Air Lift 1000 Air Helper Springs for VW Jetta Sport Wagon

Question

Question:

Will the al61730 air lift 1000 helper springs fit onto the rear of my 2011 vw Jetta sport wagon?

asked by: Todd S

0

Expert Reply:

The Air Lift 1000 Air Helper Springs for Coil Springs item # AL29PD are a universal fit. I spoke with my rep at Airlift. If the rear coil springs on your 2011 VW Jetta Sport Wagon measure just over 3-1/2" in diameter and 7" in length when fully weighed down these helper springs will fit.

expert reply by: Jerred H

0

Answer 1

You do not need to have a diode between the two 12 volt batteries on your trailer and tow vehicle but it is not a bad idea either. The Roadmaster Single Park Light Diode part #RM-690 will work perfectly for this. The factory 12 volt pin on most 7-way…

view full answer...

Answer 2

Hey Linden, thanks for reaching out. That is a great question actually because the #C59236 and #C59496 are extremely similar. Basically, both are the same kind of universal hardwire 4-flat harness with install kit. The #C59496 is a kit that we…

view full answer...

Answer 3

According to the instructions which I have linked for you for Air Lift suspension enhancement #AL60769, the maximum air pressure is 35 psi and the minimum is 5 psi. Over-inflation and under-inflation can damage the air bags so you will always want to…

view full answer...

Answer 4

I will be happy to help you get everything you will need to tow a trailer and go on the road with your band: except roadies. We are all out of roadies. First, you will need a trailer hitch. I recommend the EcoHitch Hidden Trailer Hitch Receiver -…

view full answer...

Answer 5

Hey Ivan! The Curt #C37RV and TowSmart #TS44ZR probably do sit a little lower than the factory hitch, but it doesn't look like it is a significant amount. The bumper is slightly different with a cutout for the hitch if you have the factory hitch.…

view full answer...

Answer 6

Hey Freddy, that's definitely an interesting situation you've got with the Air Lift 1000 Air Helper Springs for Coil Springs #AL29PD so I did some poking around the internet, and it sounds like it could be a couple of things, but it should be…

view full answer...

Answer 7

Hey Robert, for your 2026 Hyundai Santa Fe XRT the highest capacity hitch we offer is the Curt part #C37RV which is rated for towing up to 4,000 lb. Then to add a 7-way you would need the Curt #C48RV which would then allow you to use the Curt Echo…

view full answer...

Answer 8

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Answer 9

Hey Bryan, congrats on your new SUV. As of (05/13/26) the Curt Hitch item #C82RJ and the Curt 4-Way connector item #C34MJ are the only parts we know of that are going to be coming out for the new 2027 Kia Tellurides. It's super early in the year…

view full answer...

Answer 10

Hey Michael, thanks for the information! To mount your PullRite 2700 Super Slider item #PUL93RR in your 2024 Chevy Silverado 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2505. The B&W item #BWRVK2505 is custom…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

To help prevent rear sag on your 2023 Kia Sportage, I would recommend adding rear axle air helper springs. For your vehicle we have The Firestone Coil-Rite Air Helper Springs #F4176 and The Air Lift 1000 Air Helper Springs for Coil Springs #AL29PD.…

view full answer...

Air Lift 1000 Air Helper Springs for VW Jetta Sport Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching