If you off-road but space is tight, this Tallboy kit gives you both lifting and support in one setup. The 6-ton bottle jack reaches high-clearance rigs, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Highlights Lift and Support Your Rig: 6-ton Tallboyjack raises the vehicle, while the 6-ton stand supports it during service. Reach High-Clearance Setups: Jack lifts from 8-1/2" to 37-3/4", and the stand supports from 10-13/16" to 28-3/4".
If you wrench on a lifted Jeep, Bronco, UTV, or other high-clearance rig, conventional stands may not reach. The Tallboy supports up to 6 tons across seven positions from 10-13/16" to 28-3/4", then breaks down into a compact travel bag.Support the Load and Move Your Jack The Tallboyjack stand complements Power Mountain's Tallboy bottle jacks by taking over the support job after the load is raised.
If you off-road but space is tight, the Tallboy kit gives you both lifting and support in one setup. The 2-ton bottle jack handles ATVs and side-by-sides, while the 6-ton stand supports the raised load so you can reposition the jack and keep working.Highlights Lift and Support Your Powersports Rig: 2-ton Tallboyjack raises the vehicle, while the 6-ton stand supports it during service. Work Across Different Heights: Jack lifts from 7-15/16" to 26-3/4", and the stand supports from 10-13/16" to 28-3/4".
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The oversized base plate gives you a solid foundation on the trail. ... Once the vehicle is raised, the Power Mountain Tallboyjack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboyjack for the next lifting position.
If a tire gives out on your camper, you need a jack that handles the weight. The Tallboy combines compact size with 12-ton lift capacity and provides some serious lift. And the oversized base plate helps with stability on rough ground.Even when the shoulder is a little rough, the oversized base plate helps the jack stay planted and secure. You can use the swappable saddles to lift from the axle or the frame, depending on what's safest. And if you want additional stability, a jack pad (like the Outrigger Pad or StakPad ) can add another layer of support.
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The large base plate gives you a solid foundation on the trail. ... Once the vehicle is raised, the Power Mountain Tallboyjack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboyjack for the next lifting position.
Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…
Hey Joe, thanks for the information! To replace your Dexter 072-079-01 leaf springs, I recommend the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles item #EM28AJ. This is a 4,000 lbs leaf spring designed for 8,000 lbs axles. It's got 7-leafs…
Hey Kevin. The only suggestion I have would be to buy a hardcase and store the jack in it. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only available with the included bag. The bag is helpful because a hydraulic bottle jack needs…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hi Gary, I completely understand why you’re hesitant to just pour this into your fresh tank. Since BluTech’s site says to call if you do not have the filtration system, it makes sense that you would want a clear and safe way to use it. The Blu…
The shackle strap length is measured from the center of one bolt hole to the center of the other. The Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs #K71-358-00 uses 3-1/8" long shackles which are found on…
No, there is not Jeff. The highest capacity swing away adapter we have is the Swagman Swivel Hitch Extender item #S86SR. It tops out at 300 lbs. The rest like the Kuat Pivot item #PVP20B max out at 250 lbs. Please note that all hitch…
Your 6K Dexter axle uses spindles that are compatible with a 25580 inner/ 14125A outer bearing and a 10-36 grease seal. We offer a replacement bearing kit as part #BK3-200 that includes the inner and outer bearings and races, the grease seal and a…
Hello Julio, thanks for reaching out. The appropriate spring for your trailer will depend on the weight capacity of each axle. Ideally the springs will match the axle capacity. Like for example the 4-Leaf Double-Eye Spring #DX45CR is rated for 2,600…
Hey Scott, we have a 4-leaf double eye spring that is rated for 5,200 lb axles with the part #DX45CR which is the very popular size of 25-1/4 inches. I would need to know for sure how long your current springs are to know for sure if this is correct…
Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…
You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…
Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. ... Features: SnapJack foot improves the stability of your stabilizer jack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
Get more traction and stability for your camper's scissor jack by snapping these durable, molded rubber pads onto the base. Fits almost any scissor jack with a bowtie base and installs permanently so you never have to find a spot to store it.Features: Snaps onto the base of your scissor jack for added traction and stability Increases surface area to help prevent sinking into soft ground Grips uneven terrain and prevents metal from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Protects footpad from rocks and roots Won't crack, break, or crumble Molded EPDM rubber is more durable than crumb rubber Has built-in drain holes to release moisture, helping to prevent corrosion Installs permanently - no need to remove and store Just pop the shoe on, use a screwdriver to stretch the rubber over the base, and secure with included ties Made in the USA Specs: Application: 2,500-lb to 9,000-lb scissor jacks with bowtie bases Base dimensions: 8-3/4" long x 4-3/8" wide Adapters included to fit 8" long bases External pad dimensions: 11" long x 6-1/2" wide Quantity: 2 pads 2-Year limited warranty
The hydraulic bottle jack lifts, holds, and locks vehicles in place without jack stands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.After you have the vehicle lifted to the desired height, the jack will automatically lock into place. The Unijack will then double as a jack stand to support the lift. To unlock the jack, simply turn the lever at the base of the piston counterclockwise and the hydraulics will slowly move in a downward motion.
When the trailer settles into soft ground or the load shifts, you can get moving again without wasting time looking for a workaround. 48" farm jack features an 8,000 lb capacity and manual operation for trailer, farm, and off-road use.Reposition Loads That Settled Crooked: Farm jack design handles lifting and positioning when trailers do not sit level. Keep a Recovery Tool Ready to Grab: Compact footprint stores easier in your trailer or equipment setup between jobs.
... High-impact polyurethane resists damage and is treaded for maximum grip. Ramps, chocks, and jack pads nest together for compact storage.Features: Comprehensive kit easily levels your trailer or RV Includes 2 levelers, 2 wheel chocks, and 4 jack pads Compact levelers help your trailer stay flat on any surface Adjust to any height up to 4-1/2" Works with tires sizes up to 32" wide Ribbed bottom keeps ramps firmly in place on the ground Treaded surface grips your tire for added stability Heavy-duty wheel chocks keep your trailer from rolling when it's parked and leveled Drainage holes prevent water buildup from reducing traction Jack pads serve as stabilizing cushions so the leveling system won't sink into the ground Connectable design allows the system to nest together for compact storage High-impact polyurethane holds up under tremendous weight Resists scuffs and abrasions Specs: Quantity: 2 leveling ramps, 2 wheel chocks, and 4 jack pads Ramp dimensions: 16-9/16" long x 14-9/16" wide x 4-1/2" tall System weight: 9.9 lbs 1-Year warranty
Setting jacks on soft ground can cause them to sink and throw off your setup. These large jack pads spread the load over a wider surface, spreading the load across a wider surface so jack feet don't press into dirt or gravel.Highlights Larger Footprint Under Jacks: Bigger pad size spreads weight across more surface on soft ground. Reduces Jack Sink-In: Designed to support stabilizer jacks and limit sinking on uneven surfaces.
This electric scissor jack lets you easily raise and lower your vehicle for emergency tire changes. It plugs into your vehicle's 12-volt accessory outlet for use while on the road, and it includes a hand-held remote with 12' cord.Features: Electric scissor jack lets you raise and lower your vehicle for emergency tire changes Designed for compact to medium sized vehicles Push-button remote lets you operate jack from up to 12' away Plugs into your vehicle's 12-volt accessory outlet Emergency hand crank lets you operate jack if no power is available from your vehicle's battery 3 Replacement 11-amp fuses included in case of blowout from overloaded circuit Compact carry case lets you easily store and transport jack and hand crank in your vehicle Specs: Weight capacity: Extended 14": 4,000 lbs Extended 10": 2,400 lbs Extended 8": 1,600 lbs Extended 6": 1,200 lbs Lift range: 4-3/8" - 13-3/8" Base dimensions: 7" long x 5" wide Rated current: 11 amps Output power: 75 watts Weight: 11 lbs 1-Year limited warranty
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Small stabilizer feet can press into soft ground and shift your setup. These compact jack pads add a base under each jack, spreading the load so your stabilizers hold position.Highlights Supports Stabilizer Jacks on Soft Ground: Pads sit under jack feet to distribute weight across a wider area. Compact Size for Easy Placement: Smaller footprint fits tight spaces under stabilizers.
Get yourself out of tricky spots with this hydraulic recovery jack. Each downward motion on the handle lifts your vehicle 1/2" and rubber bumpers shield it from damage. Made from aircraft grade aluminum for maximum strength.Features: Recovery jack raises, lowers, and stabilizes your vehicle to help you out of tricky spots on the trail Each downward motion gives you 1/2" of lift 9 Locating points for the jack's hook give you more flexibility to get leverage under your vehicle during recoveries Red lowering lever lets you safely lower the vehicle either slowly or quickly Rubber bumper protects your vehicle from dents and scratches Foot rotates 360 degrees and pivots to match the terrain and increase reliability For increased stability on soft or slick ground, pair with ARB Jack Pad (sold separately) Constructed from aircraft grade 6061 T6 aluminum for maximum strength Meets ASME standards Specs: Weight capacity: 4,409 lbs Lift range: 6" - 46" Travel: 21" - 22" Height: Compressed: 35" Extended: 56" Foot dimensions: 6-1/2" diameter x 2" tall Weight: 23 lbs 3-Year warranty
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
When the trailer settles into soft ground or the load shifts, you can get moving again without wasting time looking for a workaround. 60" farm jack features an 8,000 lb capacity and manual operation for trailer, farm, and off-road use.Pull Stuck Loads That Will Not Roll Free Some recovery situations need pulling force instead of vertical lift. This farm jack can be used with chains or straps for manual winching, giving you another way to drag, reposition, or free stuck equipment when traction alone is not enough to move it.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The bottle jack locks into place for a stable, safe lift.After you have the vehicle or object lifted to the desired height the jack will automatically lock into place. To unlock the jack, simply turn the lever at the base of the piston counterclockwise and the hydraulics will slowly move in a downward motion.
The Triple Lift jack adapts to multiple vehicles, ATVs, UTVs, and motorcycles with its ability to remove the lift saddle. The locking safety bar holds the jack in place once raised, removing the need for jack stands.Using the Triple Lift Jack The Triple Lift floor jack is a 3-in-1 jack that converts from a floor jack to an ATV jack and also to a jack stand. The removable round lifting saddle is perfect for raising vehicles.
... Wedge the boards under your tires and the traction teeth will grip the tread as you drive. One board doubles as a jack pad if you need to change a tire.Features: Compact recovery boards provide traction when your vehicle becomes stuck in mud, snow, or sand Built for small tires on ATVs, side by sides, and small CUVs Simple, effective design - wedge boards underneath your tires and traction teeth grip tread as you drive Prevents tire damage by limiting wheel spin during recovery Pull boards out of the muck after recovery with included orange nylon leashes One board doubles as a jack pad so you can change a flat tire on the trail Structural bracing provides a flat surface for your jack and prevents it from sinking Accessory holes allow attachment to MOLLE panels or brackets using mounting pins (sold separately) Board ends work as shovels so you can dig to reach your tires Built-in handles provide a solid grip Weather-resistant carry bag (sold separately) provides convenient storage and transport Specs: Quantity: 2 boards Vehicle weight capacity: 9,900 lbs per pair Dimensions: 25" long x 12-7/8" wide x 2-5/8" tall Weight: 4.5 lbs per board Color: orange Construction: fiber-reinforced nylon Lifetime warranty Note: Not recommended for normal highway tires since the tread is too narrow and shallow to properly engage with the traction teeth.
Get set up fast and work with confidence. This 2-ton trolley jack and ratcheting jack stands combo rolls into place on swivel casters, lifts to 13", and locks between 10-3/8"-16-3/8" for routine service at home.Features: 2-Ton trolley jack and jack stands combo - 4,000-lb capacity Steel lifting arm with tough enamel finish Swivel casters for easy positioning Lightweight design for fast placement Ratcheting jack stands with 10 lock-safe settings Jack stand height range: 10-3/8" to 16-3/8" Great for cars and light-duty trucks 1-year warranty Specs: Capacity: 2 tons Jack low height: 5-1/8" Jack maximum height: 13" Jack lift range: 7-7/8" Jack stand adjustment range: 10-3/8" to 16-3/8" Warranty: 1 year
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Filters
