Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
There is a flange on the Tandem Axle Trailer Fenders w/ Backing Plates #HP82VR that overlaps the backing plate that you'll use for the welding surface. When it comes to welding, we always recommend having this done by an experienced welder.
view full answer...The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.
view full answer...From what I could find out about your current circuit board, the Atwood Replacement Control Panel #AT91367 will be a direct replacement.
view full answer...You are definitely going to need radial tires for highway speeds and the best option is the Taskmaster 4.80R12 Radial Trailer Tire #TT48012C. Radial trailer tires are constructed in a manner so they have cords which run at 90 degrees to the…
view full answer...The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.
view full answer...There isn't really a right or wrong answer when it comes to selecting trim for the tops and sides of your trailer. It is really just about selecting the best shape/style/size that fits your contours the best. Trim like the Top Rail Trim for…
view full answer...Great question. As a general rule, when your trailer is loaded to it's full capacity, there should be a minimum clearance of 3 inches between the top of your tire and the underside of your fender.This should give you adequate clearance for…
view full answer...The measurements we've provided for the Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1 #HP36VR were taken from outside edge to outside edge of the bottoms of the fender (32"), from the top of the…
view full answer...We have a online diagram that will help you understand how the break away system is wired into your trailer. It is actually a simple installation. The system splices into the existing trailer wiring. The break away box will have 3 wires coming out of…
view full answer...The lid of the Bright Way Trailer Breakaway ICU Kit with 12V, 5-Amp-Hour Battery, Charger, and Wire Loom #BW94FR that you referenced has a wiring diagram shown that details how it wires. Not seen is there is a single wire that runs up to running…
view full answer...On this page (typically below the product links) there is a helpful link section that will have the install instructions fo the Hopkins Breakaway kit part #20400 that you referenced. I also attached an install video that shows the kit installed as…
view full answer...While I couldn't find any reference to a tank with one less component, the 6231 you mentioned is the part number - and is the exact same thing as - the Demco SBS Coach Air Kit for Air Force One Supplemental Braking System #SM99627. It used to be…
view full answer...Related Searches
Filter Your Search
Contact and Help