... Low voltage. Lousy weather. You still need to be seen. This 3/4" LED marker light mounts with a grommet, throws amber light through a smoked lens, and delivers 180-degree coverage without cluttering your rig.Specs Dimensions: Overall size: Diameter: 0.73" Depth: 0.93" Electrical: Operating voltage: 12V DC Power draw: 0.052 amps Wiring: Two 12" leads 0.156" Male bullet connectors Construction: Lens and housing: Polycarbonate Grommet: Rubber Lighting: LED count: 1 Light color: Amber Lens color: Smoked Compliance: Meets FMVSS 108 requirements PC-rated for 180-degree visibility Quantity: 1 marker/clearance light with grommet Warranty: Lifetime LED
Backing up in the dark? This light's got your back. It fits right into your trailer's 6-1/2" cutout and throws steady white light through a smoked lens. It's easy to wire, holds up to road grime, and won't overload your system.Highlights Bright White Visibility: Six bright LEDs punch through low light and bad weather to keep your rig visible when reversing. Recessed Mount: Fits snug in a 6-1/2" oval cutout to stay low-profile and protected.
Backing into a tight spot or hauling down the highway? Stay visible with this 2-9/16" oblong LED marker light. Amber LEDs shine through a clear lens, and sealed, waterproof design handles the elements. Hard-wired for secure power. ... Compliance & Warranty This light meets FMVSS PC standards and comes with a lifetime LED warranty, ensuring safety and reliability. Specs Light Type: LED Clearance/Marker Light Dimensions: 2-9/16" long x 15/16" wide x 9/16" tall Housing: Sealed, waterproof polycarbonate housing Mounting: Surface mount with two-hole installation Wiring: Hard-wired design with single power and ground wire Voltage: 12V Number of LEDs: 2 LEDs Compliance: FMVSS PC-Rated for clearance and marker light applications Warranty: Lifetime LED warranty
3-1/4" Diameter round. Waterproof trailer light mounts near your coupler to make it easier to see when you're hitching up to your tow vehicle. Durable polycarbonate lens and housing. Flange mount - hardware not included. 3-Wire pigtail.Features: Round trailer light mounts wherever you need a little extra light Mount it near your trailer's coupler to make it easier to see when you're hitching up to your truck Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing White and blue LEDs with clear lens Mounts on surface of trailer with built-in flange - hardware not included Available snap-on trim ring for clean look (A09BB, A09CB, and A09WB - sold separately) 3-Wire pigtail DOT compliant Specs: Light output: 151 lumens Diodes: 9 6 white LEDs and 3 blue LEDs Overall dimensions: 3-1/4" long x 15/16" deep Light face diameter: 3" Lead wire length: 5" Power draw at 12.8V DC: 0.114 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Backing into a tight spot or hauling down the highway? Stay visible with this 2-9/16" oblong LED marker light. Red LEDs shine through a clear lens, and sealed, waterproof design handles the elements. Hard-wired for secure power. ... Compliance & Warranty This light meets FMVSS PC standards and comes with a lifetime LED warranty, ensuring safety and reliability. Specs Light Type: LED Clearance/Marker Light Dimensions: 2-9/16" long x 15/16" wide x 9/16" tall Housing: Sealed, waterproof polycarbonate housing Mounting: Surface mount with two-hole installation Wiring: Hard-wired design with single power and ground wire Voltage: 12V Number of LEDs: 2 LEDs Compliance: FMVSS PC-Rated for clearance and marker light applications Warranty: Lifetime LED warranty
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... Features: Oval LED trailer tail lights serves 3 functions when properly mounted Brake light Tail Light Turn Signal Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Polycarbonate lens and housing Recessed mount with included grommets Includes industry-standard 3-prong plugs for connections Specs: Quantity: 2 trailer tail lights Overall dimensions: 7-9/16" long x 3-5/16" tall x 1-3/4" thick Light face: 6-1/2" long x 2-5/16" tall Diodes: 12 6 LEDs per light Powerdraw at 12.8V: Stop/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. ... Features: LED trailer light functions as a clearance light or side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Amber lens over white LEDs Compatible with 12V DC systems Stud mounts to trailer with included stud and stainless steel base 1-Wire design grounds through mounting hardware P2 rated Specs: Dimensions: 2-1/8" long x 1-1/8" wide x 1-1/16" deep Lead wire: 20" long Diodes: 3 Power draw at 12.8V: 0.051 amps Lifetime LED warranty Manufacturer Cross Reference Light will work as an exact replacement for: Bargman # 42-99-402 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6-7/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately) and works with 3-prong plugs.Features: Oval brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting with grommet (A70GB - sold separately) Optional mounting bracket: BK70BB (sold separately) PL-3 connector works with 3-prong plug (A45PB or A47PB - sold separately) DOT compliant Specs: Overall dimensions: 6-7/16" long x 2-1/8" tall x 1-3/4" thick Diodes: 10 Power draw at 12.8V: Stop/Turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs Manufacturer Cross Reference: Light will work as an exact replacement for: Uni bond # LED2238-13R Grote # 53962 Peterson # M420R-2 What Wiring Do I Need?
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.Features: Red, oblong light functions as stop, turn, and tail light Sealed, waterproof housing and lens unit Corrosion resistant 10 Super LEDs (Light Emitting Diode) Flange mounts with four mounting holes in the center of each side Wiring design contains lead wires and a ground wire to mount to all surfaces Wire functions: Red: Turn signal and brake Black: Tail light White: Ground Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Distance between mounting holes (center to center): 7" long x 2-3/4" tall Diodes: 10 Power draw at 12.8V: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers with included bracket. 2-Wire design. 5 Diodes.Features: Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens with white LEDs Steel bracket construction resists corrosion Mounts on surface of trailer with included bracket Installation hardware not included 2-Wire pigtail - includes power lead and ground wire DOT approved Specs: Diodes: 5 Overall dimensions: 8-1/2" long x 3" tall x 2-5/16" deep Distance between mounting holes (center to center): 3-1/2" Power draw at 12.8V: 0.045 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
16" x 1-5/16" x 11/16". Low-profile LED trailer tail light serves as a stop, turn, and tail light for trailers over 80" wide. Surface mount - hardware not included. 3-Wire design.Features: Low-profile trailer tail light serves 3 functions on trailers over 80" wide Stop Turn Tail Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens over red LEDs Compatible with 12V DC systems Surface mount on trailer - hardware not included 3-Wire design hardwires to trailer FMVSS complaint for trailers over 80" wide Specs: Overall dimensions: 16" long x 1-5/16" tall x 11/16" deep Distance between mounting holes (center on center): 14-1/2" Diodes: 11 Power draw at 12.8V: 0.012 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Upgrade your trailer's visibility with this 6" oval red LED stop, turn, and tail light. The surface-mount flange, hardwired 12V-24V design, and polycarbonate lens and housing keep your setup road-ready.Features: 6" Oval LED light provides stop, turn, and tail light functions Red lens and red LEDs give your trailer clear rear-facing visibility 10-Diode design delivers bright light with efficient power draw Surface-mount flange installs directly to your trailer surface Hardwired design includes 5" leads for stop/turn, tail, and ground connections Polycarbonate lens and housing help protect the light during regular road use Compatible with 12V and 24V trailer electrical systems Meets FMVSS S2, T2, and I6 requirements Specs: Light type: LED stop, turn, and tail light Shape: Oval Color: Red Dimensions: 7-9/16" wide x 3-5/16" tall x 3/4" deep Diodes: 10 Voltage: 12V-24V Mount: Surface mount with flange Connection: Hardwired Lead length: 5" Wire functions: Red: Stop/turn Black: Tail White: Ground Amp draw at 12.8V DC: Stop/turn: 0.243 amps Tail: 0.046 amps Lens material: Polycarbonate Housing material: Polycarbonate Weight: 0.265 lbs Warranty: Lifetime LED warranty
This 17' LED light strip has a weatherproof exterior that makes it perfect for indoor or outdoor use. 300 Diodes produce a bright white light. Cut-to-fit installation with peel-and-stick adhesive backing. ... Features: 17' LED light strip provides flexible lighting for indoor and outdoor spaces Sonically sealed, waterproof exterior protects LEDs against the elements LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Simple installation - no drilling required Cut to desired length for application and mount with peel-and-stick adhesive backing Hardwires to any 12-volt power source with 2-Wire pigtail Specs: Light color: white Overall length: 17' Width: 3/8" Number of diodes: 300 Power draw at 12V: 2.7 amps Lifetime warranty on LEDs
17" x 1-3/8" x 1". Waterproof LED combination trailer tail light acts as a brake, tail, and turn signal when properly mounted. Durable polycarbonate housing and lens. ... Features: Low-profile LED trailer light serves 3 functions: Stop Turn Tail Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technolgy (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Surface mount - hardware not included 3-Wire design Specs: Overall dimensions: 17" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 16-1/8" Diodes: 11 Power draw at 12.8V: Stop/turn: 0.350 amps Tail: 0.022 amps Quantity: 1 light Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. ... Features: LED trailer light functions as a clearance light or side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Stud mounts to trailer with included stud and stainless steel base 1-Wire design grounds through mounting hardware P2 rated Specs: Dimensions: 2-1/8" long x 1-1/8" wide x 1-1/16" deep Diodes: 3 Power draw at 12.8V: 0.051 amps Lifetime LED warranty Manufacturer Cross Reference Light will work as an exact replacement for: Bargman # 42-99-402 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.And if you want to be able to control the brightness of the light, you can connect it to an LED-compatible dimmer switch (not included).
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. Hardwires with the 3-wire pigtail.Features: Oval brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Surface mount with built-in flange Hardware not included Optional snap-on reflector trim ring: A78RXB (sold separately) 3-Wire pigtail hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center on center): Horizontal: 7" Vertical: 2-3/4" Compatible with 12V DC systems Diodes: 6 Power draw at 12 volts: Brake/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Great for Temporary Use: Ideal for flat towing or when trailer lights aren't working. Bright LEDs: Sealed LED lamps shine clearly and resist water and dust. Specs Functions: Stop, turn, and tail lights Operation: Transmitter plugs into vehicles 4-way to send signals wirelessly Lamps mount with magnetic bases Materials: Polycarbonate lens and housing Electrical: Voltage: 12.8 VDC Current draw: 0.360 A stop/turn, 0.030 A tail Weight: 3-1/2 lbs Lamp Housing Dimensions: 3-7/8" x 2-3/16" x 6" Light Dimensions: 7-1/2" Long x 4-1/2" tall x 2-3/4" deep Mounting: Magnetic base Wiring Colors: White: ground Brown: tail Yellow: driver stop/turn Green: passenger stop/turn
4" x 1-3/4". Compact LED trailer light with chrome-plated housing illuminates your license plate. Surface mount to trailer with stainless steel mounting ears. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Snap-on chrome housing Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer with stainless steel mounting ears - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 4" wide x 1-3/4" tall x 2-3/16" long Distance between mounting holes (center on center): 3-1/4" Diodes: 5 Power draw at 12.8V: 0.054 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Peterson # 4365X
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.Features: Oval trailer tail light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in flange - hardware not included Meets FMVSS 108 requirements in any 360 degree position 3-Wire design Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" deep Mounting hole dimensions (center on center): 7" long x 2-3/4" tall Diodes: 10 Power draw at 12.8 volts: Stop/Turn: 0.243 amps Tail: 0.46 amps Quantity: 1 clearance/marker light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2" Diameter round. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Durable polycarbonate housing. Flush mount with grommet (sold separately). ... Features: Round LED trailer light functions as a clearance light or a side marker when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC electrical systems Flush mount to trailer with grommet (A54GB - sold separately) Accepts industry standard 2-prong plug (A46PB or A86PB - sold separately) DOT compliant P2 rated Specs: Dimensions: 2" diameter x 1" thick Diodes: 3 Power draw at 12.8V: 0.06 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # LED2000-4R Truck Lite # 30250R Grote # 47112 Peterson # M164R Maxxima # M30250R Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Add compact side marker or clearance lighting with this 3/4" round yellow LED light. It includes a grommet, hardwired 7-1/2" leads, and a durable polycarbonate lens and housing for road-ready visibility.Features: 3/4" Round LED light works as a marker or clearance light Yellow lens and LED provide visibility for front or side applications Single-diode design gives you compact lighting with low power draw Included A11GB grommet creates a clean, secure mount Hardwired 2-wire design connects directly to your trailer or vehicle wiring Black wire connects to power and white wire connects to ground Polycarbonate lens and housing help resist damage from regular road use Compatible with 12V and 24V electrical systems Meets FMVSS PC requirements Specs: Light type: LED marker/clearance light Shape: Round Size: 3/4" Color: Yellow Dimensions: 3/4" wide x 3/4" tall x 15/16" deep Diodes: 1 Voltage: 12V-24V Mount: Grommet mount Included grommet: A11GB Connection: Hardwired Lead length: 7-1/2" Wire functions: Black: Power White: Ground Amp draw: 0.052 amps FMVSS rating: PC Lens material: Polycarbonate Housing material: Polycarbonate Weight: 0.022 lbs Warranty: Lifetime LED warranty
7-9/16" LED turn and parking light is waterproof, and mounts to the surface of your trailer with the built-in flange so you don't need to cut a hole in your trailer. ... Features: Oval turn signal/parking light Brightens for parking light Flashes for turn signal Waterproof - great for boat trailers White LEDs with amber lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surface mount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" wide x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center on center): Horizontal: 7" Vertical: 2-3/4" Compatible with 12V DC systems Diodes: 10 Power draw at 12.8 volts: Turn signal light: 0.243 amps Parking light: 0.046 amps Lifetime warranty on LEDs How to Mount Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout.
5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong plug.Features: Red round trailer light serves 3 functions on trailers Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens over white LEDs Mounts on trailer with built-in flange - hardware not included Requires a 4-1/2" round hole for installation Accepts industry standard 3-prong plug (A45PB and A47PB - both sold separately) DOT compliant Specs: Dimensions: 5-1/2" diameter x 1-15/16" thick Distance between mounting holes (center on center): 4-1/4" Diodes: 10 Power draw at 12.8V: Stop/turn: 0.413 amps Tail: 0.0.26 amps LIfetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 44326R Grote # 53292 Peterson # M418R-2 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Filters
