... Includes SnapJack feet for improved stability and grip on uneven terrain.Features: Scissor jacks help level and stabilize your 5th-wheel, travel, horse, or cargo trailer Large metal feet come with pre-installed SnapPads Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Added height on the SnapJack feet prevents the stabilizers from being over-extended 8-Hole top plates allow for greater adjustability during installation Includes manual crank handle and hardware to install SnapJack feet to stabilizers Added height on the SnapJack feet prevents the stabilizers from being over-extended Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Support capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks SnapJack Quantity: 2 Dimensions: 8-1/8" wide x 2-3/4" tall Weight: 3.8 lbs each Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Perfect for Class A, B, and C motorhomes with Equalizer leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your Class A, B,or C motorhome's Equalizer leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A, B, and Class C motorhomes (see chart below) with Equalizer leveling systems and (4) 10" octagonal jackfeet Dimensions: 13-1/4" long x 13-1/4" wide x 2-3/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for fifth wheels and motorhomes with Lippert leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your 5th wheel or Class A, B, or C motorhome's Lippert leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: 5th-wheel campers and Class A, B, and C motorhomes (see chart below) with Lippert leveling systems and (4) 9" round jackfeet Dimensions: 11" long x 11" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for truck campers with HappiJac camper feet, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. ... Features: Now available for preorder Heavy-duty rubber pads mount onto your Lippert HappiJac Camper Feet to make leveling faster and easier Eliminates the need to crawl under your truck to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Omnidirectional articulation lets the foot pivot up to 10°, helping your feet stay stable on uneven terrain Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Truck campers that use the Lippert HappiJac Camper Feet Dimensions: 7-3/4" long x 7-3/4" wide x 2-3/4" tall
Designed for travel trailers with BAL leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes 4 pads.Features: Heavy-duty rubber pads snap onto your travel trailer's BAL leveling to make leveling faster and easier Eliminates the need to crawl under your trailer to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your trailer Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: travel trailers with (4) 5-1/2" square jackfeet Diameter: 8-1/8" Weight: 3 lbs per pad 2-Year limited warranty Simple, One-Time Installation SnapPads install quickly and easily, and never need to be removed.
Perfect for motorhomes with Quadra BigFoot leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your travel trailer or Class B or C motorhome's Quadra BigFoot leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Travel trailers and Class B and C motorhomes (see chart below) with Quadra BigFoot leveling systems and (4) 7" square jackfeet Dimensions: 9" long x 9" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Great question, Jeremy. The Shadow 2 brake system #RVI94FR is compatible with many hybrids, and the 2023 Ford Maverick uses electric boost or regular vacuum boost brakes, both of which are compatible with the Shadow 2. The only reason a vehicle…
Hey Mark! The Roadmaster Reflex #RM62VR is reactive so it pushes back and helps you stay centered when you start to wander. The Exact Center #RM82RR is proactive so it actively works to keep you centered all the time. Most of our installers prefer…
Hey Darrell, thanks for reaching out! You're going to need the Roadmaster Reflex Steering Stabilizer #RM62VR for your 2025 Ford F-53 chassis. What Class A do you have?
Hey Ronald, based on the part number you mentioned the correct brake assemblies would be the etrailer brake assemblies part #AKEBRK-7-SA which are a self adjusting set that are the correct capacity for the hub/drums that you have.
I have attached for you below the pairing procedure for the Voyager WiSight Wireless RV Backup Camera System part #ASA84YR. Please note, a mistake I have made in the past was applying power to the camera too soon, this cannot be done until the…
I do agree that you have A103 on the core in your X-Cargo roof box. With that said, you will want the Thule Replacement Key #THKEYN103. Thule did help with the production of the Sears X-Cargo roof boxes so their keys do work. However, this is a…
I wasn't able to research a ton about the Atwood OD5001CW Direct Water Heater but I think we still have a great option for you in the Furrion RV Tankless Water Heater part #FR93FR which installs into a opening between 12 5/8”- 12 3/4” tall x 12…
Hey James, welcome back. That B&W item #BWRVK3670 is super reliable but you are not the only one who's had issues with how heavy it is. Love how you have already attempted our go to solution of taking off the lightest portion of the hitch. I…
Yes it does - the Lippert Thin Shade Complete Window Kit #LC806621 does come with the Window Release Keys (which are part #LC429436), as you can see by the cut out of the manual I added for you. The Thin Shade Window Kit #LC806621 also comes with the…
With a 5 1/2 bolt pattern and the outer bearing being an #L44649, you most likely have Dexter's #84 Spindle. This uses the #L44649 (1.063 inner diameter) outer bearing and the #L68149 (1.378 inner diameter) as the inner bearing. This is one of…
Increase the surface area of your camper jack's foot to help prevent sinking and to get added stability. Durable rubber pad easily and permanently snaps into place.Features: Heavy-duty rubber pad snaps onto the foot of your camper jack for extra stability Prevents sinking into soft ground Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal foot from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Helps dampen vibration from inside camper that could cause shifting Built-in drains release moisture to prevent jack foot from corroding Simple, one-time installation Line up the pad beneath your jack's food and lower the foot until the lip on the pad fully engages and locks in place Made in the USA Specs: Application: 5-1/2" round jack foot Diameter: 7-1/4" Weight: 2 lbs 2-Year limited warranty
Perfect for motorhomes with Equalizer leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your travel trailer or Class B or C motorhome's Equalizer leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Travel trailers and Class B and C motorhomes (see chart below) with Equalizer leveling systems and (4) 7" square jackfeet Dimensions: 9" long x 9" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Designed for travel trailers with Lippert Level Up jacks with 5-3/4" to 6" square jackfeet. Sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your trailer's Level Up leveling jacks from Lippert to make leveling faster and easier Eliminates the need to crawl under your trailer to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your trailer Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Travel trailers with Lippert Level Up leveling jacks with 5-3/4" - 6" square jackfeet Diameter: 8-1/2" Height: 2" Weight: 2.8 lbs per pad Includes 4 pads 2-Year limited warranty Foot Pad Consideration SnapPad feet are carefully engineered to snap onto flat landing feet.
Designed for Class C motorhomes and travel trailers, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes 4 pads.Features: Heavy-duty rubber pads snap onto your RV's leveling jacks to make leveling faster and easier Eliminates the need to crawl under your RV to position plastic pads or wood blocks Compatible with Bal, Ultra-Fab, and VIP 3000 leveling jacks and the Bigfoot Hydraulic Leveling System Increased surface area of your leveling jack's feet provides added support for your RV Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class C motorhomes and travel trailers with (4) 6" round jackfeet Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs per pad 2-Year limited warranty Simple, One-Time Installation SnapPads install quickly and easily, and never need to be removed.
Perfect for motorhomes with Lippert leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (2) pads.Features: Heavy-duty rubber pads snap onto your motorhome's Lippert leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in the USA Specs: Application: Class A and Class C motorhomes (see chart below) with (2) 9" round jackfeet Dimensions: 11" long x 11" wide x 2" tall Weight: 5 lbs per pad 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for Class A motorhomes with HWH leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your Class A motorhome's HWH leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A motorhomes (see chart below) with HWH leveling systems and (2) 8" diameter and (2) 10" diameter jackfeet Dimensions: 8" Pads: 10" long x 10" wide x 2 " tall 10" Pads: 11-3/4" long x 11-3/4" wide x 2 " tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for Class A, B, and C motorhomes with HWH leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your Class A, B, or C motorhome's HWH leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A, B, and Class C motorhomes (see chart below) with HWH leveling systems and (4) 8" round jackfeet Dimensions: 10" long x 10" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for Class A motorhomes with Lippert leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your Class A motorhome's Lippert leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A motorhomes (see chart below) with Lippert leveling systems and (4) 11-1/2" or 12" round jackfeet Dimensions: 13-3/4" long x 13-3/4" wide x 2-1/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Replaces 4 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jackfeet to help prevent sinking and provide added stability. Fits 9" round jackfeet.Features: Replaces 4 pads for your SnapPad jack stand pad system Pads increase the surface area of the jackfeet to help prevent sinking and provide added stability Made in the USA Specs: Quantity: 4 pads Application: 9" round jackfeet Diameter: 11" Weight per pad: 5 lbs 2-Year limited warranty
Perfect for fifth wheels and motorhomes with Quadra BigFoot leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your 5th wheel or Class A, B,or C motorhome's Quadra BigFoot leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Fifth wheels and Class A, B, and Class C motorhomes (see chart below) with Quadra BigFoot leveling systems and (4) 10" octagonal jackfeet Dimensions: 13-1/4" long x 13-1/4" wide x 2-1/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Replaces 6 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jackfeet to help prevent sinking and provide added stability. 4 Pads fit 9" round jackfeet. 2 Pads fit 11-1/2" or 12" round jackfeet.Features: Replaces 6 pads for your SnapPad jack stand pad system Pads increase the surface area of the jackfeet to help prevent sinking and provide added stability Made in the USA Specs: Total quantity: 6 pads 4 pads Application: 9" round jackfeet Diameter: 11" Weight per pad: 5 lbs 2 Pads Application: 11-1/2" or 12" round jackfeet Diameter: 13-3/4" Weight per pad: 8.4 lbs 2-Year limited warranty
Perfect for motorhomes with Power Gear or Kwikee leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your Class A or C motorhome's Power Gear or Kwikee leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A and Class C motorhomes (see chart below) with Power Gear or Kwikee leveling systems and (4) 10" concave round jackfeet Dimensions: 13-1/4" long x 13-1/4" wide x 2-3/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for Class A motorhomes with Lippert leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your Class A motorhome's Lippert leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A motorhomes (see chart below) with Lippert leveling systems (2) 9" diameter and (2) 12" diameter jackfeet Dimensions: Pads for 9" foot: 11" long x 11" wide x 2" tall Pads for 12" foot: 13-3/4" long x 13-3/4" wide x 2-1/4 " tall 2-Year limited warranty Note: You will need to measure your jacks to confirm compatibility, as the foot size/shape of the jacks on your leveling system can vary from model to model and year to year.
Perfect for Class A motorhomes with Equalizer leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your Class A motorhome's Equalizer leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A motorhomes (see chart below) with Equalizer leveling systems (4) 11-1/2" or 12" round jackfeet Dimensions: 13-3/4" long x 13-3/4" wide x 2-1/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for Class A and C motorhomes with Equalizer leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.Features: Heavy-duty rubber pads snap onto your Class A or C motorhome's Equalizer leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A and Class C motorhomes (see chart below) with Equalizer leveling systems and (4) 10" round jackfeet Dimensions: 11-3/4" long x 11-3/4" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Designed for motorhomes with older Equalizer leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides more stability on soft ground. Includes 4 pads.Features: Heavy-duty rubber pads snap onto your motorhome's Equalizer leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jackfeet from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in the USA Specs: Application: Class C motorhomes with Equalizer leveling systems and (4) 8" square jackfeet Diameter: 11-1/2" Weight: 5.4 lbs per pad 2-Year limited warranty Note: These pads will only work with older generations of Equalizer leveling jacks that have thin feet and cannot be used on the new, thick-foot models.
Designed for truck campers and travel trailers, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. Includes 4 pads.Features: Heavy-duty rubber pads snaps onto your camper's jacks to make leveling faster and easier Eliminates the need to crawl under your travel trailer to position plastic pads or wood blocks Great for truck camper jacks too Increased surface area of your jack's feet provides added support for your camper Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside camper that could cause shifting Built-in drains release moisture to prevent jack foot from corroding Simple, one-time installation Line up the pads beneath the jackfeet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in the USA Specs: Application: travel trailers and truck campers with (4) 5-1/2" round jackfeet Diameter: 7-1/4" Weight: 2 lbs per pad 2-Year limited warranty Simple, One-Time Installation SnapPads install quickly and easily, and never need to be removed.
Perfect for RVs with Lippert, Pac Rim, or Venture leveling systems, these sturdy rubber jack pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds stability on soft ground. ... Features: Rubber pads snap onto your RV's Lippert, Pac Rim, or Venture leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome or travel trailer to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Heavy-duty rubber construction Grips uneven terrain and prevents metal from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Protects footpads from rocks and roots Helps dampen vibration from inside motorhome that could cause shifting Built-in drain releases moisture to prevent jackfeet from corroding Simple, one-time installation Lower jack foot slightly, insert the foot into the shoe, and use a screwdriver to stretch the rubber as necessary No need to remove and replace pads or carry other jack pads or blocks around with you Made in the USA Specs: Application: 9" round flat jackfeet on Lippert, Pac Rim, or Venture leveling systems Can support a coach up to 100,000 lbs Dimensions of 1 pad: 11" diameter x 2" tall Quantity: 4 pads 2-Year limited warranty
Filters
