... Incandescent trailer light illuminates your license plate. Black polycarbonate housing has a built-in bracket for surface-mount installation. 2-Wire pigtail with power and ground wires. Clear lens.Features: Light angles down to illuminate your trailer's license plate Black polycarbonate housing Clear lens Incandescent bulb is replaceable Mounts on surface of trailer with built-in ear-mountbracket 2-Wire pigtail with power and ground wires Specs: Dimensions: 4" long x 1-9/16" tall x 2-5/8" deep Mounting hole dimensions (center to center): 3-7/16" Bulb type: 194 wedge Power draw at 12.8 volts: 0.2 amps 3-Year warranty License light is a direct replacement for: Uni Bond LP1001 Truck Lite 26336 Grote 60251 Bargman 30-30-002
Establish a secure connection between your trailer and semi or other tow vehicle with this heavy-duty, 7-pole RV blade-style socket and mountingbracket.Features: Heavy-duty, 7-pole, RV blade-style socket connects tow vehicle to trailer Zinc, die-cast housing for durability Maximum amperage: 35 Includes mountingbracket and hardware 12-704 Pollak RV 7-Blade Plug End Socket with Bracket
This kit provides a 7-pole, RV-style trailer connector, wiring harness and mountingbracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.Features: Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mountingbracket High-impact nylon construction Resists corrosion 4' Long wiring harness Hard-wires into vehicle wiring system Has 1/2" convoluted tubing Forms weathertight seal on back of socket Keeps out moisture Prevents corrosion Includes color-coded, 7-wire leads that meet RVI standards Right-angle mountingbracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating Protects against rust and corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty
... Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire pigtail. P2 rated.Features: Dual-face LED trailer light installs on your trailer fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket 2-Wire pigtail with power lead and ground wire P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 fender light Dimensions with bracket: 3-3/4" long x 7/8" tall x 13/16" thick Distance between mounting holes (center on center): 3" Diodes: 2 Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-3/8" Long x 2-1/2" tall. Black molded bracket holds your trailer's standard size license plate. Built-in LED light illuminates plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.Features: License plate bracket secures and illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable black molded plastic construction Clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer - mounting hardware not included 2-Wire pigtail includes power lead and ground wire SAE compliant Assembled in the USA Specs: Dimensions: 8-3/8" long x 2-1/2" tall x 2-1/2" deep Distance between mounting holes (center to center): 3" Power draw at 12V: 0.35 amps Wire lead length: 7" Voltage: 14 volts Wattage: 4.9 watts Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
... ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with built-in license plate bracket. 3-Wire pigtail.Features: Rectangular RV tail light serves 4 functions Stop light, tail light, turn signal light, and license plate light Built-in license plate bracket allows easy mounting of license plate ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable white ABS plastic base Red acrylic lens can be easily replaced Clear lens for license plate light Mounts on surface of trailer - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: driver's side (left-hand side) Passenger's-side light (RVSTL0060) sold separately Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" deep Height with license plate bracket: 5" Power draw at 12.8 volts: Stop/turn signal light: 0.34 amps Tail light: 0.094 amps Quantity: 1 Lifetime warranty on LEDs
Hey David! The Curt Cargo Bag #C18211 can be used with the 22x60 Flint Hill Goods Cargo Carrier #FHG49ZR. However, the bag itself is 22" wide, while the cargo carrier has an inside width of 20-1/2". You will be able to sit it down inside…
With Curt Trailer Hitch Receiver #C15302 installed on a 2003 Chevy Silverado 2500 short bed the hitch will be in the same position as a factory hitch or at least within a fraction of an inch. By that I mean the receiver will be right under the rear…
In regards to the Curt Trailer Hitch Receiver part #C15302 which is a fit for a 2001 Chevrolet Silverado 2500 HD - 6-1/2 Foot Bed, there are only two factory weld nuts in the frame which get reused, they are the two closest to the bumper. The other…
Hey Mark, so the Curt hitch part #C15302 basically is strong enough without attaching to the bumper so it wasn't designed into it. Curt is very thorough with their hitch designs so I would not worry about this hitch not having the needed…
Yes, the Curt T-Connector #56407 will require you to route a power wire from the black module box to the battery on your 2024 Jeep Wrangler. I know it isn't convenient, but it's the best setup when it comes to a trailer wiring harness since…
Hey Keith. For a plug and play wiring harness that fits your 2023 Jeep Wrangler JL, you'll want the Curt T-Connector Vehicle Wiring Harness item #56407. This custom-fit T-connector plugs into your Jeep's wiring harness, which is located…
The Air Lift 1000 Air Helper Springs for Coil Springs item #AL29PD are a universal fit. I spoke with my rep at Airlift. If the rear coil springs on your 2011 VW Jetta Sport Wagon measure just over 3-1/2" in diameter and 7" in length when…
The Replacement Quick Pins #DE99FR will fit your Blue Ox Alpha 2 Non-Binding Tow Bar #BX7380. This is a much better option than the entire Triple Lug Kit #BX88154 you would have to get from Blue Ox for their specific pins.
I spoke with my Curt representative, who tells me that the front face of the receiver would sit 10-3/4 inches rearward of the rear-most mounting hole. If you find the rear most mounting hole in the underside of the frame member and measure 10-3/4…
Curt Class V hitch #C15300 is a confirmed fit on your 1987 Ford F-150. To help you determine if it will be compatible with your skid plate I went to our warehouse and took a measurement of the hitch to find out the distance from the mounting brackets…
I went out to the warehouse to measure the Curt Trailer Hitch Receiver XD, Class V #C15300 and found that the measurement from the top of the mounting bracket to the top of the hitch cross tube/receiver measured 6-1/4 inches. From the bottom of the…
... Incandescent trailer light illuminates your trailer's license plate. Vibar socket absorbs road shock and vibration. Surface mounts to trailer with powder-coated steel bracket. 1-Wire design. (1) 168 bulb.Features: Compact light illuminates your trailer's license plate Vibar socket absorbs road shock and vibration to prolong bulb life Incandescent bulb can be easily replaced Durable ABS housing and polycarbonate lens Clear lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer with powder-coated mountingbracket - hardware not included Single wire design grounds through mounting hardware Made in the USA Specs: Dimensions: 8-7/8" long x 2-7/8" wide x 2-1/4" thick Distance between mounting holes (center on center): 3-1/2" Bulb type: 168 Power draw at 12V: 0.35 amps Limited 1-year warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. ... Once you've installed the mountingbracket, take the dust cap off the connector. Slide the connector into the mountingbracket until you feel it click into place. Pop the dust cap back on, and you're good to go.
... Trapezoid beam illuminates a wide area. Durable rubber molded housing. Pedestal mount with included bracket and stud. 1-Wire design. (1) 4411 Bulb.Features: Incandescent work light provides bright light for industrial, agricultural, and recreational applications Trapezoid beam illuminates a wide area Incandescent bulb can be easily replaced Durable rubber molded housing provides increased protection against vibration Clear lens over incandescent bulb Compatible with 12V DC systems Pedestal mount with included zinc-plated bracket and stud Swivel bracket allows adjustable mounting position Single wire designs grounds through mounting hardware Specs: Dimensions: 5-15/16" tall x 4-3/4" wide x 2-1/2" thick Light face diameter: 4-3/4" Compatible bulbs: 4411, 4511, H7610, and H7614 Wire length: 10" 1-Year limited warranty
... Incandescent trailer light illuminates your license plate. Surface mounts to trailer with mountingbracket - hardware not included. 2-Wire design. (1) 67 Bulb.Features: Incandescent light illuminates your trailer's license plate Incandescent bulb can be easily replaced Durable grey coated housing Clear lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer with mountingbracket - hardware not included 2-Wire design with power and ground wire DOT compliant Specs: Dimensions: 8-5/8" Long x 3-1/4" wide x 2-5/16" deep Distance between mounting holes (center on center): 6-7/16" Bulb type: 67 Power draw at 12.8V: 0.2 amps 3-Year warranty
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.Features: 7- and 4-Pole trailer connector with mountingbracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant design Includes mountingbracket for easy, snap-in socket installation Black, epoxy-coated steel construction Mounts to bumper with included screws Specs: Application: Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs Can be used to add a connector to 2003 and newer GM pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year limited warranty Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
Tow a trailer with either a 7-way or 4-way plug with this dual vehicle-end connector. Included pigtail harness hardwires into your vehicle and the connector end mates with the 7-pole socket to form a weathertight seal.Features: Dual connector lets you hook up to a trailer with either a 7-pole, RV-style plug or a 4-way flat plug Pigtail harness hardwires into your vehicle and connects to 7-way socket Includes color-coded 7-wire leads and 1/2" convoluted tubing Forms weathertight seal on back of socket to keep out moisture and prevent corrosion Rubber gasket provides excellent weather protection Integrated stainless steel spring lets you easily open and close socket covers High-impact ABS plastic construction is extra durable Sturdy steel mountingbracket installs on bumper with included screws Black epoxy coating resists rust Specs: Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year warranty Wiring Configuration Wire Color Circuit Wire Gauge Red Left turn and stop 14 Gauge White Ground 10 Gauge Blue Electric brakes 12 Gauge Green Right turn and stop 14 Gauge Black Battery 12 Gauge Brown Running lights 14 Gauge Yellow Reverse lights 14 Gauge
One trailer today, another tomorrow? No problem. This adjustable ball mount gives you up to 5" of height adjustment, so it's easy to match different trailer heights without swapping out your entire setup. ... Highlights Match Different Trailer Heights: Up to 5" of adjustment raises or lowers your ball mount position. Switch Heights Quickly: Clevis pins remove and reinstall to reposition the bracket. Secure Each Adjustment: Included cotter pins retain the clevis pins at the selected height.
... Low-profile LED utility light illuminates an area with blue light. Durable white polycarbonate base and acrylic lens. Mounts on surface of trailer - hardware not included. 2-wire pigtail. 16 Diodes.Features: Low-profile utility light illuminates an area with bright blue light Great for marine applications LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable white plastic base with acrylic lens Clear lens over blue LEDs Compatible with 12V and 24V DC systems Mounts to trailer surface - hardware not included Can also be recessed mounted 2-Wire pigtail includes power lead and ground wire Specs: Dimensions: 6-3/8" long x 1-1/16" wide x 5/8" thick Distance between mounting holes (center on center): 5-1/2" Diodes: 16 Limited lifetime warranty
... Simply plug this into your vehicle's OEM USCAR wiring system and mount it with the included bracket.Features: Provides a 4-way and 7-way socket for your trailer connector Fits USCAR-equipped vehicles with factory tow plugs 4-Way flat output connects tail lights, brake lights and turn signals 7-Way RV blade socket adds reverse lights, electric brakes and auxiliary power Rubber gasket keeps moisture and debris out Spring-loaded dust covers keep connectors clean when not in use Pre-greased terminals offer a reliable connection Mountingbracket lets you attach socket to your hitch or bumper High-strength steel has durable, gloss black powder coat Mounting screws included 1-Year limited warranty
Attach your trailer connector mountingbracket to your vehicle without having to drill. Just affix this sturdy steel bracket to your trailer hitch with the included hose clamp, and then quickly and easily bolt on your connector bracket.Features: Attaches to trailer hitch to provide mounting point for 6-pole round or 7-pole round trailer connector bracket (sold separately) Provides space necessary to mount large trailer connector Offers a no-drill solution for mounting your trailer connector bracket Installs with included hose clamp Wrap strap around trailer hitch and through attachment bracket Tighten down for sturdy mounting Constructed of durable steel Resists corrosion with black powder coat Includes hardware for affixing trailer connector bracket Measures 3" wide x 6-1/2" long Limited lifetime warranty Specs: Overall dimensions: 3" wide x 6-5/8" tall x 7/8" deep Diameter of mounting hole: 1" x 1-5/8" Strap length: 14" This will fit around a hitch tube up to 3-1/2" in diameter
Attach your trailer connector mountingbracket to your vehicle without having to drill. Just affix this sturdy steel bracket to your trailer hitch with the included hose clamp, and then quickly and easily bolt on your connector bracket.Features: Attaches to your trailer hitch to provide mounting point for a 4-, 5- or 6-way trailer connector bracket (sold separately) Offers a no-drill solution for mounting your trailer connector bracket Installs with included hose clamp Wrap strap around trailer hitch and through attachment bracket Tighten down for sturdy mounting Constructed of durable steel Resists corrosion with black powder coat Specs: Dimensions: 3" wide x 3-7/8" long 1-Year limited warranty
8-5/8" x 3-1/4". LED trailer light with ABS mountingbracket illuminates your license plate. Durable polycarbonate lens and housing. Surface mount to trailer with bracket. 2-Wire design.Features: LED light illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer with ABS plastic mountingbracket - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 8-5/8" wide x 3-1/4" tall x 2-5/16" long Distance between mounting holes (center on center): 3-3/8" Diodes: 5 Power draw at 12.8V: 0.046 amps Lifetime warranty on LEDs
... Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Durable plastic housing with acrylic lens. Surface mounts to trailer. 3-Wire pigtail.Features: Low-profile LED RV tail light serves 4 functions Stop, turn, and tail Built-in license plate light illuminates trailer license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable ABS plastic base with acrylic lens Red lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: driver side Passenger side: RVSTL10 (sold separately) Light dimensions: 5-15/16" diameter x 1-5/16" thick Height with license plate bracket: 6-3/4" Distance between mounting holes (center on center): 7" Diodes: 8 Power draw at 12.8V: Stop/turn: 0.117 amps Tail: 0.053 amps Lifetime warranty on LEDs Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
... Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Hardwired with 1-prong plug. P2 rated.Features: Dual-face LED trailer light installs on your trailer fender Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket Hardwired with industry standard 1-prong plug P2 rated Specs: Quantity: 1 fender light Dimensions with bracket: 4-1/16" long x 1-1/4" tall x 1-1/8" thick Light dimensions: 3-15/16" long x 1-1/4" tall x 7/8" thick Distance between mounting holes (center on center): 3" Diodes: 10 Power draw at 12.8V: 0.048 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Plastic mountingbracket allows you to surface mount most Peterson stud mount tail lights.Features: Mountingbracket allows you to surface mount most Peterson stud mount tail lights Durable plastic construction flexes with impacts Suface mount design - bracket attaches to trailer Made in the USA Specs: Long bar measures 8-1/2" long Center bracket measures 2-3/4" wide
Steel mountingbracket allows you to surface mount most Peterson stud mount tail lights.Features: Steel mountingbracket allows you to surface mount most Peterson stud mount tail lights Durable powder-coat finish resists corrosion Suface mount design - bracket attaches to trailer Made in the USA Specs: Dimensions: 4-1/2" long x 3" wide x 2-1/8" thick Distance between mounting holes (center on center): 1-3/4"
Mountingbracket allows you to surface mount a Peterson clearance or side marker light. Fits Peterson 154 and 161 series lights.Features: Mountingbracket allows you to surface mount a Peterson clearance or side marker light Fits Peterson 154 and 161 series lights Surface-mount design - hardware not included Made in the USA Specs: Dimensions: 4-1/8" long x 1-1/8" wide x 5/8" thick Distance between mounting holes (center on center): 3"
This flat bracket allows you to surface mount an Optronics 6" oval trailer tail light with no panel cutout required. Durable steel construction.Features: Flat mountingbracket allows you to surface mount an Optronics 6" oval trailer light Durable steel construction Surface mount to trailer frame - no cutout required Requires a grommet (A70GB - sold separately) to mount recess flange mount lights Specs: Dimensions: 8-1/4" wide x 5-3/4" tall x 1/16" thick 3-Year limited warranty
Filters
