These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 24". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
Designed to work with your etrailer scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. ... Features: Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Non-slip shank Hex socket measures 3/4" Limited lifetime warranty
Need to replace a worn or damaged drive on your camper jacks? This hex drive gives you an exact-match fit for HappiJac systems, so you can keep lifting and lowering your camper smoothly without any extra hassle.Features: Hex drive replaces the original component on HappiJac camper screw jack systems for proper operation Function allows lifting and lowering of your camper jack system Exact-match design installs like original equipment for a seamless fit Installation process supports quick and easy DIY replacement Corrosion-resistant finish helps protect against wear and environmental exposure Made in the USA Specs: Quantity: 1 drive 1-Year warranty
Hey Greg! Where did your Stromberg Carlson Base Pad Extreme #SC53VR crack? The Andersen Trailer Jack Block #AN39VR is a good alternative. It has the same 6,000 lb capacity and the design is a little more basic/straightforward which makes it less…
The Kenda Karrier ST225/75R15 Radial Trailer Tire - Load Range E #AM10303 would work just fine to replace the Westlake ST235/75R15 tires currently on your trailer but will be about 1/2" narrower and shorter. The #AM10303 has a load rating of…
I have a solution for you but the Reese Weight Distribution w/out Shank #RP66021 that you referenced won't work well for you due to how tall your frame is. So what you'll need to do is install an under slung coupler on your trailer like the…
Transmission coolers make a huge difference in the longevity of a vehicle transmission. Basically the biggest one you can fit will give you the best performance. For your 2019 Chevy Express Van I recommend the Derale cooler part #D13504 which…
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…
Different manufacturers sometimes have different philosophies about the set-up process of a weight distribution system on a vehicle with factory air shocks. I can share with you the process we have found to work well for us when setting up a weight…
Hey Mike, the two Karrier tires part #KE63KV and #AM10303 are very similar but the big difference is the tread pattern. I prefer the part #AM10303 as it is more similar to an automotive type tread pattern but the cost savings of the #KE63KV is pretty…
We don't have a way to look it up but if that 4-way connector came with your 2018 Ford F-150 from the factory then you definitely have the brake controller port. It'll be located below your steering wheel behind the panel on the right. I have…
Hey Donald. The Dexter 072-032-00 is a 26-1/2" long slipper spring, with a hook end, 5-leafs, that works with a 7,000 lbs axle. Our closest option to replacing this spring is the 5-Leaf Slipper Spring for 7,000-lb Trailer Axles - 26-1/2"…
The return spring inside the Bulldog Square Jacks like part #BD182800 are neither replaceable nor repairable according to Bulldog. Therefore, so you will have to replace the entire jack if yours is broken or damaged.
For a Bulldog 180 series jack you will need replacement drop leg pin #BD500177. It includes the spring, cotter pin, and washer. You should not have to remove the inner drop leg to replace the pin and spring. Start by pulling back on the pin. Then use…
Hey Martin, we can definitely help with that. Your exact tire size is only available in an off-road style but the next closest size is the ST225/75R15 which we offer with the #TR225LRE. This would be just a tiny bit smaller than what you have now but…
Designed to work with most scissor jacks, this unique T-slot drill attachment is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. ... Features: T-slot attachment lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Lifetime warranty
Your arm stalls mid-crank with a loaded tongue. Been there. This A-frame jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. You raise and lower smoothly without fighting the handle, and hitching doesn't drag on.With that added footprint, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched. Specs Capacity and Lift: Maximum capacity: 2,000 lbs Maximum travel: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Operation: Handle: sidewind, fold-down for power drill access Drilladapter: 3/4" integrated nut and 3/4" socket included Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drill operation Warranty: Limited lifetime
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. ... Features: Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Non-slip shank Hex socket measures 3/4" 2-Piece construction Lifetime warranty
Cranking a trailer jack by hand gets old fast, especially in the heat, cold, or mud. This gearbox adapter lets you use your drill with compatible Dutton-Lainson hand-crank jacks, so you can raise and lower your trailer faster with less effort.Manual Backup Ready: Attach a handle anytime for standard hand operation. Built for 1,500 to 2,000 lbs Jacks: Designed for compatible Dutton-Lainson hand-crank models. Features to know about Convert to Drill-Assisted Operation This gearbox adapter upgrades select Dutton-Lainson hand-crank trailer jacks for drill-assisted use.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drilladapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The finish holds up through repeated raising and lowering, so the jack stays functional instead of locking up when you need it. Specs Capacity and Lift: Maximum capacity: 2,000 lbs Maximum travel: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Operation: Handle: sidewind, fold-down for power drill access Drilladapter: 3/4" integrated nut and 3/4" socket included Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drill operation Warranty: Limited lifetime SnapPad Jack Stand Pad: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs Warranty: 2-Year Included Components: etrailer Manual Sidewind Trailer Jack w/ DrillAdapter - A-Frame - 14" Lift - 2K Replacement Pad for SnapPad Jack Stand Pad System - 6 Round Jack Foot
Tired of cranking your jacks by hand? This drilladapter turns your drill into a 3/4" socket driver so you can speed through RV leveling with way less effort and get set up faster at your campsite.Features: Drilladapter converts a standard drill into a 3/4" socket driver for faster RV leveling Time-saving design helps speed up raising and lowering stabilizer jacks Attachment installs quickly and easily for simple setup and use Compatibility works with most drills that accept standard driver bits Compact size makes it easy to store with your RV tools and gear
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when drop leg is released Drop leg helps bridge the gap to the ground Works as a powered jack when used with an 18V or 24V, cordless, non-impact drill (not included) Included drilladapter attaches to jack in place of handle and eliminates need to manually crank Resists rust and corrosion, even in areas with salt Wrinkled black powder coat finish has a 700-hour salt spray rating Zinc-nickel inner and outer tubes Won't shake, rattle, or overheat during operation Durable, precision-machined tubing limits rattle Composite gears dissipate heat Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Can be used as manual jack with included, sidewind handle Offers a comfortable rubber grip Easily removes for storage so you can use the drilladapter Lasts for years thanks to durable steel construction Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around the trailer frame Includes mounting hardware Specs: Application: trailer frames up to 6" tall x 6" wide Installation requires 5" of clearance along the trailer frame Lift capacity: Manual: 1,800 lbs With drill: 900 Support capacity: 7,000 lbs Bracket height (from center of top bracket hole to the ground): Retracted: 13-5/8" Extended: 40-15/16" Total lift: 26-5/8" Screw travel : 13-5/8" Drop leg travel : 13" Adjustment hole spacing on drop leg: 3-7/16" from center of hole to center of hole Clearance: 16-1/2" from mounting bracket to top of jack Inner tube dimensions: 2" x 2" Outer tube dimensions: 2-1/4" x 2-1/4" Gear ratio: 3:4 1-Year limited warranty Drill Powered Operation When you're hitching up before a long day of work, or putting away your trailer before turning in for the night, you want to be able to do it with as little effort as possible.
The trailer's loaded, sun's hot, and the crank feels heavy. Skip the shoulder workout. Grab your drill, drop the leg, and lift the trailer without breaking a sweat. When it's time to tow, the jack swings up and stays out of the way.Tough Powder-Coated Finish: Wrinkle black coating helps protect against rust, chips, and grime. Features to Know About Power It Up With a Drill This jack is built to work with the cordless drill you already own. It comes with a custom socket adapter that fits most standard drills, so there's no need to buy extra tools.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Features: Supports, lifts, and lowers your boat or recreational trailer Works as a powered jack when used with an 18V or 24V, cordless, non-impact drill (not included) Included drilladapter attaches to jack in place of handle and eliminates need to manually crank Stows safely and out of the way for travel Locks into place when stowed parallel to tongue Spring-loaded pull pin lets you position jack quickly Won't shake, rattle, or overheat during operation Nylon sleeve fitting between tubes ensures a smooth glide Durable, precision-machined tubing limits rattle Composite gears dissipate heat Can be used as manual jack with included, sidewind handle Offers a comfortable rubber grip Easily removes for storage so you can use the drilladapter Includes footplate to minimize sinking in soft ground Upgrade to a caster wheel (TV89FR - sold separately) so you can easily move your trailer Resists rust and corrosion, even in areas with salt Wrinkled black powder coat finish has a 700-hour salt spray rating Zinc-nickel inner and outer tubes Submersible in saltwater Lasts for years thanks to durable steel construction Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around the trailer frame Includes mounting hardware Specs: Application: trailer frames up to 4-3/4" tall x 3-3/4" deep Installation requires 8" of clearance along the frame to install the bracket Lift capacity: Manual: 1,600 lbs With drill: 800 lbs Support capacity: With footplate: 5,000 lbs With wheel: 1,200 lbs Bracket height (from center of bracket to the ground): Retracted: 11-1/2" Extended: 25-1/2" Screw travel : 14" Clearance: 14" from mounting bracket to top of jack Distance between mounting holes: Vertically: 1" apart on center Horizontally: 5-1/2" on center Inner tube diameter: 2" Outer tube diameter: 2-1/4" Gear ratio: 12:16 1-Year limited warranty Drill Powered Operation When you're hitching up before a long day of fishing, or putting away your boat before cleaning your catch, you want to be able to do it with about as much effort as casting a line.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Features: Supports, lifts, and lowers your boat or recreational trailer Works as a powered jack when used with an 18V or 24V, cordless, non-impact drill (not included) Included drilladapter attaches to jack in place of handle and eliminates need to manually crank Stows safely and out of the way for travel Locks into place when stowed parallel to tongue Spring-loaded pull pin lets you position jack quickly Won't shake, rattle, or overheat during operation Nylon sleeve fitting between tubes ensures a smooth glide Durable, precision-machined tubing limits rattle Composite gears dissipate heat Can be used as manual jack with included, sidewind handle Offers a comfortable rubber grip Easily removes for storage so you can use the drilladapter Includes caster wheel so you can easily move your trailer Resists rust and corrosion, even in areas with salt Wrinkled black powder coat finish has a 700-hour salt spray rating Zinc-nickel inner and outer tubes Submersible in saltwater Lasts for years thanks to durable steel construction Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around the trailer frame Includes mounting hardware Specs: Application: trailer frames up to 4-3/4" tall x 3-3/4" deep Installation requires 8" of clearance along the frame to install the bracket Lift capacity: Manual: 1,600 lbs With drill: 800 lbs Support capacity: With footplate: 5,000 lbs With wheel: 1,200 lbs Bracket height (from center of bracket to the ground): Retracted: 11-1/2" Extended: 25-1/2" Screw travel : 14" Clearance: 14" from mounting bracket to top of jack Distance between mounting holes: Vertically: 1" apart on center Horizontally: 5-1/2" on center Inner tube diameter: 2" Outer tube diameter: 2-1/4" Gear ratio: 12:16 1-Year limited warranty Drill Powered Operation When you're hitching up before a long day of fishing, or putting away your boat before cleaning your catch, you want to be able to do it with about as much effort as casting a line.
You just backed your rig in, it's hot, and you aren't in the mood to crawl around in the gravel. Sound familiar? Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.Specs Dimensions: Retracted: 76-5/8" long x 14" wide x 6-1/4" tall Extended: 76-5/8" long x 14" wide x 26-5/8" tall Extension: 20-1/4" Footplate dimensions: 7-1/2" long x 4" wide Drill Compatibility: Cordless, non-impact drill: 18V to 24V Includes socket-bit adapter Mounting: Bolt-on installation Requires (4) 1/2"-13 bolts (typically 2"-3" long), plus washers and nuts Compatible with most trailer frame widths Weight Capacity: Stabilizes your trailer, but isn't built for lifting or leveling.
Adapter lugs let you attach your JT's Strong Arm stabilizers to hydraulic jacks. Can be welded or bolted onto the round footpads of your landing gear.Features: Adapter lugs let you attach the feet of your hydraulic landing gear jacks to your JT's Strong Arm stabilizers Each lug allows for attachment of 1 stabilizer Weld-on or bolt-on installation Lugs attach to the round footpads on your landing gear 2 Lugs and mounting bolts included 1-Year warranty
Adapter kit lets you attach your JT's Strong Arm stabilizers to electric landing gear jacks. Bolts onto the round footpads of your landing gear. ... Features: Adapter kit lets you attach the feet of your electric landing gear jacks to your Lippert Components JT's Strong Arm stabilizers Plates mount on either side of jack to allow for installation of swing bolts Bolt-on installation Includes 4 jack pad adapter plates 1-Year warranty
Install a Fulton F2 jack onto your trailer's existing Fulton XP10 or XP15 jack mount. Simply bolt this adapter plate onto your welded-on mount. Sharkskin finish resists corrosion. 1/2" Pull pin hole.Simply remove your old jack from the XP mount and bolt on this adapter plate in its place with the included hardware. Installation To install the Fulton jackadapter kit, first you will need to use a 3/4" wrench to remove the locknut from your existing XP jack swivel assembly.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.The jack slides on and off the mount for transport or security, and it comes with a Trailer Valet drill attachment that works with your cordless drill.
Pull in, drop the jack, and adjust your height without slowing down. Use a drill for quick changes, then switch to the crank when you need full 14,000 lb lifting power. ... Features to know about Drill For Speed Or Crank For Full Power Use a standard 18V to 24V drill to quickly raise or lower your trailer for everyday setups up to 5,000 lbs.
This Trailer Valet drill powered direct weld trailer jack is rated for 10,000 lbs static load, providing manual or drill operation to raise or lower a trailer with reduced effort.Features: Dual operation with manual hand crank and compatibility with standard 18 to 24 V drills using a drill attachment Direct weld mount designed for permanent attachment to the trailer frame Patented gear system engineered for efficient operation Weather resistant finish for protection against corrosion Includes footplate or base plate for additional stability Specs: Static load capacity: 10,000 lbs Mount style: Direct weld Total height adjustment: 27-7/8" Screw travel: 14-1/2" Drop leg travel: 13-3/8" in 3-3/8" increments Total retracted height: 25-1/2" Total extended height: 53-1/2" Outer tube dimensions: 3-3/16" x 3-3/16" Inner tube dimensions: 2-3/4" x 2-3/4" Leg dimensions: 2-3/8" x 2-3/8"
This JXC A-frame trailer jack features a manual hand crank, but can also be powered by any 18-volt to 24-volt compact drill when using the included attachment. Great for boat or cargo trailers. ... Features: Utility jack lets you raise and lower your A-frame trailer Drill power option Compatible with any 18-volt to 24-volt drill using the included drill attachment Footplate minimizes sinking in soft ground Patented gear material composition delivers maximum efficiency while reducing heat retention Wrinkle black powder coat offers weather resistance Specs: Bracket height: Retracted: 9-1/2" Extended: 23-1/2" Travel: 14" Clearance: 13-1/2" from mounting bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Lift capacity: Manual: 1,600 lbs With drill: 800 lbs Support capacity: With footplate: 5,000 lbs With wheel: 1,200 lbs Jack height adjustment range: 23" - 37" Gear ratio: 12:16 1-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Filters
