From docking lights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 11 LEDs Guaranteed circuit board protection Durable impact resistant lens Exceeds FMVSS 108 standards, IP68 rated for dust and water proofing Multiple mounting positions Wire functions: Yellow: reverse Red: stop/turn Black: running lights White: ground Specs: Measurements: 15-1/2" long; 1-1/4" tall, 1/2" deep LEDs: 3 Color: Clear lens Voltage: 9 to 14 volts DC Mounting: Surface mounted using (2) screws (screws not included - screw caps included) Connector: 9" wire Lifetime warranty TecNiq packs wide angle and bright illumination for maximum safety while retaining a sleek design.
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.Features: Diffused strobe or DOT lamp in a 6" oval form factor Grommet-mount design with dual AMP connector Meets or exceeds FMVSS 108; Amber strobe meets SAE J595 IP68 rated for dust and water incursion Sonically welded housing for a 100% sealed light Comes with lifetime warranty Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (grommet mount): 6-1/2" L x 2-1/4" W x 1-1/2" D LED count: 32 Voltage: 9-14 VDC Current - Amber strobe's reverse: 0.575 A (± 0.085 A) Current - Amber strobe: 0.280 A Current - Stop/Turn: 0.170 A (± 0.030 A) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the features of a traditional stop, tail, turn, and reverse lamp, with the new styling of a diffused top and bottom lensing.
7-1/2" x 3-3/8" 4-Function, waterproof light acts as brake, tail, turn, and backup light. TecNiq red and clear lens creates a solid panel of light. Mounts to trailer surface with built-in flange (hardware not included). 2-Wire pigtail.Features: Oval trailer tail light serves 4 functions Turn signal light Tail light Brake light Backup light Red and clear lens creates a solid light pattern with a smooth appearance Sealed, waterproof unit includes durable, polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lens over red and white LEDs Surface-mount installation - hardware not included 4-Wire pigtail White wire for ground Yellow wire for reverse Red wire for stop/turn Black wire for tail Meets or exceeds FMVSS 108 standards Specs: Quantity: 1 tail light Dimensions: 7-1/2" long x 3-3/8" tall x 1-5/8" deep Mounting hole spacing: 7" horizontal x 2-3/4" vertical Diodes: 8 Power draw between 9 volts to 14 volts: Tail light: 0.11 amps to 0.13 amps Turn/backup light: 0.24 amps to 0.30 amps Lifetime warranty on LEDs
One light does it all. This 4" round grommet lamp drops into standard holes to handle stop, turn, tail, and reverse. Sealed, UV tough, and low draw, it keeps your trailer visible and compliant from campsite to jobsite.Features: Combination Stop/Turn/Tail and Reverse LED in a 4" round package Grommet mount fits standard 4" round applications Grommet (TN43TR) is sold separately Low current draw: high-intensity stop/turn uses ~0.13 A at 12 VDC; reverse adds 0.3 A TecSeal urethane potting protects the circuit board UV-resistant, automotive-grade polycarbonate lens IP68 rated - dustproof and waterproof with hermetic seal Meets FMVSS 108 requirements for wide and narrow vehicles Reliable performance rated over 100,000 hours Wire colors: White - Ground, Red - Stop/Turn, Black - Reverse Specs: Dimensions (grommet mount): 4-5/16" diameter x 1-5/8" depth LEDs: 8 red / 2 white Voltage: 9-14 VDC Current - Stop/Turn (red): 0.11 A to 0.15 A Current - Reverse (white): 0.3 A Connector: Tri-Pole Mounting: Grommet; fits standard mounting holes Ingress rating: IP68 Compliance: FMVSS 108 Construction: TecSeal urethane potting; UV-resistant polycarbonate Service life: rated over 100,000 hours Lifetime warranty TecNiq has designed this high visibility stop, tail, turn, and reverselight to ensure you are seen in all conditions and at great distances.
Bright and stylish, this X-shaped LED light will be easy for other drivers to spot as both a backup and tail light on your truck or trailer. Mounts in a cutout using a grommet (sold separately) and works with 3-prong plugs.Features: Oval reverse/tail light for trailers and trucks Certified for use as a backup light if installed as a pair X-shape design makes for a sleek, eye-catching look Red X glows for tail light Surrounding white LEDs light up for reverse Waterproof - great for boat trailers Red and white LEDs with clear lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting requires grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with standard 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Meets FMVSS 108 requirements Specs: Overall dimensions (including plug): 6-1/2" long x 2-3/8" tall x 1-3/4" thick Compatible with 12V DC systems Diodes: 12 Power draw 12.8 volts: 0.381 amps Lifetime limited warranty on LEDs What Wiring Do I Need?
I can certainly point you in the right direction. The big factor here is how much clearance you have in your wheel well. A typical 225/75R15 is 8.9" wide and 28.4" across when fully inflated. If we go up to a 16" tire like a…
I can help you add reverse lights to your trailer. Yes, It is important to pay attention to DOT compliance when adding lights on your boat trailer. Compliance will be met if you use the Optronics #BUL10CB light as your backup light. The #BUL72CB is…
The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…
Yes, the difference is that the BUL72CBGK has the grommet included. To replace both the light and grommet you will need #BUL72CB and #A70GB. I looked at a few images of MasterCraft Trailers and while we don't have the exact information of what it…
If you are looking to replace your current OPT STL 82-RCB, we actually have this exact light available. The Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Oval - Clear Lens #STL82RCB will be the exact replacement you…
The Optronics light best suited to your application as a 3rd brake light is their part #STL80RB which is a single-function LED light. The light #STL64RB that you referenced is a multi-function light (Stop/Turn/Tail) which you do not need. It is…
Yes, I've made a little list below of the different rough-in measurements for each toilet part number: #DOM74FR - 8.5" #DOM64FR - 8.5" #DOM24FR - 8.75" #DOM57FR - 10" #DOM37FR - 10" #DOM77FR - 10" #DOM67FR - 10"…
Curt has a brake controller install harness that fits your 2023 Jeep Grand Cherokee L with the part #C51446 which you could use with a Curt brake controller like the Triflex part #C51140. To find the connector in your vehicle you'll need to drop…
Since there isn't a latch on top of the ball of the #BWGNXA2061 you can use it with a fifth wheel to gooseneck adapter like the Andersen Ranch Hitch #AM3100 that you referenced. The other similar options that have the release lever on top of the…
To replace your AL-KO 568303 seal you will want the Oil Seal #91030. This seal has the same inner diameter of 2.750 inches and outer diameter of 3.779 inches. It is a confirmed fit for your #99 spindle that uses the AL-KO 568303 seal.
There was definitely a short somewhere on your brake output circuit. A bad ground would just cause the circuit to not function. I attached a help article that covers everything on testing brake magnets. It is possible that when you were replacing the…
Hello Richard, thanks for reaching out. Your 2015 Grand Design 337 RLS uses two 7,000 lb axles. This means the brake assemblies will be the standard 12" x 2" size with a 5 bolt brake flange. To replace yours I recommend the etrailer…
Backing up in the dark shouldnt feel like guesswork. This reverselight throws white light through a tinted lens that looks sharp during the day and bright at night. It snaps into a standard 6" oval grommet, seals out water and road grime.Highlights Bright, Clean ReverseLight: 8 white LEDs shine through a tinted lens for a sharp daytime look and strong visibility when backing up. Standard 6" Oval Fit: Drops into industry-standard openings with a rubber grommet for a flush, shock-damping install.
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. ... So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
This reversible 2-LED fender light keeps replacement simple since the same symmetrical assembly works on either side of your trailer. The sonically sealed housing is submersible, while the amber/red lens puts both colors in one compact light.Ready for Boat Trailer Use: Sonically sealed lens and housing keep the light submersible. Amber and Red in One Light: Smoke amber/red lens combines both lens colors in one assembly. Bracket Included: Black mounting bracket comes with the light for installation on your fender.
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
4" Round waterproof LED trailer light with 24 diodes provides stop, turn, tail, and back-up functions. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). ... LEDs vs. Incandescent Lights The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. ... And the plug covers the unused third point on the connection to seal it against dirt and moisture. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 light bar
7-1/2" x 3-5/16". Waterproof, 2-function trailer tail light acts as tail and reverselight. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.LEDs vs. Incandescent Lights The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
6-7/16" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... Features: Oval backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Accepts industry-standard 2-prong plug (sold separately) DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Dimensions: 6-7/16" long x 2-1/4" wide x 1-3/4" deep Diodes: 10 Power draw at 12.8 volts: 0.26 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
4-1/4" Round. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... Features: Round backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible GloLight Series features a brighter outer ring of light with a smooth appearance LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Light fits into a 4-1/2" diameter hole Accepts industry-standard 2-prong plug (sold separately) DOT compliant Meets FMVSS 108 requirements Specs: Dimensions: 4-1/4" diameter x 2-3/16" deep Diodes: 21 Power draw at 12.8 volts: 0.425 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
Rectangle LED trailer light with 20 diodes provides stop, turn, tail, and backup light functions. Surface mounts to trailer. 4-Wire pigtail.Features: Rectangular LED trailer light works as a stop, turn, tail, and reverselight functions LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Red and clear lens with white LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included 4-Wire design DOT compliant Specs: Dimensions: 9-5/8" long x 7" tall x 5/8" deep Diodes: 20 Wire length: 7" Weight: 0.95 lbs 1-Year limited warranty
7-1/2" x 3-1/4" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing. Recessed mount with built-in flange. ... Features: Oval backup light for trailers and utility trucks Certified for backup light function when installed as a pair in a 2-lamp system (second light sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Recessed mount with built-in flange Accepts industry-standard, 2-prong plug (A45CB or A49PB - sold separately) DOT compliant Meets FMVSS (2) R requirements Specs: Overall dimensions: 7-1/2" long x 3-1/4" tall x 1-1/8" deep Light face dimensions: 6-1/2" long x 2-1/4" tall x 1" deep Diodes: 6 Power draw at 12.8V: 0.260 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-9/16" x 3-5/16" Oval. Waterproof trailer utility light provides bright white light where needed. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
5-5/16" x 3-7/16" Rectangle. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
4-1/4" Diameter round. Weatherproof, LED trailer light provides backup light function. LumenX optics creates a solid panel of light. Recessed mount with grommet (not included). Accepts standard 2-wire PL3 plug.These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole.
Filters
