Replacement Axle And Leaf Springs For A 4' x 6' Single Axle Trailer
Updated 10/30/2023 | Published 10/28/2023
Products Featured in This Question
Question:
Can I replace my 62inch axel on my utility trailer to a longer one to accommodate larger tires also my leaf springs are 47inch can I put shorter ones on. My traler is a 4x6. Its going to be used for my rooftop tent and pull out kitchen and gear.
asked by: Fred
Expert Reply:
It is possible to replace your 62" long axle with a longer one. Our next size up is going to be a 72" long 2K rated axle like part # e32GR. The axle being 72" across measured from hub-face to hub-face. This axle comes with 5 on 4-1/2" idler hubs, which will allow for a ton of tire/wheel combos.
In order to use our axle you would likely need to relocate the spring seats. We sell them individually with part # TRSS175. From the looks of things, you would need a new u-bolt kit # CE23000 as well.
As far as the leaf springs, you certainly can go with a shorter spring. In fact, you are probably going to have to go with a smaller spring, as 47" long leaf springs are basically unheard of these days. New springs will require installation of new spring hangers. You could use a hanger/bolt kit like part # APS4. For the leaf spring itself, we have a few different sizes for the 2K axles. I have listed your options below.
20-3/8" long # e84SR
26" long # e77SR
I know there can be a lot involved with replacing all of these components. Feel free to reach out with any additional questions.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Standard Grade
- Universal Group
more information >
Continue Researching
- Video: Review of EMCO Trailer Leaf Springs - 3 Leaf Slipper Spring 1500 lb Trailer Axle - EM53UJ
- Search Results: 2k7158
- Search Results: trailer wheel studs
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Q&A: Do You Have a 2" Wide 4 Leaf Spring for a 2,990lbs Axle on My Trailerman Single Axle Trailer?
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: 3-Leaf Slipper Spring for 1,500-lb Trailer Axles - 24-1/4" Long - EMCO
- Shop: Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,200 lbs
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Search Results: trailer fenders
- Search Results: band
- Search Results: grease cap
- Video: Ultimate Overview of the Roller Shaft with Pal Nuts for Boat Trailer Rollers
- Search Results: fender bracket
- Search Results: trailer axles accessories and parts
- Q&A: Recommended Brackets to Mount Fulton Trailer Fenders # F008551
- Video: Ultimate Overview of the CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers
- Video: Let’s Check Out the Front/Center/Rear Hanger for Double-Eye Springs
- Video: In-Depth Review of the CE Smith Offset Spool Roller Assembly for Boat Trailers
- Video: Ultimate Overview of the CE Smith Front Hanger for 1-3/4" Wide Slipper Springs
- Video: Review of CE Smith Boat Trailer Parts - Galvanized Steel 5 Inch Offset Bracket - CES28JR
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Suspension Enhancement on a Trailer that Bottoms Out
- Q&A: How to Raise Suspension of Trailer that Has Slipper Springs
- Q&A: Replacing Slipper Springs With Double-Eye Springs
- Article: How to Raise Your Travel Trailer Height
- Q&A: Recommended Tires For 1994 Coleman Destiny Cedar XL With 5.30x12 Tires
- Q&A: Comparing a 5.30x12 and 5.70x8 Trailer Tire
on Trailer Leaf Springs
