1. E Track
  2. Erickson
  3. E-Track Rails
  4. Horizontal
  5. 1/2 Foot Long
  6. 800 lbs
Erickson Mini E-Track Plate - 2 Slots - Black - 800 lbs - Qty 1

Erickson Mini E-Track Plate - 2 Slots - Black - 800 lbs - Qty 1

Item # EM09134
lowest price pledge
Our Price: $8.54
E Track
Orders above $50 qualify for Free Shipping
Shipping Weight: 1.02 lbs
Quantity: 
In Stock
E Track EM09134 - 1/2 Foot Long - Erickson
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

This mini 2-slot E-track lets you add tie-down points to tight spots on your vehicle or trailer. Mount it almost anywhere - wheel wells, tailgate, floor, or wall - and attach E-track straps or tie-off rings. Bolt-on installation. 2,400 lbs Max load. Call 800-298-8924 to order Erickson e track part number EM09134 or order online at etrailer.com. Free expert support on all Erickson products. Guaranteed Lowest Price and Fastest Shipping for Erickson Mini E-Track Plate - 2 Slots - Black - 800 lbs - Qty 1. E Track reviews from real customers.
  • All Info
  • Q & A (3)
  • Videos (2)
  • Photos
  • Why etrailer?

Erickson E Track - EM09134

  • E-Track Rails
  • Horizontal
  • 1/2 Foot Long
  • Erickson
  • 800 lbs
  • 5 Inch Wide

This mini 2-slot E-track lets you add tie-down points to tight spots on your vehicle or trailer. Mount it almost anywhere - wheel wells, tailgate, floor, or wall - and attach E-track straps or tie-off rings. Bolt-on installation. 2,400 lbs Max load.


Features:

  • E-track provides tie-down points to secure a load in your truck, trailer, or van
    • For use with E-track straps and anchors (sold separately)
  • Short section with 2 horizontal slots can be installed almost anywhere
    • Great for wheel wells, tailgates, or other spots where space is limited
    • Can be installed on wall or floor
  • Black powder coated steel construction is rust resistant
  • Simple, bolt-on installation with screws or rivets (not included)


Specs:

  • Dimensions: 6-1/4" long x 5" wide
  • Safe working load limit (WLL): 800 lbs
  • Maximum load (break strength): 2,400 lbs
  • Diameter of mounting holes: 3/8"
  • Mounting hole spacing (center to center): 1-1/4"
  • 90-Day limited warranty


09134 Erickson Mini E-Track Plate - 2 Slots - Black - 2400 lbs - Qty 1





Video of Erickson Mini E-Track Plate - 2 Slots - Black - 800 lbs - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Erickson 2 Slot Mini E-Track Plate Review

Randy: Hey guys, it's Randy here at etrailer.com. Now, of course we have all kinds of cargo management systems that are available for trailers, vehicles, your house, whatever your case may be. Today we're taking a look at one that I kind of like. I think this is a nice set up. Basically it's from Erickson. It gives us two points of E-track contact or two connection points for any E-track accessory.

It kind of incorporates everything I like about E-track. You see we've got the edges here that allows us to slide up and over. Got our connection point here. Just uses some self tapping screws to secure it. Now, not only can this be used on trailer floors and sides, but we can use this in a lot of other situations, too.These can be used in our garages or in our houses for just getting some shelves, but we can use these on docks.

We can use these just about anywhere we need a connection point. Basically with an E-track like this, you can see we've got this trailer pretty much loaded out with it and it serves our purpose extremely well. We have connection rings like this, lashing ring. We have wheel chocks, we have shelf brackets, we have brackets that you can put two by lumber across side the side. So basically, anything that works with an E-track system is going to work with this.What makes this one a little bit different, it's kind of all in one.

With normal E-track, to get a smooth edge like this, you'll have to buy the additional cap, put that on and install it. I also like the matte finish on this. I think this is going to look really good in a lot of the trailers if looks are something that you're concerned with, and it has that powder coat finish on it. Generally with this type of connection point, they're all going to be a silver or something along those lines, a bright metallic or a silver. So, I think these can really blend in or stand out depending on your situation.Basically, this is going to give us a ton of versatility that we really don't get with a lot of other non E-track style of tie-downs like our loops there on the floor or some of the D-rings that we can install.

It's pretty much what you have, so you have to be sure you're getting the right thing in the right situation. With this we can switch it out with any manner of the E-track accessory and really have something that's extremely versatile and very, very usable. On the short side here, side to side, we're looking at about five and one eighth of an inch. From the outside here to here, it's going to be about six and three eights. And it looks like coming up from the floor, it's going to stick up about a half of an inch without the fasteners.Now, as far as the installation goes, it's going to be pretty straightforward. We're going to be using number 14 self tapping screws. You could also use hex bolts if you wanted to. The hole diameters here are five sixteenths of an inch, so good range of hardware that you can use, but the important thing is to pick out the right spot where you want it to be so you don't get it there and then have to move it again. We're just going to be placing ours here. Then once we have our fasteners in, we're ready to grab our favorite E-track accessory there. Get it slid in and it'll be ready to attach to.Here you can see using that as our connection point does a great job. Helps us get our generators tucked away in here, get it anywhere we need it to go. Of course, with an 800 pound safe working load limit, you'll want to choose enough of these tie downs and make sure you're choosing the accessories you're using that have enough capacity for whatever it is you plan on securing.

0
0

Ask the Experts about this Erickson E Track

  • Is There a Backing Plate for the Erickson Mini E-Track Plate and What Size Bolts Should Be Used
    It is not required to use a backing plate with the Erickson Mini E-Track Plate part # EM09134 but if you want to use one, that is perfectly fine you'd just need to make your own as we do not offer one for this. In regards to hardware, I'd suggest some grade 5 5/16" or 3/8" hex bolts 1-1/2" or 1-3/4" long should be fine depending on the thickness of the backing plate.
    view full answer...
  • Can Erickson Mini E-Track Plate be Used as Tie-Down for UTV or ATV
    Yes, you can use the Erickson Mini E-Track Plate # EM09134 with E-Track ratchet straps such as the CargoSmart Ratchet Straps for E-Track - 1" x 6' - 500 lbs # 3481717 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523, though you would not be able to use wheel chocks. I went out and test fit the plate with the Erickson E-Chock Wheel Chocks # EM09162-2 and found they would not fit. So if you were okay with not using wheel chocks -...
    view full answer...
  • Availability of 2-Slot E Track Horizontal Track with Black Powder Coat Finish
    I have a few of options for you, but this exact Erickson 2-Slot Horizontal E-Track # EM19145 isn't offered with a black powder coat finish. The Erickson Mini E-Track Plate # EM09134 is the closest option I have. It also has 2 horizontal slots and a nice matte black powder coat finish for superior corrosion resistance and adds a nice rugged look to it as well. This plate has a safe working load limit (WLL) of 800 lbs and a maximum load (break strength) of 2,400 lbs, which is much lower...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality e track for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate e track information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Randy B
Written by:
Matthew S
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.