Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I'd recommend the Ultra-Fab #UF48-979015. These wheels can be through bolted into the underside of the trailer, and the included backing plates can be used to prevent the bolts from tearing through the trailer deck.
view full answer...Well thanks so much for those kind words, and we can help you out here. Since you have a 450 lb loaded tongue weight, the Blue Ox TrackPro #BLU47FR would indeed be rated too highly, but you can actually just substitute a 2-5/16" hitch ball for…
view full answer...We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…
view full answer...We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…
view full answer...Right, the SoftStartRV Soft Start #SSR54FR is a standalone unit you install inline with the AC unit while the SoftStartUp installs inline for the entire RV. The specs are not the same for both, here are the specs SoftStartUp have with their…
view full answer...Hey Mark. The Torflex Lift Kit #DX56CR is specifically for Dexter #11 Torflex axles and would not be compatible with your Lippert Axle. I'm pretty sure at this point Lippert dropped all of their lift kits for torsion axles but if you can send me…
view full answer...Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…
view full answer...Pin box bolt torque is based on the size of the bolts. 1/2 inch Bolts GR5 90 ft-lbs 5/8 inch Bolts GR5 150 ft-lbs 3/4 inch Bolts GR5 275 ft-lbs
view full answer...The best solution to lift a tandem axle trailer like yours 2 inches is the 2 inch lift for tandem axles from Lift Kit #RR23QX. This attaches to the suspension hangers and gives you a safe and very stable 2 inch lift like you are needing!
view full answer...Yes, the Correct Track #RR23QX can increase your wheel spacing and lift the trailer as well. The way the Correct Track #RR23QX aligns the axles is by changing the spacing until they are in alignment. This kit will allow you to move the axle up to…
view full answer...We can definitely narrow it down, but it is difficult to say with 100% certainty what the weight rating is based on those specs. Generally a 6 lug hub will be on axles rated between 5,200 and 6,000 lbs. There are some 3,500 lb axles that use a 6 lug…
view full answer...If you are referring to a lift kit then we have 2 different options for you to choose from if you have a Dexter Torflex axle. If you have a #9 Torflex axle with a 2,000 lb capacity then you want part #K71-723-01. Should you have a #10 Torflex axle…
view full answer...