Video Transcript for Review of SnapPad RV Jack Pads - Grand Jack Pads 11-1/2 Inch 12 Inch Jack Foot - SN46FR

Hi everybody, Andy here with etrailer.com and today we're gonna take a look at the SnapPad Grand Jack Pads. These four heavy-duty rubber pads are going to snap onto your Class A motor home's equalizer leveling jacks with four 11 and a half inch or 12 inch round jack feet to make leveling faster and easier, eliminating the need to crawl under your motor home to position plastic pads or wood blocks. Now, it is recommended to measure your jacks to confirm compatibility as the foot size and shape of the jacks on your leveling system can vary from model to model and year to year. Now let me go ahead and pull out my tape measure here and just give you the overall diameter of this pad. So again, this is going to fit your 11 and a half inch or 12 inch round jack feet. So lining up my tape measure there, as you can see, we are sitting right around 13 and seven, eight inches in diameter.

And then let me go ahead and lay this down and give you the measurement of the overall height. It looks like we're sitting right at about two and a quarter inches tall. So as you no doubt know, the increase surface area of your leveling jack's feet is going to give you added support for your motor home, preventing sinking into soft ground, unlike smaller metal feet. Now these pads are made here in the U.S.A. of durable heavy duty rubber that's actually made from recycled tires, so they're going to grip uneven terrain and prevent your metal feet from rusting or bending.

The built-in drains are going to release moisture to help prevent your jack feet from corroding and they're also going to serve as a cushion, so your metal feet won't crack or chip away at your driveway and they're going to help dampen vibration from inside of your motor home that could cause shifting. And there's not going to be any need to remove and replace these pads or carry other jack pads or blocks around with you. So this is really going to be a simple, one time installation. You're just going to line up the pads beneath your jack feet and lower each foot until the lip on the pads fully engage and lock into place. You'll actually hear a snapping sound once the pad is securely installed.

Insulation will then be permanent, so once you have the SnapPad secured, you're never going to have to worry about crawling under your motor home to place pads again. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.

.