Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
Published 10/09/2014 >
Question:
15 inch steel boat trailer wheels with 1/2inch studs. coned lug nuts what is the torque for the nuts?
asked by: Gary C
Expert Reply:
I attached a chart that has all of the recommended lug nut torque specs for trailer wheels. Based on your studs being 1/2 inch, your wheels being 15 inches in diameter, and your lug nuts being coned you would want to torque your lug nuts to 90-120 ft lbs of torque.
It's recommended that you tighten them in a star pattern. And then recheck them after about 50 miles of driving. I've lost several lug nuts by failing to recheck them after driving so I would strongly recommend you check yours after driving.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: trailer brakes kits
- Search Results: 023~106~00
- Search Results: dexter brake assembly
- Search Results: 014~112~00
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: wheel bearing cap
- Search Results: axle seal
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Non-ABS
- Shop: Dexter Tandem-Axle Trailer Equalizer Kit for 2-1/2" Slipper Springs - 14-1/4" Equalizers
- Shop: Replacement U-Bolt w/Nuts for 10,000-lb, Round Hayes Trailer Axles - 5/8" Diameter
- Shop: Trailer Wiring
- Video: Dexter Trailer Hub and Drum Assembly Spec Review
- Video: Dexter Electric Trailer Brakes Spec Review
- Q&A: Number 42 Spindle Recommendation
- Q&A: Lug Nut Torque for Aluminum Trailer Wheels
- Q&A: Torque for U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles
- Q&A: Recommended Scissor Stabilizer Jacks w/a 2,500 lbs Capacity Per Jack and a 24" Lift
- Shop: Brake Controller
- Shop: Base Plate for Tow Bar
- Video: A Closer Look at the Bearing Buddy Bearing Protectors
- Video: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles Review
- Shop: Front Mount Hitch
- Video: Review of Redline Dust Cap Driver Tool - 290-992
- Video: Checking Out the Loadstar ST205/75D15 Bias Trailer Tire with 15" White Wheel
- Shop: Suspension Enhancement


