What Is the Proper Oil for Oil Bath Hubs on Trailer Axles?
Updated 05/08/2018 | Published 05/06/2018
Products Featured in This Question
Question:
What is the proper gear oil to put in my 9,000 lb. oil bath axle.
asked by: Nick M
0
Expert Reply:
I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle # XLPROLUBE. It is a 90 weight synthetic oil. Dexter bought out Kodiak so this meets their specifications.
I've also attached a photo of Dexter's recommended Oil Specs to assist.
expert reply by:
Jason S
0
click to enlarge
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Idler Hub
- Oil Bath
- 387A / 25580
- Standard Grade
- For 9000 lbs Axles
- For 10000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: hydraulic jack
- Search Results: trailer bearings races seals caps
- Search Results: drop leg jack
- Search Results: trailer jack
- Search Results: dexter 10k brakes
- Search Results: 9 123 drum
- Search Results: 9~123
- Shop: Trailer Wiring
- Shop: Electric Trailer Brake Assembly for Lippert ABS Hubs - 12" - Left/Right Hand - 5.2K - 7K
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Q&A: What Is The Correct Oil To Use In My Dexter Axles With Oil Lube Bath Hubs?
- Shop: Caliber Trailblazer ORV Tie Down Kit - 3,300 lbs - 4 Anchors
- Shop: Atlas IV 10K Hydraulic Trailer Jack w/ Connection Kit for Dump Trailer - Direct Weld - 60"
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Shop: Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End
- Shop: Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Video: Review of Stillwell Trailer Jack - Jack Direct Weld 10K Conversion Kit - ST24VR
- Video: Review of Stillwell Trailer Jack - Jack Direct Weld 10K 60 inch Conversion Kit - ST37VR
- Shop: Trailer Hitch
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: Replacement for 3,500 lb Axle With 92-1/2 Inch Hub Face Measurement
- Q&A: Troubleshooting EOH Actuator That Will Not Release Brakes
- Q&A: Does Trailer Brake Controller Require Relay Installed
- Shop: Gooseneck Hitch
- Video: Install: etrailer Trailer Hitch Receiver on a 2020 Hyundai Santa Fe
- Q&A: Troubleshooting the e2 Error Code on a Hopkins Reliance Trailer Brake Controller
- Q&A: Do Dexter 10k Brake Assemblies Fit 10k Lippert Axle
- Shop: Brake Controller
- Video: Buyers Products Tail Light Mounting Box Spec Review
- Video: Ultimate Overview of the Dexter Fortress Threaded Aluminum Oil Cap for 5.2K to 8K Axles
Explore Expert Info
![Our Expert]()
on Trailer Hubs and Drums
on Trailer Hubs and Drums
