Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Generally speaking bearing grease has so little water in it that significant expansion due to freezing temperatures is unlikely. Higher operating temperatures within the hubs while underway would potentially thin the grease but again not cause much…
view full answer...The side plates of the B&W gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail of your 2004 Dodge 2500 8-foot bed. See the B&W video I included at the 7 min and 30 second mark. If your Firestone air bags like…
view full answer...Your air bag mounting location will determine compatibility with the Gooseneck trailer hitch #BWGNRK1313. The side plates of the gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail. See diagram to the right and video…
view full answer...On this page (typically below the product links) there is a helpful link section that will have the install instructions fo the Hopkins Breakaway kit part #20400 that you referenced. I also attached an install video that shows the kit installed as…
view full answer...The replacement motor for the Greystone RV Range Hood with Light - 12V - 24" Wide - Black Item #324-000087 is the Replacement 12-Volt DC Fan Motor for Ventline RV Range Hood Item #BVD0218-00. If you also need to replace the fan blade the correct…
view full answer...The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole to eye hole.…
view full answer...If you have 3,500 lb axles the best choice would be 3,500 lb springs so that you could take advantage of the full axle capacity (assuming the trailer is rated similarly). The #e54SR is a great choice for you as it is a 3,500 lb axle leaf spring.
view full answer...When it comes to determining which equalizers are needed for your EZ Loader boat trailer, you will need to get some measurements. I have included a diagram with information as to what measurements are needed. I have also included a link to our…
view full answer...While we do have an option for you, I confirmed with my tech at Dometic/Atwood that the 10-gallon gas only models like the G10-1 are no longer available. With that being said, the replacement unit that is available from Dometic that includes gas is a…
view full answer...The only difference between a 4 leaf spring and a 5 leaf spring like the #e34SR is that the 4 leaf spring will use slightly thicker leaves and is 1/8 of an inch shorter. To get the best measurement of your existing springs, measure the center eye to…
view full answer...Yes, you can replace your 4 Leaf Springs with 5 Leaf Springs like part #e34SR as long as you replace all of the springs at the same time. There really isn't any advantage if you want to go with 5 leaf springs over 4 leaf springs. Typically, you…
view full answer...From what I have found, you have 4,400 lb axles on your 2010 Keystone Cougar 26BHSWE. Your axles have a hub face measurement of 85" and a 68-1/2" spring center. Unfortunately, 4,400 lb axles are no longer being made so you will also be…
view full answer...Filter Your Search
Contact and Help