On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.Features: Diffused strobe or DOT lamp in a 6" oval form factor Grommet-mount design with dual AMP connector Meets or exceeds FMVSS 108; Amber strobe meets SAE J595 IP68 rated for dust and water incursion Sonically welded housing for a 100% sealed light Comes with lifetime warranty Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (grommet mount): 6-1/2" L x 2-1/4" W x 1-1/2" D LED count: 32 Voltage: 9-14 VDC Current - Amber strobe's reverse: 0.575 A (± 0.085 A) Current - Amber strobe: 0.280 A Current - Stop/Turn: 0.170 A (± 0.030 A) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the features of a traditional stop, tail, turn, and reverse lamp, with the new styling of a diffused top and bottom lensing.
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer with the built-in flange, and hardwires to trailer.Features: Halo tail light is bright and easy to see, day or night Outer band functions as tail light Center flashes for turn signal Both brightens for brake light Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires into trailer Black wire for tail light Red wire for brake and turn signal White wire for ground DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" thick Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" thick Light extends 3/4" out from trailer Diodes: 22 Power draw at 12.8 volts: Tail light: 0.295 amps Brake/turn signal light: 0.59 amps Lifetime warranty on LEDs
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal against moisture.Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surfacemount - hardware not included Power lead and ground wire connect to your vehicle Specs: Dimensions: 7-1/8" diameter x 2-3/16" thick Distance between mounting holes (center on center): 6-1/4" Compatible with 12V DC systems Bulb type: 1157 Power draw at 12.8 volts: Stop: 2.4 amps Tail: 0.5 amps 3-Year warranty
This GloLight transit tail light is bright, easy to see, and just looks cool. It seals out moisture with the weathertight gasket. Mounts on the surface of your vehicle with screws (not included). ... Features: Halo tail light is bright and easy to see, day or night Inner ring glows for tail light Outer ring flashes for turn signal and brightens for brake light Weather resistant Included gasket creates weathertight seal Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Durable polycarbonate housing and acrylic lens Surfacemount Hardware not included AMP-style plug DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 7" wide x 7" tall x 1-5/8" thick Compatible with 12V DC systems Diodes: 32 Power draw at 12V: Tail: 0.135 amps Stop/turn: 0.340 amps Lifetime warranty on LEDs
Need a compact light with easy control and softer lighting? This LED puck light features a push button on and off switch and a frost lens for diffused illumination. ... Surface-Mount Fit: 4-1/2" diameter works for added or replacement interior lighting. Specs Electrical: Voltage: 12V Wattage: 4.5 watts Light type: LED Light Output: Lumens: 396 Beam angle: 180 degrees Color temperature: 3,200 K Dimensions: Diameter: 4-1/2"
5-3/8" Waterproof light with built-in rear reflex reflector displays brake, tail, and turn signals on your trailer. Mounts on the surface of the trailer and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Built-in rear reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate base with acrylic lens Surfacemount with built-in flange Hardware not included 3-Wire pigtail harness hardwires to the trailer White wire for ground Brown wire for tail lights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Dimensions: 5-3/8" diameter x 5/8" thick Compatible with 12V DC systems Diodes: 20 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. ... Features: Oval brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Surfacemount with built-in flange Hardware not included Optional snap-on reflector trim ring: A78RXB (sold separately) 3-Wire pigtail hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center on center): Horizontal: 7" Vertical: 2-3/4" Compatible with 12V DC systems Diodes: 6 Power draw at 12 volts: Brake/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout.
... Surfacemount. 2-Wire pigtail. 10 DiodesFeatures: Low-profile dome light provides bright white light for refrigerated trucks and trailers Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens with white LEDs IP65 rated for dust and water resistance Compatible with 12V and 24V DC systems Surfacemount - hardware not included Included trim ring adds a finished look 2-Wire pigtail includes power lead and ground wire Specs: Quantity: 1 lightLight output: Effective lumen output: 1,200 lumens Raw lumen output: 1,500 lumens Diodes: 10 Light type: daylight white Color temperature: 5,700 K Wire length: 18" Overall dimensions: 18-1/4" long x 5-3/4" tall x 1/2" thick Power draw at: 12V: 1 amp 24V: 0.6 amps Lifetime warranty on LEDs
8-11/16" Low-profile, LED tail light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome, with a lens that snaps on so it's easy to replace the bulb. ... Features: Low-profile rectangular RV brake, turn, and tail light White LEDs with red lens More efficient and durable than incandescent bulbs Black ABS plastic base and snap-on lens Surfacemount Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger side Driver side: RVSTLB61 (sold separately) Light dimensions: 8-11/16" long x 3-3/16" tall x 2-1/8" thick Compatible with 12V DC systems Diodes: 9 Power draw at 12.8V: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs
Need a compact light with a softer glow? This LED puck light with a frost lens provides even, diffused illumination in a low-profile design. It installs easily and is a great option for adding comfortable lighting where you need it.Surface-Mount Fit: 4-1/2" diameter works for added or replacement interior lighting. Compact Interior Lighting: Low-profile puck design fits smaller RV ceiling or cabinet spaces.
Need a compact light with easy control? This LED puck light features a push button on and off switch and delivers bright, even illumination in a low-profile design. ... Wide Puck Light Coverage: 180-degree beam angle spreads light across your installed area. Warm Interior Light: 3,200 K color temperature gives your RV a softer LED light tone.
Add a sleek and compliant red ID light to your trailer with this low-profile, surface-mount design. It installs with two screws and helps meet FMVSS 108 lighting standards.Features: Meets FMVSS 108 identification light requirements for vehicles over 80" wide Ultra-thin design (1/2" deep) minimizes protrusion for a sleek profile Clear lens with red LEDs creates bright, wide-angle illumination Vacuum-sealed and sonically-welded housing ensures lifetime protection Rugged polycarbonate lens resists impacts and UV damage TecSeal urethane potting and IP68 rating provide complete weatherproofing Durable design rated for over 100,000 hours of LED performance Flexible mounting can install horizontally, vertically, or at an angle Specs: Mounting: Surfacemount with (2) #8 screws (screw covers included) Wire lead: 9" pigtail (white ground, black +12 V power) Lens color: Clear with red LEDs Voltage: 9-14 V DC Current draw: 0.04-0.07 A Dimensions: 15-1/2" long x 1-5/16" tall x 1/2" deep Certifications: FMVSS 108, IP68 rated
18" Low-profile, LED tail light displays brake, tail, and turn signals on your RV that's over 80" wide. It mounts on the surface of the motorhome and hardwires with the included pigtail harness.Features: Low-profile RV brake, turn, and tail light Weatherproof White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Mounts on surface of trailer Hardware not included Can be mounted in vertical or horizontal orientation 3-Wire pigtail White wire for ground Red wire for brake light Black wire for tail light DOT and SAE compliant Specs: For motorhomes that are over 80" wide Dimensions: 18" long x 1-1/2" tall x 3/4" thick Distance between mounting holes (center on center): 15-7/8" Diodes: 20 2-Year warranty
7-9/16" LED turn and parking light is waterproof, and mounts to the surface of your trailer with the built-in flange so you don't need to cut a hole in your trailer. ... Features: Oval turn signal/parking light Brightens for parking light Flashes for turn signal Waterproof - great for boat trailers White LEDs with amber lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" wide x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center on center): Horizontal: 7" Vertical: 2-3/4" Compatible with 12V DC systems Diodes: 10 Power draw at 12.8 volts: Turn signal light: 0.243 amps Parking light: 0.046 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout.
11" Weatherproof light displays brake, tail, and turn signals on your trailer. Built-in reflector increases light output. Mounts on the surface of your trailer and hardwires with the included pigtail harness.Features: Rectangular brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal light Built-in reflective lens increases light output White LEDs with red lens More efficient and durable than incandescent bulbs Weatherproof polycarbonate lens and housing Surfacemount to trailer Hardware not included 6-Wire pigtail harness hardwires to trailer DOT and SAE compliant Specs: Dimensions: 11" long x 8" tall x 1-1/4" thick Diodes: 80 1-Year warranty
5-15/16" Low-profile RV light displays brake, tail, and turn signals on the passenger side. It mounts on the surface of your motorhome and hardwires to the RV with the 3-wire pigtail.Features: Low-profile brake, tail, and turn signal light for RVs Glows for tail light Brightens for brake light Flashes for turn signal White LEDs with red lens More efficient and durable than incandescent bulbs ABS plastic base with acrylic lens Surfacemount Hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: passenger side Driver side: RVSTL11 (sold separately) Light dimensions: 5-15/16" diameter x 1-5/16" thick Compatible with 12V DC systems Diodes: 6 Power draw at 12.8 volts: Stop/turn: 0.421 amps Tail: 0.114 amps Lifetime warranty on LEDs
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. ... Surface-Mount, Bolt-On Installation is Easy This surface-mount puck light is incredibly easy to install as an upgrade or direct replacement of your existing light.
7-1/2" Waterproof light with a built-in reflex reflector displays brake, tail, and turn signals on you trailer. The reflector doubles as a flange for mounting. ... Features: Oval brake, tail, and turn signal Built-in rear reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Low-voltage design is super efficient Polycarbonate base and acrylic lens Surfacemount with built-in flange Hardware not included Can be mounted horizontally or vertically 3-Wire pigtail White wire for ground Brown wire for tail lights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Dimensions: 7-1/2" long x 3-1/4" wide x 11/16" thick Compatible with 12V DC systems Diodes: 22 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. ... Features: Rectangular RV brake, turn, and tail light Glows for tail light Brightens for brake light Flashes for turn signal LED with red lens More efficient and durable than incandescent bulb ABS plastic base and replaceable acrylic lens Surfacemount with bracket (sold separately) Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTLB0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
Dim or dead amber lights make your trailer harder to see from the front and sides. This LED upgrade replaces older incandescent fixtures and helps keep your rig visible, compliant, and ready for the next trip without constant bulb swaps.Simple 2-Wire Connection: Hard-wired with black power and white ground leads. SurfaceMount Fit: Mounting hole centers 4-13/16". Hardware not included. Specs Light: Function: LED marker/clearance light, PC rated (FMVSS P2 PC) LEDs: 16 Color: amber lens Overall dimensions: 5-3/4" long x 2" tall x 1-3/8" deep Mounting hole centers: 4-13/16" Construction: Housing and lens material: polycarbonate Construction: sealed, waterproof unit Electrical: Voltage: 12V DC Amp draw: 0.248A at 12.8V Wiring: hard wired, 2 wire (black = power, white = ground) Compliance And Warranty: Meets FMVSS P2 PC requirements Warranty: lifetime LED warranty
5-5/8" Waterproof LED light displays brake, tail, and turn signals on your trailer. It mounts to the surface of your trailer with the built-in flange that doubles as a reflector and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Built-in reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surfacemount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer FMVSS compliant for trailers under 80" wide Specs: Overall dimensions: 5-5/8" diameter x 3/4" thick Light face: 4" diameter Diodes: 7 Wire length: 6" Power draw at 12.8 volts: 0.033 amps Lifetime warranty on LEDs
4-1/2" x 2-7/8" x 1". Low-profile dome light illuminates an RV's interior with bright white light. Toggle switch controls power. Durable polycarbonate lens and housing. Surfacemount - hardware not included. 2-Wire design.Features: Low-profile, rectangular dome light provides bright white light for your trailer's interior Built-in toggle switch controls on/off function Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution Cool white LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provides brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lens with white LEDS Sonically sealed, waterproof housing and lens Compatible with 12V DC systems Surfacemount - hardware not included 2-Wire pigtail - includes power lead and ground wire Specs: Light output: Effective lumen output: 810 lumens Raw lumen output: 1,044 lumens Diodes: 18 Dimensions: 4-1/2" long x 2-7/8" tall x 1" thick Wiring length: 6" Power draw at 12.8V: 0.7 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Surface-mount puck light brightens up a closet, walkway, or kitchen countertop in your RV. Warm white LEDs are more energy efficient, last longer, and burn brighter than incandescents. ... Surface-Mount, Bolt-On Installation is Easy This surface-mount puck light is incredibly easy to install as an upgrade or direct replacement of your existing light.
... Surfacemount. 2-Wire pigtail.Features: Low-profile, exterior light provides bright white light for your RV or trailer's exterior Flood beam illuminates a wide area Light emits at 45-degree angle making it great for illuminating an outdoor area Sealed, waterproof housing and lens unit LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surfacemount - hardware included 2-Wire pigtail includes power lead and ground wire Specs: Overall dimensions: 4-5/16" long x 2" wide x 1-3/8" tall Diodes: 6 Power draw at 12V: 0.82 amps Lifetime warranty on LEDs
Filters
