Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. ... Features: SnapJack foot improves the stability of your stabilizer jack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Get more traction and stability for your camper's scissor jack by snapping these durable, molded rubber pads onto the base. Fits almost any scissor jack with a bowtie base and installs permanently so you never have to find a spot to store it.Features: Snaps onto the base of your scissor jack for added traction and stability Increases surface area to help prevent sinking into soft ground Grips uneven terrain and prevents metal from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Protects footpad from rocks and roots Won't crack, break, or crumble Molded EPDM rubber is more durable than crumb rubber Has built-in drain holes to release moisture, helping to prevent corrosion Installs permanently - no need to remove and store Just pop the shoe on, use a screwdriver to stretch the rubber over the base, and secure with included ties Made in the USA Specs: Application: 2,500-lb to 9,000-lb scissor jacks with bowtie bases Base dimensions: 8-3/4" long x 4-3/8" wide Adapters included to fit 8" long bases External pad dimensions: 11" long x 6-1/2" wide Quantity: 2 pads 2-Year limited warranty
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
The hydraulic bottle jack lifts, holds, and locks vehicles in place without jack stands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.After you have the vehicle lifted to the desired height, the jack will automatically lock into place. The Unijack will then double as a jack stand to support the lift. To unlock the jack, simply turn the lever at the base of the piston counterclockwise and the hydraulics will slowly move in a downward motion.
... Heavy-duty jack screw can lift up to 5 tons.But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
Hey David! That isn't the main purpose of the Softride Shuttle Pad Tailgate Pad #SR26457 but it will protect your tailgate while it is down. Keep in mind, you probably won't get 100% coverage, particularly on the sides. This is 61" wide…
Hi David! The Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to 26-3/4" Lift - 2 Tons #PM44FR weighs just over 15 pounds (15.09 to be exact). In case you were curious about the weight of the other two Tallboy bottle jacks we carry,…
The portion of the rear hanger with TOP labeled on it will get welded to the trailer frame. I am including a picture of the hangar that shows the top marking and how it is positioned on the trailer. I attached an FAQ on trailer suspension for you to…
Hey Bert congrats on the new trailer. We don't carry a specific tire changing kit let alone one that can be bolted to the side of the trailer. Nor do I know of one that exists. We do have the necessary parts though and I have a storage solution.…
Hey, Ted. The best weight I can give you for the Power Mountain Tallboy bottle jack, part #PM34FR, is it's shipping weight, which is 27 lbs. That includes packaging so it will weigh slightly less then that. Curiosity is having me ask if there was…
Hey Andersen, without any type of attachment installed on the Power Mountain TallBoy Off Road Bottle Jack part #PM34FR the height is 9 inches when fully retracted and then 15 when extended. The lift range is right around 6-1/2 inches. Would that work…
Hey Pavel. The only tow capable hitch we have for your 2025 Mercedes AMG GLE 53 is the Stealth Hitches item #SH62TR. The Draw-Tite item #DT75GR you were looking at doesn't fit the AMG body style. The Stealth Hitches item #SH62TR comes with…
Hi Christopher! If you’re measuring 10-1/2" center-to-center on the mounting holes, the Dexter Torflex Lift Kit #K71-725-02 is very likely not going to bolt up to your brackets as-is. That kit is made specifically for Dexter #12 Torflex torsion…
Definitely, Mike. The 12-ton Tallboy #PM94FR has more than enough power for your dually’s front axle. The main thing to check is clearance - it needs about 11-1/4 inch minimum height to fit, so measure under your lower control arm or frame first.…
Hey Mike! The Power Mountain Tallboy Off-Road Bottle Jack #PM34FR can be stored in that manner (with the oil plug facing up), but my contact at Power Mountain stressed that it should only be done for a short period of time, so I recommend setting it…
Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.How to Pick the Right Trailer Jack Capacity Your jack needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer weighs 10,000 lbs fully loaded, your tongue weight will typically be around 1,000 to 1,500 lbs.
Ever get to the end of a long day with a tired back and sore arms, and there's still a heavy trailer sitting on the ball? Press the button and this jack lifts the trailer, saving you from cranking so you can unhook and call it a day.Holds Up Through Weather and Long Weeks: Protected housing keeps the jack working through rain, cold starts, and heavy use. Features to know about Hydraulic Lift Without the Wear and Tear When the tongue is loaded or you're hooking up after a long day, this jack saves your back and your patience.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.How to Pick the Right Trailer Jack Capacity Your jack needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer weighs 6,000 lbs fully loaded, your tongue weight will typically be around 600 to 900 lbs.
When you're done cranking a manual jack or your trailer needs hydraulic lift added to the setup, this bolt-on kit gets you there. It mounts to the frame, ties into your pump, and comes with the hoses and fittings you need.Features to know about Hydraulic Lift Without the Manual Work If you're ready to stop cranking a loaded trailer, this jack ties into your pump and uses hydraulic power to do the lifting. One press gets the tongue where it needs to be without wearing out your shoulders at the end of the day.
Smooth and powerful hydraulic jack lifts your heavy load without your help. Just press the button on the corded remote control to lift and lower your trailer. The large, pivoting foot pad stabilizes the jack even on rough terrain.Features: Hydraulic jack Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Smooth and effortless operation, even for heavy loads Self-contained pump and power unit comes attached to the jack Convenient corded remote control switch Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs 500W 12V DC dual motor Reservoir capacity: 2.5 quarts Maximum pump load: 3,000 psi Working pressure: 1,500 psi Mounting tabs: 7-1/2" x 4" Foot pad: 10" long x 10" wide 1-Year warranty
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion External gearbox is easily accessible Effortless greasing with built-in grease zerk Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 8-3/8" Retracted 24" Extended Travel: 15-5/8" Clearance: 15" from bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. ... In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Warranty: Limited lifetime warranty Specs: Lift: 18" Lift capacity: 3,500 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Total travel: 28-3/4" Screw travel : 15" Drop leg travel : 13-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Filters
