Minimize chassis movement in your travel trailer with this jackstabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. ... Features: Helps to stabilize your travel trailer and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on travel trailers Bolts onto C-channel, I-beam, or H-beam trailer frames - no welding required Attaches to traditional stabilizerjacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 6 Stiffening pads 4 Spacer mounts 6 T-bolts 30 Nuts 48 Washers 18 Hex cap screws 12 Swing bolts 8 Hex washer heads 1-Year warranty
Cross brace bars permanently attach to your scissor jacks to reduce your RV's movement while parked. Once installed, the braces will extend and retract along with your scissor jacks. Tension handle lets you adjust the bars to increase stability.If the bolts on your jacks are smaller than 3/8", you will need to enlarge the bolt holes prior to installation. Scissor jacks must be mounted at a 90-degree angle from your trailer's frame.
You just backed your rig in, it's hot, and you aren't in the mood to crawl around in the gravel. Sound familiar? Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.Then, while the drill's still spinning, just nudge the shaft toward the center of the trailer to shift power to the other side. You'll have it stable before the camp chairs are out of the bag. Simple Install That Fits Most Trailers The stabilizer doesn't come with hardware, but the install's straightforward.
What folds flat like a pancake for easy storage, unfolds in seconds, and comes with a carry bag for easy transport? The Flap Jack! These durable jack blocks provides a stable base for your trailer, RV, or camper, making setup quick and hassle-free.Their solid design provides a steady, reliable lift, reducing stress on your jacks and stabilizers. Ideal for Multi-Point Setups Whether you're leveling a large trailer, stabilizing multiple jacks, or just want extra flexibility, this 4 pack has you covered. 2 Convenient carry bags make it easy to transport and store everything - no loose parts, no mess.
Kick the crud off your boots and level out your trailer! This kit pairs a Flap Jackstabilizing block with a shoe scraper, both packed neatly in one carry case. It's the clean, compact combo your campsite (and floors) will thank you for.The grid-top scraper lets you clean your soles quickly before stepping into your trailer or truck bed, and it won't trap the mess inside. Quick, Tool-Free Setup The Flap Jack assembles in seconds - just separate the 3 pieces and let the built-in magnets snap everything into place.
What folds flat like a pancake for easy storage, unfolds in seconds, and comes with a carry bag for easy transport? The Flap Jack! These durable jack blocks provides a stable base for your trailer, RV, or camper, making setup quick and hassle-free.Simply separate the 3 pieces, align them, and let the built-in neodymium magnets snap everything into place. It's a quick, tool-free solution that gets you stabilized in seconds. Strong & Stable With a 6,000-lb weight capacity per block, each jack block is built to handle heavy loads without flexing.
What folds flat like a pancake for easy storage, unfolds in seconds, and comes with a carry bag for easy transport? The Flap Jack! This durable jack block provides a stable base for your trailer, RV, or camper, making setup quick and hassle-free.Simply separate the 3 pieces, align them, and let the built-in neodymium magnets snap everything into place. It's a quick, tool-free solution that gets you stabilized in seconds. Strong & Stable With a 6,000-lb weight capacity, this jack block is built to handle heavy loads without flexing.
... Includes SnapJack feet for improved stability and grip on uneven terrain.Features: Scissor jacks help level and stabilize your 5th-wheel, travel, horse, or cargo trailer Large metal feet come with pre-installed SnapPads Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Added height on the SnapJack feet prevents the stabilizers from being over-extended 8-Hole top plates allow for greater adjustability during installation Includes manual crank handle and hardware to install SnapJack feet to stabilizers Added height on the SnapJack feet prevents the stabilizers from being over-extended Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Support capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks SnapJack Quantity: 2 Dimensions: 8-1/8" wide x 2-3/4" tall Weight: 3.8 lbs each Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Heavy-duty jackstabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. ... Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack. This stabilizerjack is handy for leveling or stabilizing lightweight trailers.
Drop-leg jackstabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the drop leg, and pin in place. ... Features: Drop-leg stabilizingjack helps keep your lightweight trailer or camper level and steady Great for loading and unloading cargo or for camping Telescoping drop leg lets you adjust the height Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place Round footplate provides stability Sturdy steel construction Weld-on installation Specs: Height: 20" from bottom of footplate to top of jack Travel: 18" 1-3/16" From center of hole to center of hole Drop leg width: 1-1/4" Mounting bracket dimensions: 8" long x 1-1/2" wide Footplate diameter: 5-1/4" Lift capacity: 2,000 lbs 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
These scissor jacks with a 10,000-lb combined capacity will help keep your trailer or RV stable. They adjust from 4-1/4" up to 28-1/4" as needed. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks. If you are looking for a safe, durable, and dependable option for stabilizing your trailer, these scissor jacks are a safe bet.
This leveling scissor jack with a 5,000-lb capacity will help keep your trailer or RV level and stable. It adjusts from 4-1/4" up to 24" as your application requires. ... Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Easy bolt-on installation with included hardware Crank handle sold separately Specs: Height: Collapsed: 4-1/4" Extended: 24" Lift: 24" Collapsed length: 26-3/16" Mounting base dimensions: 10-1/4" long x 3-1/4" wide Large bolt hole dimensions: 11/16" long x 7/16" wide Small bolt hole diameter: 5/16" Load capacity: 5,000 lbs Maximum capacity at 22" extension: 6,500 lbs Quantity: 1 jack 90-Day warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
These scissor jacks with a 10,000-lb combined capacity will help keep your trailer or RV stable. They adjust from 4-1/4" up to 30" as needed. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks. If you are looking for a safe, durable, and dependable option for stabilizing your trailer, these scissor jacks are a safe bet.
This leveling scissor jack with a 5,000-lb capacity will help keep your trailer or RV level and stable. It adjusts from 4-1/4" up to 30" as your application requires. ... Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Specs: Height: Collapsed: 4-1/4" Extended: 30" Lift: 30" Collapsed length: 32-1/2" Mounting base diameter: 9" Bolt hole diameter: 3/8" Load capacity: 5,000 lbs Quantity: 1 jack 90-Day warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Heavy-duty jacksstabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. ... Features: Stabilizingjacks help keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jacks up for travel, down for use Drop legs extend so you can adjust the height Spring-loaded levers release drop legs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Installation hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity per jack: 650 lbs Maximum load the jack can lift Support capacity per jack: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 2 jacks 1-Year warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... The bow-tie bases steady the jacks on soft surfaces. Handle included.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 10,000 lbs 2,500 lbs per jack Quantity: 4 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... The bow-tie base steadies the jack on soft surfaces.Features: Scissor jack helps to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie base keeps the jack steady, even on soft surfaces 8-Hole top plate allows for adjustability when mounting Bearing set on crank side extends jack life Black powder coated finish resists corrosion Handle (TJSC-24-HD) sold separately Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10-1/4" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" Support capacity: 2,500 lbs Quantity: 1 jack 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... The bow-tie base steadies the jack on soft surfaces. Includes handle.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Load-bearing stabilizers are strong enough to lift your trailer up to 6" while keeping a max bracket height of 25" - perfect for changing a tire. ... If you find yourself needing to use the stabilizers at an angle, you can do that. Just keep in mind that the wider lifting angle may reduce how high up you can lift the trailer. There is a marking on the inner tube of this jack to help you identify the maximum lift of 25".
Minimize chassis movement in your fifth-wheel RV with this jackstabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizerjacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
Minimize chassis movement in your fifth-wheel RV with this jackstabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizerjacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Power StabilizerJacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Switch-Controlled Operation: Flip-style switch kit retracts and extends both jacks from one spot. More Support Under Load: Embossed jack legs add strength during front or rear stabilization. Corrosion-Resistant Finish: Black powder coat stands up to rain, road spray, and storage exposure.
Base pad replaces the bricks and blocks normally needed when positioning your trailerjack. 8" Tall pad works as a jack stand to support your trailer's tongue or stabilizerjack.Features: Base pad works as a jack stand to provide a platform that supports the weight of your tongue or stabilizerjack Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pad easy to carry and retrieve from under your RV Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 1 pad Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when 2 are stacked: 14" 2-Year limited warranty
Base pads replace the bricks and blocks normally needed when positioning your trailerjack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizerjacks. Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizerjacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 4 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Filters
