11" Wide x 43-1/8" long x 12-1/2" tall. These fenders are made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirts help contain road debris.
Trailer axle measures 49-1/2" from hub face to hub face and 38-7/16" from Spring center to spring center. Includes fully pre-assembled studded hubs. Made for a 40" frame.
40-1/8" Long x 10" wide x 10-1/4" tall. These fenders are made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirts help contain road debris.
Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. Zinc plating resists rust and corrosion - great for boat trailers.
Mount your square, 2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. Zinc plating resists rust and corrosion - great for boat trailers.
Pre-greased, marine-grade hub is built for trailer idler axles. Fits 3.5K axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, cap, lug nuts, and cotter pin included. For 13" to 15" wheels.
Hey Chris! For your Hobie Mirage Tandem Island I recommend the Malone LowBed MicroSport Trailer #MPG464-LB. This has 78" crossbars with a 44" - 63" crossbar spread so it lines up nicely with your 61" cradle spacing. It’s also…
All axles, including the Trailer Axle with Idler Hubs #e25GR you referenced, are measured by capacity and two measurements (hub-face to hub-face & spring center to spring center). The hub-face to hub-face measurement ensures that your wheels will…
Since you are looking for a way to transport a kayak a much better solution for you would be a Yakima Rack and Roll trailer like part #Y08106 as this is rated for highway speeds. As always, exceeding posted speed limits is not recommended, especially…
It is not required to install a washer between the outer bearing and the castle nut on the Trailer Idler Axle Beam with Easy Grease Spindles part #e48GR. That said, it's not a bad idea to use one and I recommend this to ensure there is no damage…
In order to find the correct replacement hubs for your EZ Loader boat trailer you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped…
Thanks for reaching out, Michael, and yes, I can help. I looked up the Karavan part number 310-0347-A and it appears this is a hub for a standard 3,500 lb axle. It uses the #L68149 (1.378" inner diameter) inner bearing and the #L44649…
Hey Bill! That happens sometimes so I'm glad you submitted it again. The CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 already comes with a winch and the bunk boards so you're set there. The only other thing you might…
We carry 4 double-eye springs that are 26 inches long. I've linked our selection for you to check them out and choose the weight capacity you need. Shackle straps that are 5-1/4 inches center on center is very long. The longest we carry is only…
I do have some options for you however, the Blue Ox Hitch Extender for Tow Bars #BX88264 is only to be used for flat towing a vehicle, not for towing a trailer. Instead, the Brophy Hitch Extender with Step #ST18 can be used to tow, will extend 18…
Hello R K, I do not have a database that supplies me with what is put on what trailers. In my search, I see that the Karavan Trailer, Model No. BW-2450-74-ST should be equipped with bearing numbers: inner bearing L68149 (1 3/8"), and outer…
I cross-referenced the National 471750 grease seal for you and found that the seal has a 1.98 inch outer diameter and a 1.25 inch inner diameter and a .25 inch thickness which is comparable to the #34823 double lip seal we offer. This being said,…
8-3/8" Long x 3-1/16" wide x 7/16" diameter, square U-bolt lets you safely mount a spare tire on your trailer. Constructed of zinc-plated steel, it holds 4-lug and 5-lug wheels up to 15" and includes 2 lug nuts.
9/16" Diameter shackle bolt is used to mount slipper spring inside hanger. Fluted shank keeps the bolt from turning in the bracket and wearing the bracket out. Sold in pairs. Includes locknuts.
11" Wide x 43-1/8" long x 12-1/2" tall. This fender is made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirt helps contain road debris.
Mount your square, 1-1/2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. Zinc plating resists rust and corrosion - great for boat trailers.
10" Wide x 40-1/4" long x 11-1/4" tall. This fender is made of durable, corrosion-proof, impact-resistant black polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirt helps contain road debris.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 6-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.
Shackle strap helps connect a double-eye leaf spring to rear hanger or equalizer on your trailer's suspension system. Allows the necessary pivot of the springs which evenly distributes the weight between the axles and provides a smoother ride.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.
8-7/8" Wide x 37-3/8" long x 9-1/2" tall. These fenders are made of durable, corrosion-proof, impact-resistant gray polypropylene. Top and side steps let you climb into and out of your trailer. Built-in skirts help contain road debris.
These sturdy square U-bolts let you secure 2 double U-bolt bolster brackets or 4 standard bolster or bunk board brackets to your boat trailer's frame. Galvanized steel is durable and corrosion resistant. Hardware included.
Mount your round, 1-3/4" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. Zinc plating resists rust and corrosion - great for boat trailers.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.
Zinc-plated steel U-bolt kit allows you to attach roller-, bunk-, or post-style guide-ons to your boat trailer with a frame up to 3" wide x 5-1/4" tall. Includes 2 sets of mounting U-bolts.
These guide-on posts make it easy to load your pontoon boat onto your trailer. They attach to the rear of your trailer and extend out of the water, providing a visual target to center the boat's pontoons around. Mounting hardware included.
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner bearing (L68149) and race, outer bearing (L44649) and race, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.
Filters
