Amp Draw On 2,000 lb etrailer Electric Trailer Jack

Question

Question:

What is the amp or wattage usage of this product. I would be hooking this up to a Li time 100ah lithium battery

asked by: Helbert

0

Expert Reply:

Hey Helbert! The etrailer Electric Trailer Jack # e64GV draws approximately 27 to 30 amps under load. A 100Ah LiTime lithium battery will have no problem powering this jack for normal operation, and will provide plenty of capacity for repeated raising and lowering of your trailer.

What kind of trailer do you have?

expert reply by: Robin H

0

etrailer Electric Trailer Jack
(click to enlarge)

Brandony

7/6/2026

What size amp breaker should I use?

Robin H.

7/6/2026

@Brandony a 30A auto-reset circuit breaker is what I recommend for the # e64GV.

Answer 1

Hey Perry! Sometimes they can have a different brake flange but they typically follow the standard for 3,500 lb. Can you send me a picture of your axle tag, or at least get the serial number off of it for me? If I have that I can make sure we get you…

view full answer...

Answer 2

We have it, the etrailer Hub and Drum #AKHD-655-35-EZ-K, listed out for a 3,500 lb axle (and we break the math down on the product page) but when it comes to the hub side of things it's more about making sure it physically fits so since the…

view full answer...

Answer 3

The correct hub and drum assembly replacement for your Lippert 4,400 lb axle is the #8-407-5UC3-EZ. This comes with bearings and a grease seal. If you need brakes as well you can use the #LC66WD, or for self-adjusting brakes #K23-478-479.

view full answer...

Answer 4

That is a Timken seal with the part number 171255TC, so you can use the Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 1 #58846 as the replacement or you can get a pair with part #RG06-050.

view full answer...

Answer 5

Hey Mike, the good news is that basically all electric a-frame jacks are made the same so any of the ones we carry like the etrailer jack part #e64GV would fit and work great. This is an entry level electric jack that will get the job done but it…

view full answer...

Answer 6

We have a TruRyde brand that will fit as a replacement for what you have. For a pair, you would need #RG06-050. Or for one double lip seal, #58846. To be sure, you can check the measurements of your seal. The measurements will have to be as accurate…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Amp Draw On 2,000 lb etrailer Electric Trailer Jack

Continue Researching