trailer' suspension system Replaces an axle on your trailer Straight spindles - no drop Studded hubs are sturdy and corrosion resistant Bearings, races, seals, grease caps, wheelstuds, lug nuts, and quality calcium-sulfonate grease included Specs: Weight capacity: 1,800 lbs Hub-face-to-hub-face length: 49-1/2" Spring-center-to-spring-center length: 38-7/16" Overall beam length: 54" Hub bolt pattern: 5 on 4-1/2"
Stud cleaning tool allows you to quickly clean the rusted and corroded 1/2" wheelstuds on your car or trailer. Stainless steel brush efficiently cleans studs to ensure proper wheel mounting. ... Features: Stud cleaning tool allows you to quickly clean rusted and corroded 1/2" wheelstuds Clean studs allow for proper wheel mounting Includes stud cleaning tool, stainless steel brush cartridge, and 1/2" drive adapter Requires handheld drill (not included) or Counteract air driver (CA39FR - sold separately)
Hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with a Maxx coating for excellent rust resistance, this 1-piece unit is balanced for a smooth ride. Water drains from the hat easily.Features: Single-piece assembly makes installation a snap, whether you're retrofitting or switching from drum brakes Machined process minimizes runout and warping Contaminants can't get in between rotor and hub Balanced unit provides a smooth ride Vented design effectively dissipates heat, preventing heat-related damage Drainage holes in the hat section allow water to drain easily, preventing corrosion 9/16" Wheelstuds and industry-standard races are included Cast iron construction ensures a favorable friction coefficient for necessary stopping power Maxx coating provides superior corrosion resistance for freshwater or saltwater use Over 1,000-hour salt-spray rating Specs: Fits: Axle capacity: 8,000 lbs Wheel Size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 9/16" Outer diameter: 13" 7-Year warranty Bearing, Race, and Seal Information: Bearings (sold separately) Inner bearing: 25580 Outer bearing: 02475 Races (included) Inner race: 25520 Outer race: 02420 Grease seal (sold separately): RG06-070
Replaces 1 drive-in wheelstud for your trailer hub. Bolt dimensions: 5/8"-18 x 2-3/4" long.Features: Replaces a drive-in wheelstud for your trailer hub Quantity: 1 wheelstud A B C D E 5/8"-18 2-3/4" 0.31" 1.03" 0.69"
Filters
